Fill - Free fillable 369918 ENG Vive PowPak Fixture Control Spec Submittal 369918 PDF form

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 1 03.12.18

Vive PowPak Fixture Controls

The PowPak wireless ﬁxture control is a radio-frequency (RF)

device that controls either the Lutron EcoSystem or 0 –10 V-

electronic ﬂuorescent ballasts and LED drivers (depending on

model). This is based on RF input from Pico remote controls,

Radio Powr Savr wireless sensors, or wired inputs from the

PowPak ﬁxture sensor. The control module mounts to a ﬁxture or

a U.S.-style junction box. Communication with RF input devices is

accomplished using Lutron Clear Connect RF Technology. See

Applications and Selecting the Right Control for more details

on selecting the appropriate controls for your application.

The PowPak ﬁxture sensor (optional) mounts to the ceiling or to a

ﬁxture and measures light in the space (daylighting) while detecting

people moving within an area to determine passive infrared

occupancy. The sensor controls the lights to balance light level in

the space, combining convenience, exceptional energy savings,

and ease of installation. The sensor contains two wires which

connect to the PowPak wireless ﬁxture control.

These products are also compatible with the Vive hub which

enables a simple setup process using a standard web browser on

any Wi-Fi

® enabled phone, tablet or computer. It also enables

control and monitoring of all Vive devices. The Vive hub can be

added at any time. System reprogramming will be required. For a

complet

e list of features supported with the Vive hub, see

speciﬁcation submittal 369902 at www.lutron.com

Note for Replacement: FCJS - the “S” model can replace the

non-”S” model.

Models Available

Model Number Description

FC-SENSOR PowPak ﬁxture sensor (occupancy)

FC-VSENSOR

PowPak ﬁxture sensor (vacancy)

FCJS-010

PowPak wireless ﬁxture control for 0-10 V- ballasts and drivers

FCJS-ECO

PowPak wireless ﬁxture control for EcoSystem ballasts and drivers

FCJS-010-EM

Emergency PowPak wireless ﬁxture control for 0-10 V- ballasts and drivers

FCJS-ECO-EM

Emergency PowPak wireless ﬁxture control for EcoSystem ballasts and drivers

PowPak Wireless Fixture Control

Lights do not turn on automatically with a vacancy sensor. A Pico remote control is needed to turn on the lights.

For a bulk pack of 8 pieces, order FCJS-010-BULK8.

For a bulk pack of 8 pieces, order FCJS-ECO-BULK8.

PowPak ﬁxture sensor

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 2 03.12.18

Suggested applications:

PowPak Fixture Sensor:

– Great for individual control in cubicles

– Maximize energy savings (ﬁxtures in unoccupied

spaces do not turn on)

– Simpliﬁes the determination of what’s needed for a job

Radio Powr Savr Sensors:

– Cover large areas with a single sensor

– Sensor can mount anywhere in the space

– Fixtures assigned to Radio Powr Savr occupancy

sensors turn on and off together

– In order to have a row of ﬁxtures dim up or down

together in response to daylight, a Radio Powr Savr

daylight sensor must be used

Applications and Selecting the Right Control

Daylighting:

Radio Powr Savr vs. PowPak Fixture Sensor

PowPak wireless ﬁxture controls have two options for

daylighting. The PowPak ﬁxture sensor can be used for

simple, out-of-the-box daylighting. The Radio Powr Savr

wireless daylight sensor can be added for the ability to

adjust and ﬁne tune daylighting settings.

• Radio Powr Savr daylight sensors provide the ultimate

ﬂexibility in daylighting: target light level (tuning) and

gain value (through calibration) can be adjusted

independently. Daylighting rows/zones can be setup

so that multiple ﬁxtures dim in unison (also known as

“grouping”). Radio Powr Savr daylight sensors can be

placed anywhere since they are completely wireless, and

performance can be optimized through placement and

ﬁne tuning.

• PowPak ﬁxture sensors are an easy way to add simple

daylighting to a localized area without requiring setup.

