SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® CC-1BRL 1-Button Wallstation
369406a 2 09.19.11
Power
• Operating Voltage: Low-voltage Class 2, 20 V-
• Output Signal: 0–20 V-
• Current Draw: 15 mA maximum
Environment
• Temperature: 32 to 113 °F (0 to 45 °C)
• Relative humidity: less than 90% non-condensing
Dimensions
• Including Claro
® wallplate (sold separately)
Specifications
Standards
• UL Listed to US and Canadian safety standards
• cUL Listed
• Designed for Class 2 operation only. Voltages do
not exceed 35 V-. Complies with requirements
of NFPA 70, of the National Electric Code (NECR)
• Follow all applicable national and/or local wiring
regulations when installing this wallstation
• For use with EcoSystem
® products, Energi Savr
Node
TM and Quantum®
Mechanical
• Gloss nish available in White, Black, Light
Almond, and Ivory
• LED ashes in response to button presses and
programming commands
Notes
• Total wire length from keypad to device must not
exceed 100 ft (30 m)
• Lead wires for connection to device
Wiring
White
Red
Black
Wiring to EcoSystemR Ballast, Ballast
Module, Energi Savr NodeTM or QS Sensor
Module (QSM)
• Wire color designations:
Red = 20 V-
Black = Common
White = Signal (IR terminal on ballast or
module)
• Make sure that the supply breaker for the
EcoSystemR device to which the control will
be connected is OFF
• Connect the three conductors to the
appropriate terminals of the EcoSystemR
ballast, ballast module, Energi Savr Node
TM or
QS Sensor Module (QSM)
4.69 in
(119 mm)
Profile
Front
2.94 in
(75 mm)
1.45 in
(37 mm)
2.5 in
(64 mm)
