Fillable Lutron electronics GRAFIK Eye QS Control Unit with EcoSystem spec

Fill Online, Printable, Fillable, Blank Lutron electronics GRAFIK Eye QS Control Unit with EcoSystem spec Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics GRAFIK Eye QS Control Unit with EcoSystem spec

On average this form takes 35 minutes to complete

The Lutron electronics GRAFIK Eye QS Control Unit with EcoSystem spec form is 32 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 140 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Preset Dimming Controls
369310g 1 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
GRAFIK Eye QS Control Unit with EcoSystem
LUTRON
1
2
3
4
Off
Preset
Close
Open
Description
GRAFIK Eye QS with EcoSystem is the premier energy-
saving lighting and shade control. The GRAFIK Eye QS
control unit features an astronomic timeclock and intuitive
lighting presets, which are seamlessly integrated with
EcoSystem fluorescent ballasts and LED drivers, and
Lutron’s QS components and systems. Additionally, the
GRAFIK Eye QS with EcoSystem control unit is compatible
with all Lutron wired QS products and systems,
including Quantum.
Application Suggestions and Differences between GRAFIK Eye QS with EcoSystem Control Unit
and Energi Savr Node with EcoSystem Unit
GRAFIK EyeQS with EcoSystem
LUTRON
Energi Savr Node (ESN)
with EcoSystem
Suggested/Recommended Applications Single rooms, partitioned spaces,
e.g., conference room, classroom,
ballroom, lobby
Open spaces, multiple
enclosed rooms, e.g., open
office, window offices
Programming Method Info Screen on the QS control unit Via Energi Savr Node App for
iPod mobile digital device
Integral Timeclock Yes Yes (using a QS Timeclock or
contact closure interface)
Compatible with seeTouch QS Keypads Yes Yes
Compatible with EcoSystem Wall Controls No Yes
Compatible with EcoSystem IR Sensors No Yes
Includes dry contact closure for integration to BMS
or Security Systems
Yes Yes
Input Voltage 120-127 or 220-240 V~ 50/60 Hz 120/240/277 V~ 50/60 Hz
Number of EcoSystem Busses 1 1 or 2
Number of Zones 6, 8, or 16 Programmable (maximum 100)
Number of Line-Voltage Outputs 3 (Zones 1-3 only) --
Compatible with other QS Devices Yes Yes
1
Preset Dimming Controls
369310g 2 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Mechanical Dimensions
4$ in
(119 mm)
94 in
(239 mm)
4 in
(10 mm)
2 in
(51 mm)
Front View Side View
Fits into a 4-gang U.S. backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or
3 in (76.2 mm) deep (Lutron P/N 241-400)
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Example of Wired System
QSE-CI-NWK-E
Sivoia QS
shade
seeTouch QS
seeTouch
QS
Wired
occupancy
sensor
GRAFIK Eye QS
wireless
GRAFIK Eye QS
wireless
Wired QS link
Quantum
(optional)
QS Sensor
Module
Energi Savr
Node
EcoSystem
ballast
System Topology
2
Preset Dimming Controls
369310g 3 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Features
• Pushbutton recall of four preset lighting scenes,
plus Off.
• Sixteen (16) total available scenes, plus Off scene.
• Zones 1, 2, and 3 can control many light source
types directly or through power modules.
• Optional integrated shade control buttons, which
can also be added to the unit after installation.
• Master override buttons to raise and lower all lights.
• Allows setup of lighting scenes and shade presets
using buttons on the control unit.
• Built-in infrared (IR) receiver.
• External IR connection.
• Built-in astronomic timeclock.
• Info screen shows zone light level percentage,
energy savings, zone labeling, programming, and
EcoSystem setup.
• Lockout option prevents accidental changes.
• Occupancy sensor input and 24 V- power for one
occupancy sensor.
• QS communication link for seamless integration of
lights, motorized window treatments, occupancy
sensors, wallstations, and integration interfaces.
• Compatible with all Lutron QS system components.
• Control up to 6, 8, or 16 EcoSystem zones from
internal bus supply.
• Zones 1, 2, and 3 are integral line voltage dimming
zones and can be optionally programmed as
EcoSystem zones.
• Up to 64 EcoSystem or Hi-lume 3D ballasts can be
addressed and grouped to zones.
• Integral EcoSystem setup and programming through
the info screen.
• Backlit buttons with engraving make unit easy to
locate and operate.
• Available in a variety of colors and finishes.