PowPak ﬁxture sensors are quick to install with a two-

wire connection, and calibrate automatically. Each

PowPak ﬁxture sensor should be mounted within 2 ft

(0.6 m) of the ﬁxture it is controlling.

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 3 03.12.18

Notes:

• When using a Radio Powr Savr daylight sensor in conjunction with both a PowPak wireless ﬁxture control and

PowPak ﬁxture sensor, the Radio Powr Savr daylight sensor will provide the daylighting input to the control

module, and the PowPak ﬁxture sensor daylighting input will be ignored.

• When using a Radio Powr Savr occupancy sensor in conjunction with both a PowPak wireless ﬁxture control and

PowPak ﬁxture sensor, occupancy data from both sensors is used; either one detecting occupancy will turn the

lights on, and the lights turn off only when both sensors have gone vacant (no longer detect occupancy).

• Grouping can be accomplished by following the basic procedure described in the install guide found at

www.lutron.com for putting multiple control modules into association mode. This enables a Radio Powr Savr

occupancy sensor or Radio Powr Savr daylight sensor to group and control more than one ﬁxture together.

• Radio Powr Savr occupancy sensors can be used with the PowPak ﬁxture sensor to add coverage area.

Wired:

• Maximum of 1 PowPak ﬁxture sensor.

Note: Only 1 PowPak wireless ﬁxture sensor

can be wired per PowPak ﬁxture control.

Grouping more than 1 PowPak wireless

ﬁxture sensor to control a group of PowPak

wireless ﬁxture controls requires adding a

Vive hub.

Wireless:

• Maximum of 10 Pico remote controls

• Maximum of 10 Radio Powr Savr

occupancy sensors

• Maximum of 1 Radio Powr Savr

daylight sensor

Test

Link

Test

Link

Pico remote control

(up to 10)

Radio Powr Savr

occupancy sensor

(up to 10)

Radio Powr Savr

daylight sensor

(1 maximum)

PowPak

wireless

ﬁxture

control

PowPak ﬁxture

sensor

The following can be used per each PowPak wireless ﬁxture control:

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 4 03.12.18

Speciﬁcations

PowPak Fixture Sensor

Regulatory Approvals

• FC-SENSOR, FC-VSENSOR:

– cULus Listed

• Complies with requirements for use in other spaces

used for environmental air (plenums) per

NECR 2014 300.22(C)(3)

Power/Load

• Operating voltage: 12 V-

• Operating current: 25 mA

• IEC SELV / NECR Class 2

Environmental

• Ambient operating temperature: 32 °F to 104 °F

(0 °C to 40 °C), 0%–90% humidity, non-condensing;

indoor use only

Warranty

• 5 Year Limited Warranty. For additional Warranty

information, please visit: www.lutron.com/

TechnicalDocumentLibrar y/Sensor_Warrant y.pdf

Wiring

• Sensor wires are IEC SELV / NECR Class 2 rated

Settings

• Occupancy sensor timeout (ﬁxture sensor): 15 minutes

• Utilizes a green laser pointer (by others, not a Lutron

product) to associate Pico remote controls and Radio

Powr Savr sensors to PowPak wireless ﬁxture controls

via RF. See Lutron Application Note #407

(P/N 048407 at www.lutron.com) for more information.

– Green laser speciﬁcations:

∙ Wave output: constant

∙ Wavelength: 532 nm

∙ Output power: 5 mW maximum

• 2-wire connection between a PowPak ﬁxture sensor

and a PowPak wireless ﬁxture control

– The wires are interchangeable to eliminate miswiring

– The sensor comes with 2 ft (0.6 m) of wires

– If hanging pendant ﬁxtures, the maximum wire

length between ﬁxture sensor and ﬁxture control is

12ft (3.7 m). Sensor should be mounted no more

than 2 ft (0.6 m) from the ﬁxture.

Sensor

Green Laser

WARNING

DANGER

Eye injury and/or blindness hazard; avoid direct eye exposure to laser beam.

• Use of laser pointer is NOT recommended for use with Lutron products located near reﬂective surfaces.

