Power
• Input power: 120 V , 220-240 V (non-CE),
230 V (CE), or 100 V . All voltages 50/60 Hz,
phase-to-neutral.
• Load (output) power: Phase independent of Control
Unit.
Sources/Load Types
• Operates electronic low-voltage lighting with a
smooth continuous Square Law dimming curve or
on a full conduction non-dim basis.
– Does not affect sound rating of electronic
transformers.
– Does not cause lights to flicker or interact
anywhere in dimming range.
– Dims to 0% (blackout).
• Works only with electronic (solid-state) low-voltage
transformers that are manufacturer-approved for
reverse-phase control dimming.
• Incandescent and electronic low-voltage sources
may be controlled on the same zone. Up to 30% of
the ELVI capacity may be used for incandescent
lighting.
Key Design Features
Patented RTISS
TM circuitry compensates in real time
for incoming line voltage variations: No visible flicker
with +/-2% change in RMS voltage/cycle and +/-
2% Hz change in frequency/second.
Terminals
Accept up to two #12 AWG (2.5 mm
2
).
Environment
32 - 104 °F (0 - 40 °C). Relative humidity less than
90% non-condensing.
Mounting
Surface or recess mount indoors only.
Specifications