LUTRON
OK
1 2 3 4 5 6
Optional
shade
control
keypad
Zone
control
Infrared
receiver
USB
type
mini B
Info
screen
Lighting
control
keypad
1
2
3
4
Off
Off
Preset
Close
1
2
3
4
Open
Preset
Close
Open
Note: General Engraving (-EGN) shown.
3
Preset Dimming Controls
369310g 4 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Zones 1, 2, and 3 can also control the following lighting
sources with a smooth, continuous square law dimming
curve or on a full conduction non-dim basis through
separate Lutron power modules:
• Electronic low-voltage transformers (use ELV or
Phase-Adaptive power module: PHPM-PA-DV-WH/
PHPM-PA-120-WH)
• Lutron 3-wire controlled electronic fluorescent dimming
ballasts (use fluorescent 3-wire power module:
PHPM-3F-DV-WH/PHPM-3F-120-WH)
• Lutron 3-wire controlled LED drivers (use flourescent 3-wire
power module: PHPM-3F-DV-WH/PHPM-3F-120-WH)
• Non-dim (use switching module: PHPM-SW-DV-WH)
• 0–10 V (use TVI)
Note: A zone may be programmed to control only one load
type at a time.
Key Design Features
• Lightning strike protection meets ANSI/IEEE standard
62.41-1980. Can withstand voltage surges of up to
6000 V~ and current surges of up to 3000 A.
• Tested to withstand 16 kV electrostatic discharge without
damage or memory loss.
• RTISS-equipped: Compensates in real time for incoming line
voltage variations (no visible flicker with +/-2% change in
RMS voltage per cycle, and +/-2% Hz change in frequency
per second).
• Power failure memory retains programming and light level
settings for up to 10 years in the event of a power loss.
• The GRAFIK Eye QS supplies 3 Power Draw Units (PDUs)
on the QS link.For complete information, see the Power
Draw Units on the QS Link Spec (369405) on
www.lutron.com
• Faceplate is hinged at the top and bottom, and stays open
at 180° for ease of access.
• Direct control of 120 V~ and 277 V~ EcoSystem,
Hi-lume 3D, and Hi-lume LED ballasts
(no interface required).
Input Power
• 120 – 127 V~ 50/60 Hz
• 220 – 240 V~ 50/60 Hz
Listings (120 – 127 V~)
• UL
• CSA
• NOM
• CEC (Title 24)
Environment
• 32 to 104 °F (0 to 40 °C).
• Relative humidity less than 90% non-condensing.
Lighting Sources/Load Types
All Zones
• EcoSystem and Hi-lume 3D ballasts, and Hi-lume LED
drivers directly wired to integral EcoSystem digital link
• Before system is addressed, Zone 4 will transmit
broadcast commands to all EcoSystem loads wired to
the GRAFIK Eye QS.
• Zones on Energi Savr Node products wired to the
same QS link
– Zones on Energi Savr Node with Softswitch
– Zones on Energi Savr Node for 0-10 V
– Zones on Energi Savr Node with EcoSystem
Please refer to “Remote Zone Mapping” for
important information.
• DMX channel(s) through DMX output interface
(QSE-CI-DMX). Please refer to “Accessory Controls: DMX
Output Interface”
Zones 1, 2, and 3 can also control the following lighting
sources with a smooth, continuous square law dimming
curve or on a full conduction non-dim basis:
• Incandescent
• Halogen
• Magnetic low-voltage transformer
• Lutron Tu-Wire electronic fluorescent dimming ballast
• Lutron Hi-lume 2-wire LTE LED driver
• Advance Mark XR electronic dimming ballast
• Neon and cold cathode
• Non-dim (incandescent, magnetic low-voltage, Tu-Wire,
or neon/cold cathode)
• Cree LR4/6, 120 V~ fixtures (for loading capacities,
please refer to the LED report card located at
www.lutron.com/LEDtool)
Please refer to “Capacities” for more information.
Specifications
4
Preset Dimming Controls
369310g 5 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Info Screen
• OLED (organic LED) screen is viewable from all angles.
• Screen turns off when idle for 30 seconds.
• Programmable zone labels.
• Programmable scene labels.
• Status of real-time zone percentage and energy savings.
• Programmable timeclock schedules.
• Programmable shade labels.
• Selectable display languages:
– English – Spanish – French
– Italian – German – Portuguese
Astronomic Timeclock
• Integral to all units.
• 7 daily schedules available.
• One available holiday schedule is programmable by date up
to one year in advance.
• 25 events per day maximum.
• Timeclock events are programmable to control scenes that
affect any Energi Savr Node QS unit connected on the QS
link without changing the local scene on the GRAFIK Eye
QS control unit.
