Fillable Lutron electronics EM-A-BAC-IP-120

Fill Online, Printable, Fillable, Blank Lutron electronics EM-A-BAC-IP-120 Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics EM-A-BAC-IP-120

On average this form takes 12 minutes to complete

The Lutron electronics EM-A-BAC-IP-120 form is 7 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 49 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 1 10.26.11
EM-A-BAC-IP-120
Integrates a Lutron Centralized Lighting Control System
with digital equipment that supports BACnet®
communication over TCP/IP
• Allows a BACnet® system to read status from a Centralized
Lighting Control System processor.
• Allows a BACnet
® system to read status from a Centralized
Lighting Control System Processor in one of two modes:
– Individual zone* control of up to 512 zones.
– Scene selection for up to 500 spaces.
• Uses BACnet® Ethernet protocol only.
• The system is limited to a maximum of 1024 BACnet® points.
• System status refresh rate is determined by the number of
spaces or zones that are being monitored. The maximum
delay is 5 minutes for a system with 1000 BACnet® points
that need to be refreshed.
* Lighting Zone Controllers, OMX-3600, SO-SVC, and CCOs cannot be
controlled by zone control.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 2 10.26.11
Specifications
Regulatory Approvals
• UL listed
• cUL listed
Power
Operating voltage:
120 V~ 50/60 Hz
Maximum current: 200 mA
Terminals: Use copper wire only. Wire range 14 to 10 AWG
(1.5 to 4.0 mm
2
). Supply conductors minimum 167 °F (75 °C)
Connections.
• One (1) RJ45 10BaseT jack for communication with the
BACnet® client.
• One (1) RS485 jack for Centralized Lighting Control System
Aux link.
Zone Functions:
– Set zone intensity
– Read zone intensity
Space Functions:
– Set scene in space
– Read last scene set in space
System Communications and Capacity
• One EM-A-BAC-IP-120 Control Interface per Centralized
Lighting Control System processor panel.
Environment
• 32 °F to 104 °F (0 °C to 40 °C) operating temperature
• Maximum 90% relative humidity (non-condensing)
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 3 10.26.11
Dimensions and Weight
• All dimensions are shown as inches (millimeters).
• Leave at least 6 in (152 mm) clearance on the bottom and right hand side of the enclosure to access the plug-in ports, the
programming button and the status/operation LEDs.
• 6.5 lbs (2.95 kg)
Knockout for
High-Voltage Wiring
0.865 in (22 mm)
Front View (Cover Removed)
Bottom Side View
Right Side View
6.10 in
(155 mm)
4.0 in
(102 mm)
12.5 in
(317 mm)
11.75 in
(298 mm)
BACnet® IP Connection
and Diagnostics
Lutron® Protocol
Auxiliary Link
3.30 in
(84 mm)
1.05 in
(27 mm)
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 4 10.26.11
Wiring
Power should be wired to the terminal blocks in the unit throught the knockout at the top of the can. Use copper wire only.
Wire range 14 to 10 AWG (1.5 to 4.0 mm
2
). Supply conductors rated minimum 167 °F (75 °C). Torque terminals to 5 in-lbs
(0.7 N•m). Do not touch exposed circuitry on low-voltage side.
To BACnet
® IP
RJ45 Category 5 Cable
High-Voltage Wiring
14 to 10 AWG (1.5 to 4.0 mm
2
)
Earth Ground
Neutral
Line 120 V~ 50 / 60 Hz
Low-Voltage
Static Sensitive
To Centralized Lighting
Control System Panel
Auxiliary Link
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 5 10.26.11
Operation and Status
Power & Communication Status
The device provides power and communication status information using the LEDs visible on the BOTTOM SIDE of the enclosure.
BACnet
® Ethernet Link Rx/Tx
Ethernet Link OK
Power OK
Not Used
Device Running
Configuration Error
Communication Error
System Error
Node Offline
Not Used
Service Button
(used to set address)
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 6 10.26.11
BACnet® Protocol Implementation Conformance Statement (PICS)
Date: 31 May 2011
Vendor Name: Lutron Electronics Co., Inc.
Product Name: Centralized Lighting Control System BACnet® Integrator
Product Model Number: EM-A-BAC-IP-120, EM-A-BAC-ET-120
Applications Software Version: V6.06p (E) Firmware Revision: V5.22fA (K) BACnet® Protocol Revision: V2.01 bL
