Fillable Lutron electronics Energi Savr Node for DALI

Fill Online, Printable, Fillable, Blank Lutron electronics Energi Savr Node for DALI Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics Energi Savr Node for DALI

On average this form takes 25 minutes to complete

The Lutron electronics Energi Savr Node for DALI form is 20 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 98 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 1 09.27.19
Energi Savr Node for DALI®
The Energi Savr Node unit is a DALI-2® certified
single master DIN-rail mounted application controller
for DALI®-compliant digital addressable loads. It
provides DALI® bus power and control for two
independent DALI® buses with up to 64 DALI®-
compliant digital addressable dimming loads each.
The Energi Savr Node unit also provides direct
connections and power for the following Lutron
devices:
• Occupancy sensors
• Daylight sensors
• IR receivers
• QS devices
Features
• Single master application controller
• Provides power for two buses of DALI®-compliant
digital addressable dimming loads. 128 mA
guaranteed current, 250 mA maximum supply
current per bus.
• Supports up to 16 DALI® groups on each DALI® bus.
• Supports self-contained emergency fixtures
(function test, duration test, and prolong time).
• Supports two channel tunable-white applications
(one channel color temperature control and one
channel light intensity control) with Quantum V3.4.
• Lamp and control gear failure reporting
• Single channel control gear auto replacement
• Field configurable system failure level, min and max
levels, fade rate, and fade time.
• Power failure memory retains control unit
programming in the event of a power loss.
Energi Savr Node for DALI
®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
DALI® Compatibility
The Lutron DALI® Energi Savr Node (ESN) is DALI-2® certified by the Digital Illumination Interface Alliance (DiiA)®. In order to
ensure compatibility with Lutron DALI® controllers, the connected DALI® LED drivers and fluorescent ballasts must be
DALI-2® certified and marked. In addition to compatibility, it is important to select high-quality and high-performance LED
drivers and fluorescent ballasts. DALI-2® certified devices are readily available from many manufacturers and are tested for
compatibility with the standard. For a complete list of available DALI-2® certified devices, see the DiiA® website at
https://www.digitalilluminationinterface.org/products. DALI® devices that are not listed on the DiiA® website and are not
marked DALI-2® cannot be considered DALI-2® certified.
The DALI® version-1 standard does not ensure compatibility. To apply the original DALI® version-1 mark on LED drivers and
fluorescent ballasts, no verification of the test results was required, and manufacturers could self-declare compliance and
apply the DALI® mark. If you would like to use an LED driver or fluorescent ballast that is not DALI-2® certified but carries a
DALI® version-1 logo, Lutron recommends that these devices be tested to ensure compatibility. Lutron is able to perform
this testing on request. Samples of the drivers and light engines must be submitted to Lutron and the expected
turnaround time is 6 to 8 weeks after the drivers are received. Fees for testing may apply. Lutron recommends that this
testing be performed before the fixtures and lighting controls are purchased and installed. Contact your Lutron sales
representative for more information.
• Default configuration requires no commissioning.
• Four occupancy sensor inputs for automated control
of lights in areas.
• Four daylight sensor inputs automatically adjust light
levels based on the amount of natural light entering
through the windows.
• Four IR receiver inputs for personal control
• Add more occupancy sensors, daylight sensors, or IR
receivers by connecting QS Sensor Modules (QSMs).
• Includes QS link for seamless integration of lights,
motorized window treatments, control stations, and
QS Sensor Modules.