• Astronomic times are programmable by integral city
database or by entering latitude and longitude. Sunrise/
Sunset times automatically adjust throughout the year
based on location.
• Automatically adjusts for Daylight Saving Time (DST);
DST is programmable.
• Local timeclock events can activate any of the
following features:
– Scenes 1 to 16 and Off
– Any available shade presets
– Start and End afterhours mode
– Enable and Disable daylighting for all zones/groups
– Enable and Disable occupancy for
occupancy/vacancy sensors
– Enable and Disable occupied events for all
occupancy sensors
System Communications and Capacities
• Low-voltage type IEC PELV/NECR Class 2 wiring connects
control units, wallstations, motorized shades, and
control interfaces.
• A QS system can have up to 100 devices and 100 zones.
• Class 1/Class 2 wiring connects ballast to control unit.
Scene and Shade Buttons
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and to operate the control unit in low light conditions
(backlight can be disabled).
• Optional button engraving is angled up to the eye for
easy reading.
• Predefined label stickers are included for field labeling.
• 4 preset lighting scenes, plus Off, are accessible from the
front of the control unit.
• 12 additional scenes are stored in the control unit and
are accessible from the integral timeclock, seeTouch QS
wallstations, and QS interfaces.
• Light levels fade smoothly between scenes. Fade time
can be set differently for each scene: 0 to 59 seconds, or
1 to 60 minutes. Maximum fade time from Scene Off
is 3 seconds.
Shade Control
• The GRAFIK Eye QS control unit can include up to 3
shade button columns. Each column has backlit open,
preset, close, and raise/lower buttons.
• Each shade button column can be programmed to
operate one shade or a group of shades. (Shades may
be assigned to more than one shade button column).
• Faceplates are available with 1, 2 and 3 shade
button columns.
Zone Control
• Each zone has a dedicated raise and lower button to
adjust the zone.
• Each zone has a dedicated 7 LED bar graph for level
status. Percentage of light level and energy saved is
displayed on the info screen.
• All zone information has blue backlit LEDs. Backlight
turns off when idle for 30 seconds.
• High-end and low-end trim settings are adjustable per
zone (high end from 99 to 55%; low end from 45 to 1%).
Note: Trim for remote zones must be adjusted locally on
the Energi Savr Node unit.
• Each zone is programmable to only one load type
at a time.
Specifications
5
Preset Dimming Controls
369310g 6 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Specifications
Infrared
• Infrared (IR) receiver allows infrared transmitters to select
8 scenes, raise/lower lighting zones,
or raise/lower shades.
• Transmitter buttons imitate buttons on faceplate.
• 50 ft (15 m) line of sight range.
• Terminal block infrared input for connection to a wired
IR input from third-party equipment.
• IR can be disabled via programming.
• Works with Lutron GRX-IT and GRX-8IT infrared
remote controls.
Accessory Controls: seeTouch QS Wallstations
(QSWS2)
• Wired seeTouch QS keypads provide the
following features:
– Access to one or more of the 16 scenes on the
GRAFIK Eye QS control unit
– Zone toggle, partitioning, sequencing, fine tune, panic
mode, and timeclock enable/disable
– Contact closure inputs
– Various other functions that are available on specific
wallstation configurations. Refer to the seeTouch
specification submittal.
Accessory Controls: QS Sensor Module (QSM2)
• The QS Sensor Module provides a means to link wired
or wireless occupancy sensors or daylight sensors, Pico
controls, and wired infrared sensors to a GRAFIK Eye QS
control unit via the wired QS link.
– Occupancy sensors wired (or wirelessly linked) to
a QS Sensor Module can be used by one or more
GRAFIK Eye QS control units on the wired link.
– Daylight sensors wired (or wirelessly linked) to a
QS Sensor Module can be used by one or more
GRAFIK Eye QS control units on the wired link.
– Infrared sensors can control either one or more zones or
scenes on the GRAFIK Eye QS control unit. Functionality
varies; refer to the documentation for the QS Sensor
Module for details.
– Pico wireless controls can control either one or more
zones or scenes on the GRAFIK Eye QS control unit.
– Pico wired controls can be used, when connected to
a QS Sensor Module, to control one or more zones or
scenes on the GRAFIK Eye QS control unit.