Product Description:
Both the EM-A-BAC-IP-120 and EM-A-BAC-ET-120 are gateway interfaces between a BACnet® Building Automation System
and the Lutron® GRAFIK Centralized Lighting Control System. The BACnet® gatateway exports a single BACnet® device with
objects that retrieve the status and perform actions through the Centralized Lighting Control System. The BACnet® gatateway
can interface with either the zones or the spaces dened in a GRAFIK Centralized Lighting Control System. Both zone control
and space control are not possible through the same device. If congured to interface with zones on the GRAFIK Centralized
Lighting Control System, the interface is able to retrieve the relay status and current intensity and set a desired intensity for
each zone in the system. If congured to interface with spaces on the GRAFIK Centralized Lighting Control System, the
interface is able to retrieve the last scene set in the space. The space is controlled by selecting a desired scene. A processor
can only move one EM-A-BAC-IP-120 or EM-A-BAC-ET-120 gateway interface.
BACnet® Interoperability Building Blocks Supported (Annex K):
K.1.1 BIBB - Data Sharing - ReadProperty-B (DS-RP-B)
K.1.3 BIBB - Data Sharing - ReadPropertyMultiple-A (DS-RPM-A)
K.1.4 BIBB - Data Sharing - ReadPropertyMultiple-B (DS-RPM-B)
K.1.8 BIBB - Data Sharing - WriteProperty-B (DS-WP-B)
K.1.9 BIBB - Data Sharing - ReadPropertyMultiple-A (DS-WPM-A)
K.1.10 BIBB - Data Sharing - ReadPropertyMultiple-B (DS-WPM-B)
K.5.2 BIBB - Device Management - Dynamic Device Binding-B (DM-DDB-B)
BACnet® Standardized Device Profile (Annex L):
BACnet® Smart Sensor (B-SS)
BACnet® Smart Actuator (B-SA)
Segmentation Capability:
Segmented requests supported? No Window Size n/a
Segmented responses suppored? No Window Size n/a
Non-Standard Application Services:
The EM-A-BAC-IP-120 does not support non-standard application services.
Standard Object Types Supported:
Device
Analog Input/Output
Binary Input/Output
Multistate Output
Binary Variable
Analog Variable
Data Link Layer Options:
BACnet® Ethernet, (Annex J)
Device Address Binding:
Is static device binding supported? No
If this product is a communication gateway, describe the types of non-BACnet® equipment/network(s) that the
gateway supports:
Both the EM-A-BAC-IP-120 and EM-A-BAC-ET-120 are gateway interfaces between a BACnet® protocol and the Lutron
Centralized Lighting Control System communication protocol.
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
GRAFIK Systems BMS InterfaceEM-A-BAC-IP-120
369-511a 7 10.26.11
BACnet® Objects
The following tables list the BACnet® objects available through this interface. Refer to the User Guide for a complete description
of each object listed below. The names of the objects are congurable.
Space Machine Interface*
Analog Input[1..512] Last system scene selected
Analog Output[1..512] Desired scene for space
Binary Input[1..512] Reserved for expansion***
Binary Output[1..512] Reserved for expansion***
Multistate Output[1..512] Reserved for expansion***
Analog Output[513..1024] Reserved for expansion***
Binary Value[1..512] Reserved for expansion***
Analog Value[1..512] Reserved for expansion***
* BACnet
® object ID 1 corresponds to System Space 0, object ID 2 corresponds to System Space 1 and so on.
** BACnet® object ID 1 corresponds to System Zone 0, object ID 2 corresponds to System Zone 1 and so on.
*** These objects are reserved by Lutron for future modications and customization of the system.
Zone Machine Interface**
Analog Input[1..512] Current zone intensity (%)
Analog Output[1..512] Desired zone intensit (%)
Binary Input[1..512] Reserved for expansion***
Binary Output[1..512] Reserved for expansion***
Multistate Output[1..512] Reserved for expansion***
Analog Output[513..1024] Reserved for expansion***
Binary Value[1..512] Reserved for expansion***
Analog Value[1..512] Reserved for expansion***
BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
7
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics EM-A-BAC-IP-120

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 14 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document