Fillable Rv-88a Order Form

Fill Online, Printable, Fillable, Blank Rv-88a Order Form Form

Use Fill to complete blank online VAN'S AIRCRAFT pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Rv-88a Order Form

On average this form takes 15 minutes to complete

The Rv-88a Order Form form is 2 pages long and contains:

  • 0 signatures
  • 21 check-boxes
  • 49 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Van's Aircraft forms online.

BROWSE VAN'S AIRCRAFT FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
RV-8/8A STANDARD KIT ORDER FORM
Customer Number (assigned w/ Emp kit)
Name
Mailing address
Shipping address (if different)
Day phone
e-mail
Fax
Eve phone
PLEASE READ AND SIGN BELOW
1. Kit prices are prices in effect the day order is received.
2. A 25% deposit must accompany kit orders.
3. Customer-instigated delays may result in price increas-
es.
4. Kits must be paid in full before they can be shipped.
5. $500.00 non-refundable if order is cancelled.
6. Payment in U.S. funds: check, money order, or Visa/
Mastercard/Discover.
7. Kit/plans orders must be in writing (mail, email or FAX).
8. Prices are ex-works Aurora, Oregon.
9. Freight charges are prepaid or collect, depending on
carrier.
10. Van’s Aircraft, Inc. cannot assist in certifying kits out-
side the USA.
11. Sign & return Van’s Aircraft standard Waiver and Re-
lease of Liability Agreement.
12. Prices are subject to change without notice.
Signature:__________________________________
PREVIEW PLANS SET (required purchase before beginning construction)
$55.00
EMPENNAGE KIT $2,000.00
Empennage Options (enter total from reverse side of form) (if using fillable form leave blank)
WING KIT (if ordering complete QuickBuild Kit, use QuickBuild Order Form) $8,025.00
Wing Options (enter total from reverse side of form) (if using fillable form leave blank)
FUSELAGE KIT (select and enter one) RV-8 $9,050.00 (or) RV-8A $8,350.00
Fuselage Options (from reverse side of form) (if using fillable form leave blank)
FINISHING KIT If you are NOT taking advantage of Van’s special OEM pricing on new Lycoming engines, and are obtaining an engine from another source,
you must use the Special Finishing Kit order form. Use Standard Kit Form to order a Finishing Kit ONLY if you are purchasing a new engine from Van’s.
(select and enter one) RV-8 $6,425.00 (or) RV-8A $7,550.00
Spinner type required (select one) Hartzell constant-speed Sensenich fixed-pitch Wood fixed-pitch None ($120.00 credit)
Engine type (select one) O-320-D1A/D2G IO-320-D1A O-360-A1A IO-360-M1B IO-360-A1B6
Do not submit Credit Card information via email! If you plan to email your order form to Van’s and pay with a credit card, please omit any
credit card information from the form and either call us with your CC# or use Van’s Webstore to make a secure online payment.
7-1-19
TOTAL CRATING CHARGE (if using fillable form leave blank)
TOTAL ORDER (if using fillable form leave blank)
METHOD OF PAYMENT (if credit card, enter number/exp. date) CC: EXP.
AMOUNT ENCLOSED (25% minimum deposit required)
Authorization to use Credit Card for Final Payment Yes No (select one)
Customer Number of Previously Completed/Flown RV: ___________________
E-Mail to: kits@vansaircraft.com
OPTIONS
Some optional kits are best installed during construction are shown here. See Van’s Accessories Catalog for more choices. Enter the amount for the
option in the box on the right. Add the total for each airframe kit and enter the amount on the front of the form.
Circle the crating charges that apply, total, and enter the amount on the front of the form.
Name:_____________________________ Date:_____________ Customer Number: ______________
EMPENNAGE KIT
ELECTRIC ELEVATOR TRIM: Standard manual elevator trim is controlled with a vernier cable supplied with the Fuselage kit.
Electric option uses the same trim tab but a servo motor installed in the elevator replaces the manual push-pull cable. Kit in-
cludes servo motor, formed metal parts, hardware and instructions. Weight comparable to standard manual installation. The
$325.00
TOTAL: ENTER ON FRONT OF FORM. (if using fillable form leave blank)
WING KIT
FLOAT FUEL SENDING UNITS Arm with float senses fuel level. Works with Van’s gauges and many other resistance gaug-
es. Fits standard cover plates in wing kit. Two supplied -- one for each wing.
$70.00
QUICKBUILD WING: A huge time saver. The wing panel is about 80% completed at the factory. All parts primed before as-
sembly. Fuel tanks finished, ailerons, flaps ready to install. Builder must rivet one wing skin, install wingtip, controls, fairings.
Lights, fuel senders not included. NOTE that cost is in addition to Standard Wing Kit price.
$5,910.00
TOTAL: ENTER ON FRONT OF FORM (if using fillable form leave blank)
FUSELAGE KIT
REAR SEAT RUDDER PEDALS Small round pedal extensions to allow the back seater to control the rudder.
No brake provision. Specify for RV-8 or RV-8A.
RV-8 $145.00
RV-8A $255.00
TALL PILOT OPTION Provides more legroom in front seat, less in the rear seat. For really tall people; 6’6” or more. $10.00
RUDDER PEDALS Choose between cockpit-adjustable sliding rudder pedals (can be adjusted while the pilot is seated in the cockpit) or ground-
adjustable rudder pedals (adjustment requires hand tools and cannot be done while seated in the cockpit. Ground adjustable pedals are somewhat
lighter and easier to install. Select your choice below.
COCKPIT-ADJUSTABLE SLIDING RUDDER PEDALS: Pedals adjusted easily in flight via a sliding rail system.
$550.00
GROUND-ADJUSTABLE REPOSITIONABLE RUDDER PEDALS: Pedals set during construction.
$325.00
STATIC AIR KIT: Includes static ports and lines to the instrument panel.
$19.00
MANUAL AILERON TRIM: Simple, light and effective spring bias system trims the roll axis. Inexpensive, too.
$60.00
ELECTRIC AILERON TRIM: Includes servo motor, panel mount rocker switch and all hardware. May also be wired to “china
hat” switch sold separately.
$320.00
QUICKBUILD FUSELAGE: Fuselage 75% assembled at factory. All parts primed before assembly. Builder must complete
interior of cabin, instrument panel and forward deck. If Wing Kit is not ordered, some additional components must be purchased
with the QB Fuselage. NOTE that cost is in addition to Standard Fuselage Kit price.
$5,900.00
MANUAL ELEVATOR TRIM CABLE: Mandatory if you’ve chosen manual trim in the empennage kit.
$165.00
TOTAL: ENTER ON FRONT OF FORM. (if using fillable form leave blank)
CRATING CHARGES (these are NOT shipping charges)
Empennage Wing QuickBuild
Wing
Fuselage QuickBuild
Fuse
Finishing
STANDARD $30.00 $90.00 $310.00 $90.00 $310.00 $90.00
TOTAL CRATING CHARGES: ENTER ON FRONT OF FORM (if using fillable form leave blank)
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Rv-88a Order Form

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 2 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document