Accessory Controls: Contact Closure Input/Output
Interface (QSE-IO)
• Recalls preset light levels for the following set of scenes
on the GRAFIK Eye QS control unit:
Scenes 1-4 and Off Scenes 9-12 and Off
Scenes 5-8 and Off Scenes 13-16 and Off
• Sequence scenes 5-16, Enable/Disable Zone Lockout,
Enable/Disable Scene Lockout, Enable/Disable Panic
Mode, Enable/Disable Timeclock.
• Occupancy Sensors. An individual input counts as 1
occupancy sensor for the GRAFIK Eye QS control unit.
Each input can be assigned to either Scene Control or
Zone Control (please refer to the Occupancy Sensor(s)
section of this guide).
• Zone Toggle. Allows an input to toggle one or more zones
between programmable preset level(s) and off.
• Shade Output mode. A Shade Column on the
GRAFIK Eye QS control unit can be linked to control
outputs 1-3 and/or outputs 4-5 on the QSE-IO.
Accessory Controls:
DMX Output Interface (QSE-CI-DMX)
• Any zone on the GRAFIK Eye QS control unit can be
mapped to any single DMX512 Channel.
• Any zone on the GRAFIK Eye QS control unit can be
simultaneously mapped to any three DMX512 channels
(providing RGB/CMY control).
• DMX loads cannot be used with daylighting.
Accessory Controls: Ethernet and RS232 Interface
(QSE-CI-NWK-E)
• Allows for monitoring and control of the outputs and local
scenes of the GRAFIK Eye QS control unit.
Accessory Controls: QS Keyswitch Wallstations
(QSWS2-KS)
• Recalls preset light levels for any two scenes
including Off.
• Allows fine-tuning (raise/lower level) of a zone or
group of zones.
• Starts/Stops scene sequencing
(Scenes 1-4 or Scenes 5-16)
• Enables/Disables Timeclock
• Enables/Disables occupancy sensors
• Enables/Disabled daylight sensors
• Allows toggle of Zone(s) to a preset level and off.
• Enables/Disables panic mode.
• Starts/Stops afterhours mode.
6
Preset Dimming Controls
369310g 7 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Specifications
EcoSystem Ballasts and Devices
• Supports all EcoSystem ballasts (maximum of 64 ballasts
per GRAFIK Eye control unit)
• Supports occupancy and daylight sensors wired
to a ballast
• Does NOT support IR sensors (or IR keypads) wired to
the ballast
Other Accessory Controls and Devices
• Energi Savr Node QS (ESN). See the Specification
Submittal for complete details.
Occupancy Sensor(s)
• The GRAFIK Eye QS control unit works with occupancy
sensors through either:
- Scene Control: Up to 16 sensors activate user-selected
occupancy and vacancy scenes.*
- Zone Control: Up to four sensors per zone activate
user-selected occupancy and vacancy zone levels.
• Occupancy sensors may include:
- Contact closure sensors wired to CCI input on back of
GRAFIK Eye QS control unit
- Wired or wireless sensors connected
QS Sensor Module (QSM)
• If any sensor in a group detects occupancy, then the
GRAFIK Eye QS control unit will go to the designated
occupancy scene or zone level.
• If all sensors in a group detect vacancy, then the
GRAFIK Eye QS control unit will go to the designated
vacancy scene or zone level.
• Low battery: the Diagnostics screen will display a low
battery symbol when applicable.
• If the GRAFIK Eye QS control unit does not receive a
signal from an occupancy sensor on the link (usually due
to a dead battery), the lights associated with that sensor
will go to the occupied level.
Daylight Sensor(s)
• The GRAFIK Eye QS with EcoSystem control unit works
with compatible daylight sensors to adjust electric light
levels based on measured daylight levels. Sensors can
be configured to control either GRAFIK Eye QS zones or
groups of EcoSystem loads independent of zoning.
• Daylight sensors may include:
– Wired sensors connected to EcoSystem ballasts or
interfaces
– Wired or wireless sensors connected to a QS sensor
module (QSM)
• In Zone Mode, a daylight sensor can control one or more
GRAFIK Eye QS zones. Each zone can be calibrated to
target light levels.
– A zone can be controlled by no more than one
daylight sensor
• In Group Mode, a daylight sensor can control one or more
EcoSystem loads, regardless of how they are zoned on the
GRAFIK Eye QS control unit.
– A group can be controlled by a single daylight sensor
– Each group can be calibrated to independent target
light levels
– Up to 16 groups are available
• Daylight control can be enabled or disabled on a
scene-by-scene basis
– By default, daylight control is enabled in all scenes
Note: Daylight control through the GRAFIK Eye QS control
unit only affects select lighting loads. Shade groups cannot
be controlled by daylight sensors. Daylighting does not
affect DMX or RGB/CMY DMX loads.