• Energi Savr Node units and QS Sensor Modules can
be used in a Quantum system to control and manage
light in an entire building.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 2 09.27.19
Typical Application: Requires commissioning
Occupancy
Sensor
Daylight
Sensor
Loop 2
Loop 1
Versaplex
QS
LUTRON
Wired to
sensor
group 4
Open Offices
Corridor
Private Offices
Occupancy
Sensor
QS Link
Occupancy
Sensor
Occupancy
Sensor
Energi Savr
Node QS
Energi Savr
Node QS
Daylight
Sensor
DALI
Loop
DALI
Loop
DALI
Loop
seeTouch
®
QS Wallstation
Window
Window
Window
LUTRON
Occupancy
Sensor
Daylight
Sensor
LUTRON
Occupancy
Sensor
Daylight
Sensor
LUTRON
Occupancy
Sensor
Daylight
Sensor
LUTRON
seeTouch
®
QS Wallstation
Occupancy
Sensor
Daylight
Sensor
LUTRON
DALI
Loop
DALI
Loop
DALI
Loop
QS Link
QS Link
Open Offices Corridor Private Offices
seeTouch QS Wallstation
seeTouch QS Wallstation
QS Link
QS Link
QS Link
WindowWindowWindow
Daylight
Sensor
Daylight
Sensor
Daylight
Sensor
Daylight
Sensor
Daylight
Sensor
Occupancy
Sensor
Energi Savr
Node
unit
Energi Savr
Node
unit
Occupancy
Sensor
Occupancy
Sensor
Occupancy
Sensor
Occupancy
Sensor
Occupancy
Sensor
Occupancy
Sensor
DALI
®
Bus
DALI
®
Bus
DALI
®
Bus
DALI
®
Bus
DAL
I
®
Bus
DALI
®
Bus
LUTRO
N
L
U
TR
O
N
R
LUTRON
L
U
TR
O
N
R
Up to 64 DALI-
compliant digital
addressable
loads on each
loop
QS Link
DALI Bus 1
DALI Bus 2
Control gear
Energi Savr
Node unit
Energi Savr
Node unit
Quantum
Panel
GRAFIK
Eye QS
QS Contact
Closure
Interface
seeTouch QS
Wallstation
220-240 V~
Control Power
Up to 100
total QS
devices
Ethernet
Programming Link
One input group shown;
connections available
for up to four input
groups.
Wireless
Communication
QSM
Radio Powr Savr
Occupancy Sensor (up
to 10 per QSM)
Radio Powr Savr
Daylight Sensor
(up to 10 per QSM)
Pico Wireless
Controller (up
to 10 per QSM)
Wired
Daylight
Sensors*
Wired
Occupancy
Sensors*
Wired
IR Receivers*
Note: Multiple QSMs can be
added to increase the number
of wireless sensors and Pico
wireless controllers.
IR Transmitter
IR Transmitter
Wired IR Receiver
Wired Daylight
Sensor
Wired Occupancy
Sensor
QS Power
Supply
Control gear Control gear
Control gear
* Up to 4 wired sensors total (of any type)
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 3 09.27.19
Preconfigured Mode 2
Two Zones with Occupancy Sensors
* Six fixtures shown on each bus, however,
up to 64 fixtures can be connected per
bus.
Preconfigured Mode 1
Perimeter Daylighting
* Four fixtures shown on Bus 1 and eight
fixtures shown on Bus 2, however, up to
64 fixtures can be connected per bus.
Occupancy Sensor Daylight Sensor
Connected to input group 1 Controls Bus 1 only Controls Bus 1 only
Connected to input group 2 Controls Bus 2 only Controls Bus 2 only
Connected to input group 3 Controls both Buses Controls both Buses with equal daylight gain
Connected to input group 4 Controls both Buses Controls both Buses with lower daylight gain on Loop 2
Default Behavior for Sensor Connections
Simple Applications: Preconfigured modes require no commissioning
Troubleshooting and Maintenance Features
• Maintains redundant memory of control gear programming for ease of single or multiple control gear replacement.
• After installation, "TEST" button verifies DALI® wiring on all fixtures.
• Status LEDs verify connections to control stations and sensors.
• After installation, Energi Savr Node unit identifies control gear communication failures.
LUTRON
Perimeter Interior
WindowWindow
Daylight
Sensor
Wired to
input
group 4
Energi Savr
Node unit
Occupancy
Sensor
Bus 1 Bus 2
Perimeter Interior
WindowWindow
Wired to
input
group 2
Wired to
input
group 1
Energi Savr
Node unit
Occupancy
Sensor
Occupancy
Sensor
Bus 1
Bus 2
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 4 09.27.19
Specifications
Power
• 220–240 V~ 50 / 60 Hz, max current draw 100 mA
• Lightning strike protection meets ANSI / IEEE standard
62.31-1980. Can withstand voltage surges of up to
6000 V~ and current surges of up to 3000 A.
• DALI® Bus Output: 18 V- 128 mA guaranteed supply
current, 250 mA maximum supply current per bus.
