Vive PowPak CCO Module Wireless Lighting Control
369909e 1 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive PowPak CCO Module
The PowPak CCO Module is a low-voltage radio
frequency (RF) control that provides a single dry contact
closure output based on input from Pico remote controls
and Radio Powr Savr occupancy and daylight sensors. It
can be powered by to 24 V~ or 24 V- for easy
connection and integration into building management,
HVAC, VAV, and other 3rd-party systems.
Communication with RF input devices, such as Pico
remote controls and Radio Powr Savr sensors, is
accomplished using Lutron Clear Connect RF
Technology.
These products are also compatible with the Vive hub
which enables a simple setup process using a standard
web browser on any Wi-Fi enabled phone, tablet or
computer. It also enables control and monitoring of all
Vive devices. The Vive hub can be added at any time.
System reprogramming will be required. For a complete
list of features supported with the Vive hub, see
specification submittal 369902.
Note for Replacement: RMJS
/ URMJS - the “S” model
can replace the non-”S” model.
Features
•Singlecontactclosureoutputincludingbothnormally
open (NO) and normally closed (NC) dry contacts
•Maintainedoutputtype
•Operatesat24V~ or 24 V-
•Receiveswirelessinputsfromupto10Picoremote
controls,10RadioPowrSavr occupancy / vacancy
sensors,and1RadioPowrSavrdaylightsensor
•UtilizesLutronClearConnectRFTechnology–referto
model number chart below for frequency band data
•Screwtabsprovidedforsurfacemounting
(recommended); or mounts to a U.S. style junction box
throughastandardsizeknockout
RMJS-CCO1-24-Bmodelshown
1
Vive PowPak CCO Module Wireless Lighting Control
369909e 2 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Models
Model Number Region Operating Voltage Frequency Band
RMJS-CCO1-24-B U.S.A., Canada, Mexico 24 V~ or 24 V-
431.0437.0MHz
URMJS-CCO1-24B U.S.A. (BAACompliant) 24 V~ or 24 V- 431.0437.0MHz
NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.
2
Vive PowPak CCO Module Wireless Lighting Control
369909e 3 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Environment
•Ambientoperatingtemperature:32°Fto131°F
(0°Cto55°C)
•0%to90humidity,non-condensing
•Forindooruseonly
•AlldriversandballastsusedwithVivewireless
controls must comply with the limits for a Class A
devicepursuanttoPart15oftheFCCRules
Contact Closure Output
•Acceptsinputvoltagesof0–24V~/0–24V-; see
chart below for load switching capacities
•Providesbothnormallyopen(NO)andnormally
closed (NC) dry contacts
•Maintainedoutputtype
•CCOterminalsaccept20AWGto16AWG
(0.5mm
2
to1.5mm
2
) solid or stranded wire
•Outputislatching
•TheCCOisnotratedtocontrolunclamped,inductive
loads. Inductive loads include, but are not limited
to, relays, solenoids, and motors. To control these
types of equipment, a flyback diode must be used
(DC voltages only). See diagram below. For more
information, please see Application Note #434 (p/n
048434).
Specifications
Regulatory Approvals
RMJS- / URMJS- models
•UL® Listed (U.S.A.)
•FCCapproved.ComplieswiththelimitsforaClass
Bdevice,pursuanttoPart15oftheFCCrules.
(U.S.A.)
• Complieswithrequirementsforuseinotherspaces
used for environmental air (plenums) per
NEC
®2014300.22(C)(3)
• ListedinaccordancetoCAN/ULCS102.2-2010
with a Flame Spread Rating of 0 and a Smoke
Developed Classification of 40, with a minimum
spacingof6ft(1.83m)offcenter
•CSAandIC(Canada)(RMJS-only)
•COFETEL(Mexico)(RMJS-only)
Power
•IECPELV/NEC® Class 2
•Operatingvoltage:24V~ / 24 V-
•Operatingcurrent,nominal:45mA(24V~)
35mA(24V-)
•StandbyPowerConsumption(allmodels):<1.0W
System Communication
•OperatesusingClearConnectRFTechnologyfor
reliable wireless communication; refer to model
numberchartonpage1forfrequencybanddetails
•RFrangeis30ft(9m)forRMJS-andURMJS-
models
•Wirelesssensorsandcontrolsmustbelocated
within60ft(18m)lineofsight,or30ft(9m),
through walls, of the associated control module.
