Fillable 369988 ENG (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank 369988 ENG (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369988 ENG (Lutron Electronics, Inc.)

On average this form takes 18 minutes to complete

The 369988 ENG (Lutron Electronics, Inc.) form is 16 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 70 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 1 02.16.17
The CE-rated Hi-lume 1% Constant-Voltage Driver
(LDE1) is a high-performance LED driver capable of
controlling up to 96 W of 24 V- constant-voltage
loads. This driver provides smooth and continuous
dimming down to 1% low-end. It is ideal for use with
strip lighting in applications such as coves, under / over
cabinet and pathway lighting. The driver is designed
with an integrated wiring compartment for ease of
installation.
Features
• Continuous, flicker-free dimming from 100% to 1%
• Soft-on, Fade-to-Black dimming technology: Fades
smoothly between 0% and 1% when turned on and
off for an incandescent-like experience
• PWM dimming meets IEEE1789 throughout entire
dimming range
• CE / ENEC rated
• SELV output
• Independent control gear
• Cord grips and grommets provided
• Remote mounting - up to 50 m (164 ft)
• Guaranteed dimming performance when used with
Lutron controls:
– HomeWorks QS, Energi Savr Node units with
EcoSystem, PowPak dimming module with
EcoSystem, and Quantum systems, allowing for
integration into a planned or existing EcoSystem
lighting control solution.
– Energi Savr Node units with DALI, GRAFIK Eye
QS with DALI, and Quantum systems, allowing for
integration into a planned or existing DALI lighting
control solution.
• Protected from miswires of input power, up to
240 V~, to EcoSystem control inputs...
• Rated lifetime of 50 000 hours at 40 °C (104 °F)
ambient temperature and maximum output power.
• CISPR 15 compliant at 220
V~
to 240 V~.
Hi-lume 1% EcoSystem Constant-Voltage
24 V- LED Driver with Soft-on,
Fade-to-Black Dimming Technology
Hi-lume 1% Voltage Driver (LDE1)
140 mm (5.5 in) W x 51 mm (2.0 in) H x 267 mm (10.5 in) L
50016452a
lutron.com
B1
0
78427
6
180337
220 - 240 V 50 / 60 Hz 0,48 A 110 W Max λ = 0,98
Soft-on, Fade-to-Black
EcoSystem Constant Voltage LED Driver
LDE1-96W24V-E
/ FXD196CEU
Technical Support: +44.(0)20.7680.4481
Primary:
Secondary:
Uout = 24 V 4 A Max SELV 96 W
Warranty void if inner plastic cover is removed.
Hi-lume
1%
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
Lid screws: 8-32 x 3/8 in thread-rolling, serrated
LED
Load
Only
tc = 65 °C ta = 0 – 40 °C
Use 0,75 - 2,5 mm²
(18 - 12 AWG) wire only.
• 100% end-of-line performance tested at factory.
• RoHS compliant.
• Restores all settings after power failure
(EcoSystem mode).
• Redundant connections on line and control terminals
for easy daisy chain wiring.
• For more information please visit:
www.lutron.com/europe
1
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 2 02.16.17
• Power Factor: O> 0.95 at maximum power
• Total Harmonic Distortion (THD): < 20% at
maximum power
• Inrush Current Limiting Circuitry: decreases circuit
br
eaker tripping, switch arcing and relay failure
• Inrush Current: < 2 A
• Device turn-on time: < 100 ms from electronic off and,
< 500 ms from power off
• DALI compliant
– IEC 62386-101 ed. 1.0
– IEC 62386-102 ed. 1.0
– IEC 62386-207 ed. 1.0
• LDE1-96W24V-E driver is programmed by Lutron
manufacturing; NOT configurable by the Lutron
QwikFig configuration system.
Environmental
• Sound rated: Class A inaudible in 24 dBA ambient
• Relative Humidity: maximum 90% non-condensing
• Operating Ambient Temperature: t
a
= 0 °C–40 °C
2
• Indoor use only
• Maximum heat output of module: 46 BTU / hour
Specifications
Regulatory Approvals and Compliance
• Lutron Quality Systems registered to ISO 9001.2012
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI / ESD S20.20
• Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
• CISPR 15 compliant at
220 V~ to 240 V~
• IEC 61347-1 Lamp Control Gear Part 1 General + Safety
Requirements
•
IEC 61347-2-13 Lamp Control Gear Part 2-13 Particular
Requirements for DC or AC supplied Electric Control Gear
for LED modules
• IEC 62384 DC or AC Supplied Electronic Control Gear
for LED Modules - Performance Requirements
• IP20 rated
Performance
• Dimming Range: 100% to 1%
• LED lighting turns on to any dimmed level without
flashing to full brightness
• Operating Voltage: 220 V~ to 240 V~ at 50 / 60 Hz
• Rated lifetime of 50 000 hours at 40 °C (104 °F)
ambient temperature
• For rated warranty, ambient temperature (t
a
) not to
exceed 40 °C (104 °F) (maximum rated temperature)
1, 2
• Thermal foldback protection
• Non-volatile memory restores all driver settings after
power failure (EcoSystem mode)
• Typical standby power consumption: 0.4 W at 230 V~
• Open-circuit protected output
• Short-circuit and overload-protected output
• SELV output designed to withstand hot swap
• Output: 24 V- constant voltage at high-end
• Output: 2 W to 96 W
3
• PWM dimming frequency: meets IEEE1789 at all dim
levels
1
To maintain warranty, installer is responsible for ensuring that the driver ambient temperature does not exceed 40 ºC (104 ºF).