Standards
• IEC 60669-2-1
• DALI-2® certified
• Lutron Quality Systems registered to ISO 9001:2015.
• For commercial use, Class A only.
Environment
• Ambient Temperature Operating Range: 0 ºC to 40 ºC.
• Relative humidity: less than 90% non-condensing.
• For indoor use only.
Terminals
• Mains wiring: 1.0 mm
2
to 4.0 mm
2
(12 AWG to 18 AWG)
• DALI® Bus Wiring: 0.5 mm
2
to 4.0 mm
2
(12 AWG to 22 AWG)
• QS Link Wiring: 0.5 mm
2
to 4.0 mm
2
(12 AWG to 22 AWG)
• Input Wiring: 0.5 mm
2
to 2.5 mm
2
(14 AWG to 22 AWG)
Mounting
• Intended to mount within an IP20 (minimum) rated
consumer panel or breaker panel with integrated DIN
rail and dead cover.
• Width = 9 modules (161.7 mm).
• For more information on mounting and installation in
panels with integrated DIN rail see Lutron
P / N 048466 at www.lutron.com
Programming Requirements
• An Apple iPod touch or iPhone mobile digital device
with the Energi Savr app is required for programming
Energi Savr Node systems.
• The Energi Savr app is available from the App Store
online store.
• The Energi Savr app cannot be used to program the
Energi Savr Node units when installed as part of a
Quantum system.
• The Apple iPod touch or iPhone communicates with
the Energi Savr Node unit via a WiFi router
(not included).
• See the Programming Options section for further
information.
DALI® Buses
• Up to 64 DALI® compliant dimming loads on each bus
can be addressed and grouped into 16 zones.
• Energi Savr Node unit has an integrated bus power
supply that provides a guaranteed current of 128 mA
(maximum of 250 mA) to power each bus.
• Energi Savr Node unit is a single master controller and
therefore no other controllers may exist on the same
DALI® bus.
• Some DALI® loads may be polarity sensitive; refer to
individual manufacturers’ specifications for proper
connection to the DALI® bus.
• Short circuit protection with automatic re-start.
QS Link Limits
• A QS link can have up to 100 zones (outputs) and
100 devices.
• Each Energi Savr Node unit counts as one device
toward the 100 device limit.
• Each assigned zone counts toward the 100 zone limit.
• Each Energi Savr Node (QSNE-2DAL-D) unit can
supply 3 power draw units. Refer to the QS Link
Power Draw Units specification submittal (Lutron
P/N 369405) for more information concerning Power
Draw Units.
QS Link Sensor Limits:
• 100 wired or wireless occupancy sensors.
• 100 wired or wireless daylight sensors.
• 100 wired wallstations or Pico wireless controllers.
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 5 09.27.19
Sensors Connected to the
Energi Savr Node Unit
• Power Supply Outputs (4)
- 20 V- 50 mA maximum.
- An auxiliary power supply must be used if the
device requires more than 50 mA.
Occupancy / Vacancy Sensors
• Use vacancy sensors to automatically turn the lights
off in an area a fixed time after it becomes vacant.
• Use occupancy sensors to automatically turn the
lights on in area when it becomes occupied and
to automatically turn the lights off in an area a fixed
time after it becomes vacant.
• Four occupancy sensors can connect directly to the
Energi Savr Node unit.
• Each area's occupied level and unoccupied level
can be programmed.
• Occupancy sensor must provide a dry contact
closure or solid-state output.
Daylight Sensors
• Lutron daylight sensors allow daylight harvesting
with programmable gain settings in up to four gain
groups per area.
• Four daylight sensors can connect directly to the
Energi Savr Node unit.
IR Controls
• Use Lutron IR receivers or wired Pico keypads for
personal control of individual lighting zones.
• Four IR devices can connect directly to the
Energi Savr Node unit.