Daylighting of Remote Zones linked to Energi Savr Node
zones must be configured at the Energi Savr Node unit or
through the Energi Savr Node app for iPod.
* Applicable only to units that ship with firmware version 9.002 and higher. Previous versions support up to 4 sensors.
7
Preset Dimming Controls
369310g 8 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Contact Closure Input (CCI) with Power Supply Output
• Each GRAFIK Eye QS control unit has one contact closure
input (Terminal A).
– The attached device must provide a dry contact closure
or solid-state output.
– Input is miswire-protected up to 36 V-.
• The contact closure is capable of accepting the following
types of inputs:
– Maintained (default): The GRAFIK Eye QS control unit
will act on both a contact closure and a contact open/
release event.
– Momentary: The GRAFIK Eye QS control unit will act on
only contact closure events.
• Each GRAFIK Eye QS control unit can supply 50
mA maximum at 24 V-.
– Useful for powering occupancy sensors.
– An auxiliary power supply must be used if the device
requires more than 50 mA.
• The CCI is capable of operating in the following modes
– Occupancy: If an occupancy sensor is wired directly to
the GRAFIK Eye QS control unit.
– Emergency: This setting allows the GRAFIK Eye QS
control unit to work with a LUT-ELI. When an emergency
situation is detected, all lights will go to full on, and no
operations will be allowed until the emergency signal
is cleared.
– Afterhours: Allows the CCI to start and end the
afterhours mode.
– Timeclock: Allows the CCI to enable and disable
the timeclock.
– Scene Lockout: Prevents the user from making any
changes to the control unit. The current scene will stay
on until the CCI enables normal operation.
– Save Never: Prevents any changes from being saved
while the CCI is being used.
– Disable CCI: The CCI will have no effect on the system
and will not appear on the list of available sensors.
Security Lockout Password
• A 4-digit password (using characters A to Z and 0 to
9) can be enabled/disabled to lock out access to the
Programming Menu.
• By default there is no password enabled on the GRAFIK
Eye QS control unit.
• If case the 4-digit password is forgotten, contact Lutron
Customer Assistance to regain access.
Specifications
Remote Zone Mapping
• Map a GRAFIK Eye QS zone directly to an Energi Savr Node
output so that programmed scenes in the GRAFIK Eye QS
control unit will directly control the output levels of the
Energi Savr Node.
• Adjust high-end and low-end trim for remote zones through
the Energi Savr Node or Energi Savr app software.
• Change load types of remote zones through the Energi Savr
Node or Energi Savr app software.
• Configure daylighting for remote zones through the Energi
Savr Node or Energi Savr app software.
• Required:
– GRAFIK Eye QS control unit with firmware version
7.000 or higher
– Energi Savr Node unit with firmware version
6.000 or higher
– Energi Savr app version 6.0.0 or higher (required only if the
Energi Savr Node unit has been configured using the app)
Partitioning
• When partition is open, creating one large space,
automatically combines lighting preset functions for multiple
GRAFIK Eye QS control units.
• When partition is closed, creating two or more smaller
spaces, lighting preset functions become independent.
• Requires one wallstation (either a QSWS2, QSWS2-2B or a
QSE-IO), a GRX-IRPS infrared transmitter/receiver pair, and
a GRX-12VDC power supply for operation.
• If occupancy sensors are required in a partitioned space,
note that each room’s occupancy sensor(s) will operate
independent of the partition status.
8
Preset Dimming Controls
369310g 9 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
220 – 240 V~ 50 / 60 Hz 120 – 127 V~ 50 / 60 Hz
Unit Capacity (watts) 3000 2000
MLV 3000 VA / 2400 W 2000 VA / 1600 W
Zone Capacity (watts) 40 – 1200 2 – 800
MLV 40 – 1200 VA / 40 – 960 W 25 – 800 VA / 25 – 600 W
Load Type Notes (Zones 1, 2 and 3)
• All electronic low-voltage (ELV) lighting used with an interface must be rated for reverse phase control dimming. Before
installing an ELV light source, verify with the manufacturer that their transformer can be dimmed. When dimming, an ELV
interface (such as the PHPM-PA-DV-WH) must be used with the control unit.
• Not all zones must be connected; however, connected zones must have a minimum load as specified above.
• Maximum total lighting load for a magnetic low-voltage (MLV) varies by input voltage:
– 120 – 127 V~: 800 VA / 600 W
– 220 – 240 V~: 1200 VA / 960 W
• Maximum total lighting load for Lutron Tu-Wire and Advance Mark XR electronic dimming ballasts (120 to 127 V~ only)
must not exceed 6 A per zone or 16 A per unit.
