Fillable Lutron electronics Electronic Low-Voltage Transformers Type 2 Enclosure

Fill Online, Printable, Fillable, Blank Lutron electronics Electronic Low-Voltage Transformers Type 2 Enclosure Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics Electronic Low-Voltage Transformers Type 2 Enclosure

On average this form takes 5 minutes to complete

The Lutron electronics Electronic Low-Voltage Transformers Type 2 Enclosure form is 3 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 21 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
elvxf2-1 10.14.04
ELV Transformers
Type 2 Enclosure
LUTRON
Electronic Low-Voltage Transformers
Type 2 Enclosure
Description
Lutron’s SELV-equivalent step-down converter for
halogen lamps works with Lutron’s leading or
trailing edge 230V (CE) products. The ELVXF
incorporates short-circuit, thermal, and overload
protection with self-resetting capabilities. Available
in 60W or 105W rated models.
Models Available:
ELVXF-60-T20-CE
ELVXF-105-T20-CE
ELVXF-105-L23-CE
ELVXF-60-T20-CE
ELVXF-105-T20-CE
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
elvxf2-2 10.14.04
ELV Transformers
Type 2 Enclosure
LUTRON
Input Power
• 230-240V AC ± 10% 50/60Hz
• At 60W, 0.28A; at 105W, 0.45A
• Power factor (λ, Cos >∅) 0.98 (Class II)
• Efficiency (η) > 95%
Output Power
• 11.7V AC 35kHz
• 60W: 10-60W; 105W: 35-105W
• SELV-Equivalent
Standards
• Safety: EN 61347.2.2
• Performance: EN 61047
• EMC: EN 55015
• Transient: EN 61547
• Harmonics: EN 61000.3.2
Approval Marks
•CE
• VDE (not ELVXF-105-L23-CE)
Environment
• 10 – 50°C
• Relative humidity less than 90% non-
condensing
Mounting
• Screw (No. 6) fixing located under each
terminal cover/strain relief.
Physical Design
• Case dimensions:
150mm x 42mm x 32mm (LxWxH)
• Case material: Flame retardant
Polycarbonate (PC940)
• Weight: 60W, 130g (without leads)
105W, 141g (without leads)
• tc max: 60 W, 85°C; 105W, 95°C
Measured at test point
• Ingress protection: IP20
• Label: Tamper printed
Terminals
• Input: 2-way screw terminal block accepts 2.5 mm
2
wire.
Two sets of two.
• Output: 2-way screw terminal block accepts 4.0 mm
2
wire.
Two sets of three.
• Maximum torque: 0.34 N
•
m (3 lbf
•
in)
Wire Attachment
ELVXF-60-T20-CE
• No wires attached.
• 0.8 N·m (7 lbf·in) torque on the screw holding the strain relief.
ELVXF-105-T20-CE
• No wires attached.
• 0.8 N·m (7 lbf·in) torque on the screw holding the strain relief.
ELVXF-105-L23-CE
• Input: 0.5m x 0.75mm
2
twin flat PVC/PVC 105 °C (short
duration) attached to one of the primary connections.
• Output: no wires attached.
• 0.8 N·m (7 lbf·in) torque on the screw holding the strain relief.
Model Number Description
Specifications
E L V X F - 1 0 5 - T 2 0 - C E
Indication of Wire Attachment
T = terminals only (no wires)
L = lead wires attached
Standard Suffix
Standard Prefix
Power Rating
60 = 60W
105 = 105W
Enclosure Type
1 = Type 1 (access on one end)
2 = Type 2 (access on both ends)
Wire Attachment
0 = no wires (terminals only)
1 = 1 pair of wires on secondary
2 = 1 pair on primary and secondary
3 = 1 pair on primary
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
elvxf2-3 10.14.04
ELV Transformers
Type 2 Enclosure
LUTRON
AC power from
Lutron Dimmer
0.50m maximum distance
0.15m minimum distance
• Pull 2.5 mm
2
Cu 75°C minimum wires for input and load connections.
• Keep the distance between the load and the transformer to a maximum distance of 0.5 meters, and a
minimum of 0.15 meters.
For use with the following controls:
Lutron Commercial Products
GXI-3___-_-CE-__
GRX-3___-_-CE-__
LP 4E Module
LP 4U Module
NGRX-ELVI-CE-WH
NGRX-PB-CE-WH
GP Dimming Panel
Lutron Residential Products
HWI 4E Modules
HWI 4U Modules
HWA-5E
HNA-5E
TM-ELV500-__
TIR-ELV500-__
TM-MLV500-__
TIR-MLV500-__
Restrictions
None
None
None
None
None
None
None
Restrictions
None
None
None
None
None
None
250W Maximum Load
250W Maximum Load
Note: Do not mix electronic and magnetic transformers on the same circuit.
Wiring
...
3
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics Electronic Low-Voltage Transformers Type 2 Enclosure

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 14 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document