Other QS System Components
QSM (QS Sensor Module) - Integrating Wired and
Wireless Inputs
• Use the QSM to integrate Radio Powr Savr
Occupancy / Vacancy sensors, Radio Powr Savr
Daylight sensors, and Pico Wireless Controllers to
control zones on the Energi Savr Node unit.
• Assign up to 10 Radio Powr Savr Occupancy / Vacancy
sensors per Energi Savr Node unit via QSM.
• Assign up to 10 Radio Powr Savr Daylight sensors per
Energi Savr Node unit via QSM.
• Assign up to 10 Pico Wireless Controllers per Energi
Savr Node unit via QSM.
• Add additional wired and wireless inputs by adding
QS Sensor Modules to the QS link.
• Wire and power up to 4 wired inputs (of any type) total
— Daylight sensors
— Occupancy sensors
— Infrared (IR) receivers
• The Radio Powr Savr sensors and Pico Wireless
Controllers associated with the QSM should be
mounted within 18 m line of sight, or 9 m through
walls, of the QSM.
• Refer to QSM Specification Submittal
(Lutron P/N 369242) for more information.
seeTouch QS Controls
• seeTouch QS wallstations can be configured to
control Energi Savr Node unit zones.
• Select one of 16 scenes and off in Energi Savr Node
unit areas.
• Control individual lighting zones in Energi Savr Node
unit areas.
• Each Energi Savr Node unit can power up to three
seeTouch QS controls.
• LED indicator displays the status of programmed
lights.
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 6 09.27.19
Other QS System Components (continued)
Communication with GRAFIK Eye QS control units
• Energi Savr Node unit zones can be configured to
respond to GRAFIK Eye QS scene buttons when
associated with the GRAFIK Eye QS.
• Energi Savr Node unit zones can be configured
to respond to scene commands initiated by the
GRAFIK Eye QS astronomic time clock when
associated with the GRAFIK Eye QS.
• Energi Savr Node unit operates in afterhours mode
when associated with a GRAFIK Eye QS that is in
afterhours mode.
Communication with QSE-IO
• Energi Savr Node unit zones respond to scene
commands initiated by the QSE-IO in scene selection
mode or occupancy sensor mode.
• Energi Savr Node unit can be configured to respond to
zone toggle or occupancy sensor commands initiated
by the QSE-IO in zone toggle mode or occupancy
sensor mode.
Communication with QSE-CI-NWK-E
• Integrate Energi Savr Node units with touchscreens,
PCs, A/V systems or other digital systems and devices.
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 7 09.27.19
Mechanical Dimensions
161.7 mm
60.6 mm
89.7 mm
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
7
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 8 09.27.19
Overview of Wiring Terminals
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Mains
Wiring
DALI®
Bus 1*
DALI®
Bus 2*
QS
Link
Inputs
Ethernet
Programming
Port
* Wire DALI® according to local codes.
PELV
8
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 9 09.27.19
Wiring: Mains Voltage
Wiring from Distribution to Bus Supply
• Turn off breaker at distribution panel.
• Run line, neutral, and wires from a
220 –240 V~ 50 / 60 Hz feed to the
Energi Savr Node unit.
Emergency Lighting Applications
• Use normal (non-essential) power only.
• When normal power drops out, the Energi Savr Node
unit will not power the DALI® buses. When this
occurs, control gear powered from emergency feeds
go to their emergency mode (full light output by
default).
Mains Wiring and Low Voltage Separation
• The Energi Savr Node unit is designed to separate
mains wiring from PELV circuits.
• Follow appropriate local and national codes to avoid
violating required separation guidelines.
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
N
L
N
L
Distribution
Panel
– Earth / Ground
– Neutral
– Mains / Line
9
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 10 09.27.19
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Wiring: DALI® Bus
The Energi Savr Node unit will supply power to an
independent DALI® bus, which supports a maximum
of 64 DALI®-compliant digital addressable loads per
bus.
DALI® Wiring
• DALI® wiring is not SELV.
• DALI® wiring is treated as mains voltage, and thus
may be run within the same sheathing.
