®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive VIVE-V-1-5 Wireless Hub
3691056a 1 04.25.17
Vive Hub
Vive Hub Dashboard
Vive-V-1-5
The Vive hub provides a connection point for Lutron
Vive devices such as PowPak wireless dimming and
switching modules, PowPak wireless fixture controllers,
PowPak 20 A relay modules, Maestro Wireless
dimmers and switches, Pico remote controls, Radio
Powr Savr occupancy sensors, and daylight sensors.
Older hubs can be upgraded to 1.5. Some features
may not be available with older devices (see below for
details).
New Features
•DaylightingSetpointTweaking–Ifthelightsaretoo
bright or too dim while using daylighting, adjust the
settings in real time from a smart device to alter the
setpoint for the light level that is maintained between
natural and electric light. Older devices (released prior
to 1.5) can be adjusted but may take a minute to reach
desired level because of a of slow fade. New devices
will respond immediately.
•TimeclockOccupancySensorSettingsChanges
–Requires1.5devices.Olddeviceswillbe
displayedas"unsupported"inthesoftwareUI.
Allows timeclock events to change the behavior
of occupancy settings based on time of day. For
example, change the unoccupied level of corridors/
hallways from 25% during the day, and off at night.
The following settings can be changed:
–OccupiedLevel–Thelevelthelightsgotowhen
occupied.Changesarenotappliedimmediately
to currently occupied spaces, but will change the
next time the space goes occupied to minimize
distraction.
–UnoccupiedLevel–Thelevelthelightsgotowhen
unoccupied.Changesareappliedimmediatelyto
spaces not currently occupied.
–Enable/DisableOccupancy–Changewhether
devices will respond to the occupancy sensor.
–Timeoutofthesensors(requiresFC-VSENSOR,
DFCSJ-OEM-OCC).LRF2sensorsstillrequirethis
setting to be set locally.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive VIVE-V-1-5 Wireless Hub
3691056a 2 04.25.17
New Features (continued)
•iOSandAndroidApps–Helperappsactasan
intermediary between Vive systems and the Lutron
Cloudwithouttheneedofapermanentinternet
connection.ConnectstoHubswhenonsite.When
asmartdevicereconnectstotheInternet,itpasses
needed information back and forth.
–Registrationofjobs/usersforextendedwarranty.
–Managemultiplejobswithcontactsandjobinfo.
–Invitefacilityuserstohaveaccesstohubs/job.
–Automaticallysendhandoffdocumentation
personalized to your firm to facility management
team.Includingprogramminguserguide,online
"How-to"videos,andsupportnumber.
–Connectiontohubbrowseruserinterfacefor
Setup. Normal web browser still works and the app
isnotrequired.
–Connectiontohubbrowserdashboardforcontrol
and monitor. Normal web browser still works and
theappisnotrequired.
•Foralistofexistingfeaturesanddevices,referto
P/N 369902 on www.lutron.com
Devices Supported
This version of hub software is needed to support
the following devices. Visit www.lutron.com/Vive for
the device spec submittals.
•MRF2S-6ND-120MaestroWirelessDimmer,
600W/600VAIncandescent/MagneticLow-
Voltage,SpecGrade,NeutralWire.Cancontrol
PowerModules(PHPM-PA-DV,PHPM-3F-DV-WH,
PHPM-WBX-DV-WH,andGRX-TVI)
–Foralistofexistingfeaturesanddevices,referto
P/N 369904 on www.lutron.com
•ReceptacleControl–Simpleretrotreceptacleto
replace an existing outlet with the control/antennae
builtintotheoutlet.Controlsbothoutletsinthe
Duplexmodels,orhalfoftheoutletinthesplitversion.
Available for 15 A or 20 A.
–Split
· CAR2S-15-STR-xx: where xx is the color.
· CAR2S-20-STR-xx
–Duplex
· CAR2S-15-DTR-xx
· CAR2S-20-DTR-xx
–Foralistofexistingfeaturesanddevices,referto
P/N 3691034 on www.lutron.com
•TheViveIntegratedFixtureControlisanin-xture
radiofrequency(RF)devicethatcontrolseitherthe
LutronEcoSystemorDALIRdrivers.ItworkswithPico
remote controls, Radio Powr Savr wireless sensors, or
Vivehubs.Itisintendedtobemountedtoaxtureby
a fixture manufacturer.
–DFCSJ-OEM-RF=RFOnlywithoutsensor
–DFCSJ-OEM-OCC=Sensorversion
–DFC-OEM-DBI=FixtureControlDigitalBus
InterfaceforLutronDrivers
· For a list of existing features and devices, refer to
P/N 3691039 on www.lutron.com
)Lutron,Lutron,EcoSystem,MaestroWireless,Pico,andPowPakaretrademarksofLutronElectronicsCo.,Inc.,registeredintheU.S.andothercountries.
 RadioPowrSavrandVivearetrademarksofLutronElectronicsCo.,Inc.
iOSisatrademarkofCiscointheU.S.andothercountriesandisusedunderlicense.
 AndroidandChromeareregisteredtrademarksofGoogleInc.
 DALIisatrademarkofZVEI.
2