2
Where t
a
is the temperature of the air directly surrounding the driver.
3
At full light output. Product will function at less than 2 W but performance is not specified.
2
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 3 02.16.17
Specifications (continued)
Driver Wiring and Mounting
• Driver must be grounded using the ground lug
•
Terminal blocks on the driver accept solid or stranded
wire per terminal from 0.75 mm
2
to 2.5 mm
2
(18 AWG to 12 AWG)
• Maximum wire length between LED driver and start of
the linear strip for different wire sizes are listed below:
Wire Gauge m (ft)
0.75 mm
2
(18 AWG) 10 (32.8)
1.0 mm
2
(16 AWG) 15 (49.2)
1.5 mm
2
(14 AWG) 20 (65.6)
2.5 mm
2
(12 AWG) 30 (98.4)
4.0 mm
2
* (10 AWG) 50 (164.0)
* To use wire larger than terminal blocks’ rated range of 0.75 mm
2
to
2.5 mm
2
(18 AWG to 12 AWG), connect 30 cm (12 in) or less of rated wire
from terminal, through output strain relief, and connect with larger wire.
Maximium Number of Drivers on a
Miniature Circuit Breaker
Class Maximum Drivers
16 A Class B
Breaker
30
16 A Class C
Breaker
30
3
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 4 02.16.17
Models Available
Model
Input
Voltage
(V~)
Input
Current
1
(A)
Typical
Power
Factor
1
Typical
THD
1
(%)
Output
Power
(W)
Output
Voltage
(V-)
Dimming
(%)
For 24 V-
Constant Voltage
LED Loads
2
LDE1-96W24V-E 220 – 240 0.47 0.97 8.5 2 – 96 24 1.0
1
At maximum output power.
2
For wiring options, see Wiring section, page 8.
NOTE: Specifications are subject to change without notice.
THD vs. Load at 230 V~
0
5
0 10 20 30 40 50 60 70
10
15
20
25
30
35
Output Power (W)
Input Current THD (%)
80 90 100
Efficiency vs. Load at 230 V~
30
40
0 10 20 30 40 50 60 70
50
60
70
80
90
100
Output Power (W)
% Efficiency
80 90 100
Power Factor vs. Load at 230 V~
0.4
0.5
0 10 20 30 40 50 60 70
0.6
0.7
0.8
0.9
1
Output Power (W)
Power Factor
80 90 100
Output Voltage vs. Load at 230 V~
18
20
0
10 20 30 40 50 60 70
22
24
26
28
Output Power (W)
Output Voltage
80 90 100
4
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 5 02.16.17
5001
6452a
lutron.com
B1
0
784276
180337
220 - 240 V 50 / 60 Hz 0,48 A 110 W Max λ = 0,98
Soft-on, Fade-to-Black
EcoSystem Constant Voltage LED Driver
LDE1-96W24V-E
/ FXD196CEU
Technical Support: +44.(0)20.7680.4481
Primary:
Secondary:
Uout = 24 V 4 A Max SELV 96 W
Warranty void if inner plastic cover is removed.
Hi-lume
1%
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
Lid screws: 8-32 x 3/8 in thread-rolling, serrated
LED
Load
Only
tc = 65 °C ta = 0 – 40 °C
Use 0,75 - 2,5 mm²
(18 - 12 AWG) wire only.
Enclosure Dimensions
Measurements are shown as: mm (in)
Knockouts
• Sides
– 4 locations: 13 mm (0.5 in)
• Top
– 2 locations: 13 mm (0.5 in)
267
(10.5)
51
(2.0)
140
(5.5)
Mounting Dimensions
Measurements are shown as: mm (in)
• Maintain a minimum of 75 mm (2.95 in) between
any two Hi-lume 1% drivers
≥ 75 (2.95)
86 (3.375)
5
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 6 02.16.17
Mounting Options
Correct
9
Correct
9
Correct
9
Correct
9
NOTE: Any other mounting configuration will require additional mechanical support. Improper installation may result in hazards
to personnel or property.
NOTE: Driver should be mounted in an accessible location.
6
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 7 02.16.17
Wiring
LDE Models: EcoSystem and DALI Digital Controls
1
For maximum wire length between LED driver and start of the linear strip, see charts in Driver Wiring and Mounting section.