The60ft(18m)rangeisnotreducedbyaceilingtile
obstruction.
•ContactLutronrstforapplicationsusing
foil-backed or metallic ceiling tiles.
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
3
Vive PowPak CCO Module Wireless Lighting Control
369909e 4 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Dimensions
Dimensionsareshownas:in(mm)
Range Diagrams
RMJS- and URMJS- models
•ContactLutronrstforapplicationsusingfoil-backedormetallicceilingtiles.
Test
30 ft (9 m)
Maximum
40 ft (12 m)
30 ft (9 m)
PowPak CCO
Module
Install in center of room to
maximizeRFcoverage.
Pico
Remote
Control
Radio Powr Savr
Occupancy Sensor
1/2inor21mmtradesize
knockout opening
3.94
(100)
3.42
(87)
2.82
(72)
1.25
(32)
NOTE:Wirelesssensorsandcontrolsmustbelocatedwithin60ft(18m)lineofsight,or30ft(9m),throughwalls,ofthe
associated control module. The60ft(18m)rangeisnotreducedbyaceilingtileobstruction.
4
Vive PowPak CCO Module Wireless Lighting Control
369909e 5 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Default Operation
Transmitting Device Transmitted Command CCO Default Action
Pico
Remote Control
On NO = Close, NC = Open
Off NO = Open, NC = Close
Raise NO = Close, NC = Open
Lower No Action
Preset NO = Close, NC = Open
Radio Powr Savr
Occupancy Sensor
Occupied NO = Close, NC = Open
Unoccupied NO = Open, NC = Close
Radio Powr Savr
Vacancy Sensor
Occupied No Action
Unoccupied NO = Open, NC = Close
Radio Powr Savr
Daylight Sensor
AmbientLightBelow
Target Level
NO = Close, NC = Open
Ambient Light Above
Target Level
NO = Open, NC = Close
System Diagram
RadioPowrSavrOccupancySensor(upto10)
RadioPowrSavrDaylightSensor(upto1)
PicoRemoteControl(upto10)
To 3rd-Party
Equipment
To power source
5
Vive PowPak CCO Module Wireless Lighting Control
369909e 6 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wiring Diagram (Recommended)
NOTE: When wiring CCO output, use
20AWGto16AWG(0.5mm
2
to1.5mm
2
)
solid or stranded wire.
To CCO controlled device.
NO
(Normally Open)
NC
(Normally Closed)
COM
(Common)
Supply Voltage
24 V~ /24 V-
NOTE: CCO Module supply wires can be
connected in any polarity.
Mounting screw
(2 Supplied)
Wire Nut
(2 Supplied)
NOTE: The CCO output may be wired using either the NO or NC terminal.
Refer to the Default Operation chart on page 6 for more information
regarding the behavior of the CCO output terminals.
NOTE: RMJS- and URMJS- models are supplied with three twist-on
wire connectors.
6
Vive PowPak CCO Module Wireless Lighting Control
369909e 7 08.15.17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wiring Diagram (Junction Box Optional)
*
NOTE: Some applications (in U.S.A.) require the
PowPak module to be installed inside an additional
junction box. For information about how to perform
this installation, please visit www.lutron.com,
Application Note #423 (P/N 048423). Please consult
all local and national electric codes for proper
installation methods.
Supply Voltage
24 V~ / 24 V-
JunctionBox
*
To 3rd-Party
Equipment
NC
NO
COM
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
)Lutron, Lutron, PowPak, Pico, and Clear Connect are trademarks of Lutron Electronics Co., Inc. registered in the U.S. and other countries.
Vive and Radio Powr Savr are trademarks of Lutron Electronics Co., Inc.
7