• Ensure that there is no greater than a 2 V~ drop
between the Energi Savr Node unit and the end of
the DALI® Bus.
• Consult all national and local electrical codes for
separation requirements.
Wire Gauge
Maximum DALI®-compliant
Bus Wire Length
1.5 mm
2
(16 AWG)
300 m
0.75 mm
2
(20 AWG)
150 m
0.50 mm
2
(22 AWG)
100 m
DA 1 -
DA 1 +
DA 2 +
DA 2 -
DALI®
Bus 1
DALI®
Bus 2
10
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 11 09.27.19
Wiring: QS Link
IEC PELV QS Link Wiring
• Link communicates using IEC PELV wiring.
• Follow all applicable national and local codes for
proper circuit separation and protection.
• Wiring may be daisy chained or t-tapped.
• Total length of QS link must not exceed 610 m.
QS Link
Wiring Length Wire Gauge
Available from
Lutron in one cable:
Less than
153m
Power (terminals 1 and 2):
1 pair 1.0mm
2
(18 AWG)
GRX-CBL-346S
(non plenum)
GRX-PCBL-346S
(plenum)
Data (terminals 3 and 4):
1 pair 0.5mm
2
(22 AWG),
twisted and shielded
153m to
610m
Power (terminals 1 and 2):
1 pair 4.0mm
2
(12 AWG)
GRX-CBL-46L
(non plenum)
GRX-PCBL-46L
(plenum)
Data (terminals 3 and 4):
1 pair 0.5mm
2
(22 AWG),
twisted and shielded
• Use one, twisted-shielded pair of 0.5 mm
2
(22 AWG)
for data link (MUX, _).
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
(1)
(2)
(3)
(4)
COM
24 V-
MUX
MUX
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
11
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 12 09.27.19
Wiring: QS Link (continued)
Only terminals 1, 3, and 4 connected
between devices that supply PDUs
Terminal 2 NEVER
connected between devices
that supply PDUs
Terminal 2 (+24 V)
NEVER connected*
Devices that
supply PDUs
Devices that
consume PDUs
COM
+24 V
MUX
MUX
COM
MUX
MUX
Energi Savr
Node unit
Energi Savr
Node unit
QS
Input /
Output
Interface
Wired
QS
Keypad
QSM
QSMQSM
Wired
QS
Keypad
Wired
QS
Keypad
Wired
QS
Keypad
QS
Input /
Output
Interface
QS
Link
power
supply
QS Link;
all 4 terminals
QS Link;
no terminal 2
QS Link;
no terminal 2
QS Link;
all 4 terminals
QS Link;
all 4 terminals
Terminal 2 (+24 V)
NEVER connected*
Terminal 2 (+24 V)
NEVER connected*
**
All 4 terminals connected to QS link
devices that consume PDUs
QS Link Wiring Rules
* Terminal 2 (+24 V) should NEVER be connected between devices that supply PDUs.
** For QS Link power supply wiring connection details, refer to the installation instructions
for the specific power supply model being used.
12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 13 09.27.19
Energi Savr Node for DALI®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Wiring: IEC PELV Inputs
Electrical Contractors and Engineers
• All sensor wiring is IEC PELV. Follow all applicable
national and local codes for proper circuit separation
and protection.
• IEC PELV input terminals accept 0.5 mm
2
–2.5 mm
2
(12 AWG–22 AWG) solid conductors.
• Mains voltage and IEC PELV wiring must be kept
separate.
Wiring Instructions
• Turn off circuit breaker or isolator at distribution panel.
Occupancy Sensor
• Connect three conductors to three terminals as shown.
• One occupancy sensor can be wired to each input
group.
• Sensor must be placed within 30 m of the
Energi Savr Node unit.
IR Receiver
• Connect the three conductors to the three terminals
as shown.
IR Receiver (continued)
• Receiver must be placed within 30 m of the
Energi Savr Node unit.
• One IR Receiver can be wired to each input group.
• If a daylight sensor and IR receiver are connected,
do not connect the daylight sensor's IR output
(white wire).
Daylight Sensor
• Connect the four conductors to the four terminals as
shown.