• No zone may be loaded with more than the capacity specified above. For higher wattage applications, or for 277 V~
applications, use Lutron power module PHPM-PA, PHPM-WBX, PHPM-PA-DV, PHPM-SW-DV, or PHPM-WBX-DV.
• For controlling low-wattage loads (CFL, LED) in a non-dim application, contact Lutron Customer Assistance for the
appropriate solution.
System Limits
• The QS wired communication link is limited to 100 devices or 100 zones.
Capacities
®
9
Preset Dimming Controls
369310g 10 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
GRAFIK Eye QS with EcoSystem Control Unit
Custom Color Options and Model Numbers
You must order a Base Unit and a Faceplate Kit
See Standard Color Combinations page for faceplate, stripe, and button colors
Base Unit
QSGR - _ E
Prefix
Number
of Zones
6 = 6 zones
8 = 8 zones
16 = 16 zones
EcoSystem
Example:
QSGR-6E
6-zone base unit
and
QSGFP-2WH-G
Ivory faceplate kit with two
shade columns and general
engraving
QSGFP - WH -
Faceplate
Prefix
Number
of Shade
Columns
Omit = none
1 = 1 column
2 = 2 columns
3 = 3 columns
Top
Door
Color
Standard Engraved Faceplate Kit (WH only)
(includes coordinating stripe and buttons)
Keypad
Engraving
Code
Omit = same as
unit
T = Translucent
Keypad Engraving Codes
-G = Generic
-S = Shades
-H = Hotel Room
-A = Auditorium / Classroom
-L = Lobby / Retail
-R = Restaurant
-M = Meeting Room
-B = Ballroom
-Z = Zone Toggle
10
Preset Dimming Controls
369310g 11 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
GRAFIK Eye QS with EcoSystem Control Unit (continued)
Standard Engraved Faceplate Kit (WH only) (continued)
Generic (-G) Meeting Room (-M)
Ballroom (-B)
Zone Toggle (-Z)
Shades (-S)
Hotel Room (-H)
Auditorium / Classroom (-A)
Lobby / Retail (-L)
Restaurant (-R)
1
2
4
3
Off
Open
Preset 1
Preset 3
Preset 2
Close
High
Medium
Nightlight
Low
Off
All On
Present
Exam
Lecture
All Off
All On
Morning
Evening
Afternoon
All Off
All On
Breakfast
Dinner
Lunch
All Off
All On
Meeting
Cleaning
A / V
All Off
All On
Event 1
Event 3
Event 2
All Off
Zone 1
Zone 2
Zone 4
Zone 3
Zone 5
* Standard engraving text does not automatically assign or re-assign system programming to the QS keypad buttons.
Project-specific customer input and programming by a Lutron service team member is still required to achieve a desired
sequence of operation / system functionality per control.
11
Preset Dimming Controls
369310g 12 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
QSGFP - -
Faceplate
Prefix
Color/
Finish
Number
of Shade
Columns
Omit = none
1 = 1 column
2 = 2 columns
3 = 3 columns
Architectural Matte
Finishes
Standard
(ship in 48 hours)
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Architectural Metal
Finishes
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum
Finishes
Clear CLA
Black BLA
Brass BRA
Satin Color Matte
Finishes
Snow SW
Midnight MN
Taupe TP
Biscuit BI
Eggshell ES
Palladium PD
Hot HT
Merlot MR
Plum PL
Sienna SI
Terracotta TC
Bluestone BG
Greenbriar GB
Goldstone GS
Mocha Stone MS
Stone ST
Desert Stone DS
Limestone LS
Top
Door
Color
GRAFIK Eye QS Wireless with EcoSystem Control Unit (continued)
Custom (non-standard) Faceplate Kit
(includes coordinating stripe and buttons)
Faceplate Custom Color/Finish Codes
Keypad
Engraving
Code
Keypad Engraving Codes
Omit = Unengraved
Ships with engraving certificate that
customer can redeem at no charge
EGN = General Engraving
NST = Non-Standard Text Engraving
Please visit the GRAFIK Eye QS website
at www.lutron.com/grafikeyeqs
for custom engraving forms. Submit
completed form with order, and unit will
ship engraved as specified by customer.
