SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 1 10.22.15
Pico® Wireless Remote with Nightlight
(for North, Central, and South America)
The Pico® wireless remote with nightlight is a flexible and
easy to use device that allows the user to control Lutron
®
wireless load-control devices from anywhere in the space.
This battery-operated control requires no external power
or communication wiring.
Features
Provides control for the following:
Caseta
® Wireless dimmers
Energi Savr Node
TM and Quantum® systems, through
the use of a QS sensor module (QSM)
Vive
TM systems, including:
· Maestro Wireless
® controls
· PowPak
® modules
GRAFIK Eye
® QS wireless systems
HomeWorks
® QS wireless systems
Maestro Wireless
® controls
PowPak
® Modules
RadioRA
® 2 systems
Easy reconfiguration for use as:
Handheld remote
Wall mount control (with or without faceplate; faceplate
adapter kit sold separately)
Car visor control (car visor clip sold separately)
A table top control (table top pedestal sold separately).
Battery-powered. Requires no wiring.
3 year battery life (one CR2032 battery included).
Can provide control of lighting devices within a
30 ft (9 m) range.
3 Button Pico
® wireless
remote with nightlight
and Raise/Lower
2 Button Pico® wireless
remote with nightlight
1
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 2 10.22.15
Specifications
Regulatory Approvals
• Lutron
® Quality Systems registered to ISO 9001:2008.
FCC Certified (U.S.A.)
IC Certified (Canada)
COFETEL Certified (Mexico)
SUTEL Certified (Costa Rica)
Power
Operating Voltage 3 V-
(1) CR2032 Battery (included)
System Communication and Capacity
Communicate using Radio Frequency (RF) at 431 to
437 MHz.
Thousands of system addresses prevent interference
between systems.
Can be assigned to control lighting devices that are
within a 30 ft (9 m) range.
Can be configured as a scene or zone control in
GRAFIK Eye
® QS wireless applications.
Mounting Considerations
Mounting of any RF devices on or in close proximity
to a metal surface will drastically reduce the effective
range of radio signal transmission or reception.
All RF devices must be mounted on non-conductive
materials to ensure proper performance.
Environment
Ambient operating temperature:
32 ˚F to 140 ˚F (0 ˚C to 60 ˚C)
Maximum 90% non-condensing relative humidity
Indoor use only
Warranty
1 Year Limited Warranty
For additional Warranty information, please visit
http://www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
2
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 3 10.22.15
Model Number
For order quantities of 96 pieces or greater of the same model number, bulk packaging may be available.
Mounting hardware is not included with bulk packaging. Please contact Lutron
® Customer Service for
availability at 1.888.LUTRON1 (1.888.588.7661).
Color Codes:
Gloss Color Code
White WH
Black BL
Ivory IV
Light Almond LA
White / Gray WG (Top and Raise buttons are White; Preset, Lower, and Bottom buttons are Gray)
Frequency/Channel Codes:
Code
J — 431.0 - 437.0 MHz
Button Configuration Codes:
Button Configuration Code
2 Button 2B
3 Button with Raise/Lower 3BRL
2 Button
(2B)
3 Button with
Raise/Lower
(3BRL)
PJN-XXXX-GXX-L01
Color Code
Button Configuration Code
Frequency/Channel Code
3
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 4 10.22.15
Operation
Raise Button (3BRL models only)
Lights increase in intensity.
Bottom Button
Lights dim to off.
Activates “OFF” scene when used in scene
mode with GRAFIKEye
® QS
wireless applications.
Preset Button
(3BRL models only)
Tap once:
Devices go to preset
levels / positions. Activates
scene 16 when used
in scene mode with
GRAFIKEyeR QS wireless
applications.
Press and hold:
To save new preset level
or position, press and
hold for 6 seconds.
Top Button
Lights brighten to full intensity. Activates
scene 1 when used in scene mode with
GRAFIKEye
® QS wireless applications.
Lower Button
(3BRL models only)
Lights decrease in intensity.
Dimensions
Measurements shown as: in (mm)
0.31
(8)
2.6
(66)
1.30
(33)
Nightlight
Glows a soft green color.
Indicator LED
Flashes to indicate a
button press or when unit
is in programming mode.
4
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 5 10.22.15
Dimensions
Measurements shown as: in (mm)
Single Pedestal
Pedestals sold separately.
1.77
(45)
1.46
(37)
2.96
(75)
4.59
(117)
Triple Pedestal
Pedestals sold separately
.
Nightlight Pico® Pedestal Model Number
Pedestals sold separately. Available in gloss finish only.
L-PEDX-XX
Color Code
Capacity Code
3.19
(81)
Double Pedestal
Pedestals sold separately.
Quadruple Pedestal
Pedestals sold separately.
6.00
(152)
Color Codes:
Gloss Color Code
White WH
Black BL
Capacity Codes:
Capacity Code
Single 1
Double 2
Triple 3
Quadruple 4
5
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 6 10.22.15
Mounting Options
Continued on next page...
Stand Alone Mounting
Adhesive-Mount
(included with Pico
® Wireless Remote with nightlight)
2
1
2
1
1
2
3
4
Wallplate Adapter
Model PICO-WBX-ADAPT
(sold separately)
*Wallplate adapter / wallplate sold separately
Note: Kit includes special
screws to be used for more
permanent mounting and / or
for non-smooth surfaces.
Screw-Mount (sold separately)
Model PICO-SM-KIT
6
SPECIFICATION SUBMITTAL Page:
Job Name:
Job Number:
Model Numbers:
PicoR Wireless Remote and Mounting Accessories Control Specification
369760d 7 10.22.15
Mounting Options (continued)
Car Visor
Model PICO-CARVISOR-CL (sold separately)
1
2
3
UP
2
1
UP
Mounting to Metal Surfaces
Coming Soon (sold separately)
7