• Terminals:
Red = 20 V- White = IR
Black = Common Yellow = Daylight
• Daylight Sensor must be placed within 30 m of the
Energi Savr Node unit.
• One daylight sensor can be wired to each input group.
• Consult the daylight sensor specification sheet
(Lutron P/N 369244) to properly locate the sensor.
• Do not place the sensor above pendants, fixtures,
directly below lighting fixtures, or within skylight wells.
NOTE: There
are four sensor
groups. Each
group wires the
same and is
shown above.
Energi Savr Node for DALI®
QSNE-2DAL-DQSNE-2DAL-D
230 230 VV~~ 5050//60 Hz 60 Hz 1100 mA00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Sensor Group 1
Sensor Group 3
Sensor Group 2
Sensor Group 4
* Note: Only one IR device may be connected per
input group. If the IR signal from a daylight sensor is
connected, another control may not be connected to
the same input, and vice-versa.
** Connect the gray wire on -R Occupancy Sensor
models.
IR Transmitter
20 V – 20 V-
IR – IR Receiver *
Photo – Daylight Sensor
Energi Savr Node for DALI
®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Energi Savr Node for DALI
®
QSNE-2DAL-D
QSNE-2DAL-D
230
230
V
V
~
~
50
50
/
/
60 Hz
60 Hz
1
1
00 mA
00 mA
Test
Hi Temp
Power
lutron.com
1.844.LUTRON1
+44.(0)20.7702.0657
MUX
COM
MUX
QS
DA 1DA 2
LN
Ethernet
1122
3344
20 V
IR
Photo
Occ
Com
20 V
IR
Photo
Occ
Com
24 V
+
-
+
-
Assembled in Mexico
Assemblé aux Mexique
Ensamblado en México
EEA contact address:
Lutron EA Limited
125 Finsbury Pavement, 4th floor
London EC2A 1NQ
United Kindom (Importer)
0,5 N•m (5 in-lbs)
8 mm
Occ – Occupancy Sensor
Com – Common
20 V – 20 V
-
IR – IR Receiver *
Com – Common
Occupancy Sensor
Red
Red
Black
Black
Blue/Gray**
Yellow
Black
White*
LUTRO
N
R
LUTRO
N
R
LUTRON
IR Transmitter
Group 1 shown Group 2 shown
Daylight/IR Sensor*
IR Receiver*
White*
Red
13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr Node for DALI® QSNE-2DAL-D DALI® Fixture Controller
369243j 14 09.27.19
Programming Options
Programming with Apple iPod touch or iPhone
• Use the intuitive programming application for the Apple iPod touch or iPhone to program systems with
multiple Energi Savr Node units and QSMs on the QS link.
• Wireless router only required for programming with an Apple iPod touch or iPhone.
• Wireless router may be removed for normal operation.
• Ethernet connection may be made via integral Ethernet jack.
• Lutron recommends that integral Ethernet jack be wired to an Ethernet jack in the space for ease of access and
proximity to power for the wireless router.
• Works with any standard wireless router that supports multicast packets.
• Apple iPod touch or iPhone can program all Energi Savr Node units connected to the QS link (except when
part of a Quantum system).
• Energi Savr app is required and is available from the Apple App Store online marketplace.
)Lutron, Lutron, Quantum, Pico, GRAFIK Eye, seeTouch, Energi Savr Node, and Radio Powr Savr are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.
Apple, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
All other product names, logos, and brands are property of their respective owners.
* Note: Energi Savr Node units are not designed to exist on an open network. Connection to an open network could result in reduced performance and
Ethernet connectivity issues.
QS Link QS Link
Energi Savr
Node unit
QSM
Dedicated
Ethernet
Connection for
Energi Savr Node
units*
Apple
iPod touch
or iPhone
mobile digital
device
Wireless
Router
(by others)
1 1
2
2
Wire types:
1 Less than 153 m: Lutron cable
GRX-CBL-346S
153 m to 610 m: Lutron cable
GRX-CBL-46L
2 Standard CAT5/CAT5E cable: Total
length not to exceed 100 m
14
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics Energi Savr Node for DALI

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 14 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document