Omit = same as
unit
T = Translucent
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
1
2
3
4
Off
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
Open
Preset
Close
Lighting
keypad
Shade
column
For the latest color offerings please see our website:
http://www.lutron.com/satincolors
12
Preset Dimming Controls
369310g 13 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
QSGB - 5B - WH -
Custom Button
Kit Prefix
Keypad
Engraving
Code
Button
Configuration
3BRL = 3-button with
raise/lower
(shade column)
5B = 5-button
(lighting keypad)
Button
Color/
Finish
GRAFIK Eye QS with EcoSystem Control Unit (continued)
Custom Options and Model Numbers
See previous page for Custom Model Numbers
See Standard Color Combinations page for faceplate, stripe, and button colors
Custom Button Kit
Button Kit Custom
Color/Finish Codes
Architectural Matte
Finishes
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Satin Color Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
Custom Stripe Kit
QSGS - WH
Stripe
Kit
Prefix
Stripe Color/
Finish
Stripe Custom Color/Finish Codes
Same as Faceplate colors on previous page
Keypad Engraving Codes
Omit = Unengraved
Ships with engraving certificate that
customer can redeem at no charge
EGN = General Engraving
NST = Non-Standard Text Engraving
Please visit the GRAFIK Eye QS website
at www.lutron.com/grafikeyeqs
for custom engraving forms. Submit
completed form with order, and unit will
ship engraved as specified by customer.
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
1
2
3
4
Off
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
Open
Preset
Close
Lighting
keypad
Shade
column
For the latest color offerings please see our website:
http://www.lutron.com/satincolors
13
Preset Dimming Controls
369310g 14 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
GRAFIK Eye QS with EcoSystem Control Unit (continued)
Standard Color Combinations
See previous pages for Custom Model Numbers
Suffix Faceplate (F) Stripe (S) Button (B)
Architectural Matte
WH White Gray White
IV Ivory Beige Ivory
BE Beige Ivory Beige
GR Gray Black Gray
BR Brown Black Brown
BL Black Gray Black
AL Almond Light Almond Almond
LA Light Almond Almond Light Almond
Architectural Metal
BB Bright Brass Black Black
BC Bright Chrome Black Black
BN Bright Nickel Black Black
SB Satin Brass Black Black
SC Satin Chrome Black Black
SN Satin Nickel Black Black
QB Antique Brass Black Black
QZ Antique Bronze Black Black
Anodized
CLA Clear Black Black
BLA Black Black Black
BRA Brass Black Black
Suffix Faceplate (F) Stripe (S) Button (B)
Satin Matte
SW Snow Gray Snow
MN Midnight Gray Black
TP Taupe Gray Taupe
BI Biscuit Eggshell Biscuit
ES Eggshell Beige Eggshell
PD Palladium Gray Gray
HT Hot Taupe Taupe
MR Merlot Taupe Taupe
PL Plum Taupe Taupe
SI Sienna Brown Brown
TC Terracotta Taupe Taupe
BG Bluestone Gray Gray
GB Greenbriar Gray Gray
GS Goldstone Ivory Ivory
MS Mocha Stone Taupe Taupe
ST Stone Gray Gray
DS Desert Stone Taupe Taupe
LS Limestone Gray Gray
LUTRON
1
2
3
4
Off
Preset
Close
Open
F (faceplate)
F (faceplate)
B (buttons)
S (stripe)
Faceplate is comprised of a top and bottom.
The bottom will always be the color indicated
under “faceplate.” The top may be the
same color or translucent. Use the chart for
faceplates that have the same color top and
bottom. If a translucent lid is chosen, the
stripe will automatically be the same color as
the bottom lid.
Example:
If you order QSGR-6E-1WH, your GRAFIK Eye
QS control unit with 6 lighting zones and 1
shade column will come with a white faceplate
(both top and bottom), gray stripe, and |
white buttons.
For the latest color offerings please see our website:
http://www.lutron.com/satincolors
14
Preset Dimming Controls
369310g 15 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
EcoSystem bus (E1, E2)
Overview
Load wiring
Power wiring
Communication link
Occupancy sensor/contact closure input
and 24 V- power
IR input
Terminations
Maximum EcoSystem
Wire Gauge Bus Length
12 AWG (4.0 mm
2
) 2200 ft (671 m)
14 AWG (2.5 mm
2
) 1400 ft (427 m)
16 AWG (1.5 mm
2
) 900 ft (275 m)
18 AWG (1.0 mm
2
) 570 ft (175 m)
15
Preset Dimming Controls
369310g 16 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Power Group Wiring Example
On the QS link, there are devices that supply power and devices that consume power. Each device has a specific
number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that
supplies power and one or more devices that consume power; each Power Group may have only one power-supplying
device. Refer to the Power Draw Units on the QS Link Spec (369405) on www.lutron.com for more information
concerning PDUs.
Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.
Between devices on the QS link that supply power, connect only terminals 1, 3, and 4 (NOT terminal 2), shown by the
letter B on the diagram.
Wiring can be T-tapped or daisy-chained.
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Power Group 1
Power Group 2
Power Group 3
A
A
A
B
B
B
(Do not connect
terminal 2: 24 V-)
(Do not connect
terminal 2: 24 V-)
(Do not connect
terminal 2: 24 V-)
Connect all 4
terminals within a
power group:
1: Common
2: 24 V-
3 and 4: Data
Connect only 3
terminals between
power groups:
1: Common
3 and 4: Data
Do not connect
Terminal 2: 24 V-
A
B
GRAFIK Eye QS
control unit
Supplies PDUs
QS Power Supply
Supplies PDUs
Energi Savr Node QS unit
Supplies PDUs
Control Interfaces
Consume PDUs
Control Interfaces
Consume PDUs
Quantum panel
Supplies PDUs
Wallstations
Consume PDUs
Wallstations
Consume PDUs
Wallstations
Consume PDUs
QS Sensor Module with
wired Occupancy Sensor
Consumes PDUs
Wireless Occupancy Sensor
does not consume PDUs
16
Preset Dimming Controls
369310g 17 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Line Voltage Wiring
Distribution Panel
1234
12
ABC
123456LN
To Load 1
To Load 2
To Load 3
Rear of
GRAFIK Eye QS
control unit
• Pull power wiring from distribution panel and to light fixtures.
• Each line voltage terminal can accept one 12 AWG (4.0 mm
2
) wire.
• Consult Lutron for non-dim relay wiring and/or load side emergency transfer wiring.
Line voltage (hot/live)
is labeled L.
120-127 V~
or
220-240 V~
Do not use
}
Loads 1, 2, 3
120-127 V~
or
220-240 V~
17
Preset Dimming Controls
369310g 18 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
EcoSystem Bus Wiring
LUTRON
EcoSystem Bus
GRAFIK Eye QS
with EcoSystem
(limit one per
EcoSystem link)
EcoSystem
Ballast
EcoSystem
Ballast
EcoSystem
Ballast
EcoSystem
Module
Eco-10 or
Hi-Lume
Ballast
Occupancy
Sensor
Daylight Sensor
To additional ballasts and
modules (up to 64 total)
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
1234
12
AB
C
123456LN
EcoSystem Bus Link Terminal Detail
EcoSystem
ballasts
To additional
EcoSystem ballasts
E2
E1
E2
E1
EcoSystem Bus Wiring Example
18
Preset Dimming Controls
369310g 19 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
IEC PELV/NECR Class 2 QS System Wiring
• Wiring can be daisy-chained or T-tapped.
• Wiring must be run separately from line/mains voltage.
• Total length of control link must not exceed 2000 ft (610 m).
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON LUTRON
LUTRON
GRAFIK Eye QS
Control Unit
Sivoia QS
Shade
seeTouch QS
wallstations
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON LUTRON
LUTRON
Daisy-Chain Wiring Example
T-Tap Wiring Example
GRAFIK Eye QS
Control Unit
Sivoia QS
Shade
Sivoia QS
smart panel
Sivoia QS
smart panel
seeTouch QS
wallstations
Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 500 ft (153 m) Power (terminals 1 and 2)
1 pair 18 AWG (1.0 mm
2
) GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
500 to 2000 ft
(153 to 610 m)
Power (terminals 1 and 2)
1 pair 12 AWG (4.0 mm
2
) GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
19
Preset Dimming Controls
369310g 20 12.20.19
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Control Unit with EcoSystem
Mounting
Fits into a 4-gang
U.S. backbox, 3`
in (90.4 mm) deep
(Lutron P/N 245-254)
or
3 in (76.2 mm) deep
(Lutron P/N 241-400)
Mounting
screws (4)
GRAFIK Eye QS
with EcoSystem
control unit
Hinged
bottom lid
Hinged
top lid
)Lutron, Lutron, GRAFIK Eye, Quantum, seeTouch, Sivoia, Softswitch, Tu-Wire, Pico, Hi-lume, Eco-10, EcoSystem, Energi Savr Node and RTISS are
trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.
iPod is a trademark of Apple Inc. registered in the U.S. and other countries.
All product names, logos, and brands are property of their respective owners.
20
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics GRAFIK Eye QS Control Unit with EcoSystem spec

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 16 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document