Compatible Controls: Lutron EcoSystem and DALI Digital Controls
Guaranteed performance specifications with the controls listed in the charts below.
For assistance selecting controls, contact our LED Center of Excellence at LEDs@lutron.com
Hi-lume
1% Constant
Voltage
LED Driver
To EcoSystem or DALI
Digital Link
LED
Light
Engine
Neutral (N)
LED+
1
LED–
1
Line / Hot (L)
Earth
E1 / DA1
E2 / DA2
To live
voltage
EcoSystem Controls
Description Part Number Maximum Drivers
per Control
Measured Light
Output Range
PowPak Dimming Module with
EcoSystem
RMK-ECO32-DV-B
RMM-ECO32-DV-B
32 100% – 1%
Energi Savr Node with EcoSystem QSNE-2ECO-D 64 (2 links) 100% – 1%
HomeWorks QS with EcoSystem LQSE-2ECO-D 64 (2 links) 100% – 1%
DALI Controls
Description Part Number Maximum Drivers
per Control
Measured Light
Output Range
Energi Savr Node with DALI QSNE-2DAL-D 64 (2 links) 100% – 1%
GRAFIK Eye QS Wireless with DALI
QSGRK-_D
QSGRM-_D
64 100% – 1%
GRAFIK Eye QS with
DALI (non RF)
QSGR-_D
64 100% – 1%
HomeWorks QS / myRoom Plus
Power Module
LQSE-2DAL-D
LQRK-WPM-_D
64 (2 links)
64
100% – 1%
7
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 8 02.16.17
Wiring (continued)
Continuous LED Light Run
In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult
load manufacturer best practices for any additional consideration in load installation.
When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as
possible for best performance.
Hi-lume
1% Constant
Voltage LED Driver
LED
Light
Engines
LED +
LED –
Hi-lume
1% Constant
Voltage LED Driver
LED +
LED –
LED +
LED –
LED +
LED –
LED
Light
Engine
LED
Light
Engine
LED
Light
Engine
8
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 9 02.16.17
Notes
• The EcoSystem / DALI Digital Link Supply does not
have to be located at the end of the Digital Link.
• EcoSystem / DALI length is limited by the wire gauge
used for E1 / DA1 and E2 / DA2 as follows:
Wire Size DALI Link Length
1
(max)
2.5 mm
2
(12 AWG) 300 m (984 ft)
1.5 mm
2
(14 AWG) 300 m (984 ft)
1.0 mm
2
(16 AWG) 200 m (656 ft)
0.75 mm
2
(18 AWG) 150 m (492 ft)
1
DALI does not recommend wire lengths longer than 300 m (984 ft).
EcoSystem / DALI Wiring Diagrams
EcoSystem / DALI Digital Link Overview
• The EcoSystem / DALI Digital Link wiring (E1 and E2)
connects the digital ballasts and drivers together to
form a lighting control system.
• Sensors are integrated through the Lutron
EcoSystem / DALI controller.
• E1 / DA1 and E2 / DA2 (EcoSystem / DALI digital link
wires) are polarity-insensitive and can be wired in any
topology.
• Power is supplied to the EcoSystem / DALI Digital Link
from the control system.
EcoSystem / DALI Digital Link Wiring
• EcoSystem / DALI Digital Link terminals accept
0.75mm
2
to 2.5mm
2
(18AWG to 12AWG) solid or
stranded copper wire per terminal.
• Make sure that the supply breaker to the drivers and
EcoSystem / DALI Digital Link Supply is OFF when
wiring.
• E1 / DA1 and E2 / DA2 terminals of the drivers can be
daisy chained as shown to the right.
• Using two different colors for E1 / DA1 and E2 / DA2 will
reduce confusion when wiring several drivers together.
• Consult applicable electrical codes for proper wiring
practices.
Wire Size EcoSystem Link Length (max)
2.5 mm
2
(12 AWG) 830 m (2 723 ft)
1.5 mm
2
(14 AWG) 520 m (1 706 ft)
1.0 mm
2
(16 AWG) 310 m (1 017 ft)
0.75 mm
2
(18 AWG) 210 m (689 ft)
9
Hi-lume 1% Constant Voltage Driver (LDE1)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369988d 10 02.16.17
Service
Ballast / Driver Warranty
For warranty information, please visit
www.lutron.com/driverwarranty
Replacement Parts
When ordering Lutron replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Contact Information
For further information, please visit us at
www.lutron.com/europe or contact our LED Control
Center of Excellence at LEDs@lutron.com
)Lutron, Lutron, EcoSystem, GRAFIK Eye, Hi-lume, HomeWorks, PowPak, and Quantum are trademarks of Lutron Electronics Co., Inc.,
registered in the U.S. and other countries.
Energi Savr Node, myRoom, QwikFig, and Soft-on, Fade-to-Black are trademarks of Lutron Electronics Co., Inc.
DALI is a trademark of ZVEI.
10
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369988 ENG (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document