Additional Planned Development Requirements
All Conceptual Plans shall be prepared on sets of sheets 24" x 36". A key map must be provides for easy navigation through the individual sheets. All site
plans are required to meet the City's design district standards. Plans shall contain the following information at a minimum (for a more comprehensive
listing, see the City of Wildwood Land Development Regulations, §8.4). In addition, all Planned Developments require a Planned Development
Agreement (LDR §8.6), the requirements of which are also outlined below.
Required on Conceptual Plan for All PD Submittals (LDR §8.4): Planned Development Agreement (LDR §8.6):
Legal Description of Property
Location Map
Zoning on Adjacent Parcels
Density and Intensity of Land Uses Throughout Site,
with Tabulations by Acreages and Percentages Thereof
Number, Type, and Location of All Recreation
Facilities, Open Space, and Preservation Areas, with
Tabulations by Acreages and Percentages Thereof
Number, Type, and Location of All Residential
Buildings and Dwelling Units
Square Footage and Location of All Nonresidential
Buildings
Internal Transportation Network and Facilities
Including Provisions for Pedestrian and Multi-Modal
Where Available
Identification of Adjacent External Transportation
Network
Location of Nearest Potable Water, Sanitary Sewer, and
Reuse Lines in Relation to the Project
Applicable Zoning Districts
Any Additional Data, Plans, or Specifications Pertinent
to the Proposed Project Determined at the Pre-
Application Conference
Name of Property, Applicant, or Petitioner
Legal Description of Property
Statistical Information
Total Acreage of the Site
Number of Residential Units per Dwelling Type
Number of Nonresidential Land Uses by Type and Size
(gross square footage) to be Allowed
Minimum Amount of Open Space to be Retained
Phasing Schedule (if applicable)
Statement Providing a Detailed Listing of Performance
Standards to be Adhered to by the PD
Standards for Building Setbacks
Lot Frontages
Residential Densities
Floor Area Ratio (FAR)
Impervious Surface Ratio (ISR)
Building Heights
Right-of-Way Widths
Other Applicable Standards
Statement Indicating the Project's Adherence to Design
District Standards
Measures for Water and Energy Conservation
Applicable Environmental Considerations
Access and Transportation Considerations
Entity Responsible for Maintenance of Open Space and
Common Areas
Demonstration of Internal and External
Interconnectivity for Infrastructure, Open Space, and
Environmental Systems
IMPORTANT: You will be issued a Project Number and Project Name after submitting your application. All future correspondence regarding your
project, including additional submittals or requests for additional documentation, should be directed to Development@wildwood-fl.gov
with your Project Number and Project Name in the subject line.
Note: If no significant construction has started on the approved planned development within 24 months of approval, the planned development agreement
shall lapse and be of no further effect, rendering the planned development agreement void. The City Commission may extend the planned development
agreement for periods of up to 12 months, provided the applicant can demonstrate why said development was delayed under the original approval.
Residential Planned Developments (RPD) shall be allowed in all single use residential FLU designations EXCEPT Agriculture-10 and Agriculture-5.
Commercial/Industrial Planned Developments (CIPD) shall be allowed in all single use nonresidential FLU designations.
Mixed Use Planned Developments (MUPD) shall be allowed in all mixed use FLU designations EXCEPT Residential/Institutional/Office or Residential Mixed Use.