• Do NOT aim or shine laser pointers at any person, pet, vehicle, or aircraft directly, or through reﬂection by mirrors or

other shiny surfaces. Do NOT view the laser beam through binoculars, magnifying glass, or other optical devices.

• Do NOT allow children to use laser pointers.

• Read and follow the laser pointer manufacturer’s instructions on safe use. In the event of injury, get

medical attention immediately.

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 5 03.12.18

Speciﬁcations (continued)

PowPak Fixture Sensor

(continued)

Features

Occupancy Sensor:

• Passive infrared motion detection with exclusive Lutron

XCT Technology for major and minor motion detection.

• 360˚ ﬁeld-of-view.

• Up to 300 ft

(27.9 m

) major motion coverage and 150ft

(13.9 m

) minor motion coverage.

Daylight Sensor:

• Daylight sensor has simple, automatic calibration

out-of-the-box.

• Designed to give a linear response to changes in

perceived light level.

• Detects ambient light level changes from 0 to 1600 lx

(0 to 150 fc).

• Daylight compensation through Lutron reliable closed

loop proportional control. For more information, see

www.lutron.com/TechnicalDocumentLibrary/daylighting_

white-paper.pdf

PowPak Wireless Fixture Control

Regulatory Approvals

• Title 20/24 certiﬁed lighting control device. Complies

with Title 20 and Title 24 section 110.9

• Enables compliance with lighting control requirements

in ASHRAE 90.1 and IECC

• Complies with requirements for use in other spaces

used for environmental air (plenums) per

NECR 2014 300.22(C)(3)

• Listed in accordance to CAN/ULC S102.2-2010 with

a Flame Spread Rating of 0 and a Smoke Developed

Classification of 40, with a minimum spacing of 6 ft

(1.83 m) off center

• FCJS-010, FCJS-ECO:

– cULus Listed

– IC (Canada)

– NOM Certiﬁed

– FCC Approved. Complies with the limits for a

Class B digital device, pursuant to Part 15 of the

FCC Rule

• FCJS-010-EM, FCJS-ECO-EM:

– cULus Listed

– IC (Canada)

– NOM Certiﬁed

– FCC Approved. Complies with the limits for a

Class B digital device, pursuant to Part 15 of the

FCC rule

– UL 924 Listed

Environmental

• Ambient operating temperature: 32 °F to 104 °F

(0°Cto 40 °C), 0%–90% humidity, non-condensing;

indoor use only

• All drivers and ballasts used with Vive wireless

con

trols must comply with the limits for a Class A

device, pursuant to Part 15 of the FCC rules

Wiring

• Control wires can be run as either Class 1 or Class 2

– FCJS-010 (gray and violet wires)

– FCJS-ECO (violet wires)

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 6 03.12.18

Speciﬁcations (continued)

PowPak Wireless Fixture Control

(continued)

Power / Load

• Operating voltage: 120–277 V~ 50/60 Hz

• Power measurement: Accurate to ±2%, or 0.5 W,

whichever is higher

•

1 A switching maximum, electronic ballast or LED driver

• No more than 3 drivers or ballasts

• Standby power consumption < 1 W

• Works with all ballasts and drivers that provide a current

source compliant to IEC 60629 Annex E.2, and whose

inrush current does not exceed NEMA410 standards for

electronic ballast/driver

• FCJS-010

– Controls up to 6 mA of 0–10 V- controlled ﬁxtures.

∙

Controls up to 3 ballasts or drivers (IEC 60929 Annex

E.2 requires the ballast or driver to limit the current

draw to 2.0 mA maximum)

– 0–10 V- control link on FC-010 automatically sources

or sinks to third-party ﬁxtures

• FCJS-ECO

– Connects to Lutron EcoSystem LED drivers or ballasts.

∙

Controls up to 3 EcoSystem ballasts or drivers

∙

Multiple ballasts or drivers control only one combined

zone of lighting.

Frequency

•

431.0– 437.0 MHz (U.S.A., Canada)

Range

• Wireless sensors and controls must be located within

60ft (18 m) line of sight, or 30 ft (9 m), through walls, of

the associated control module.

• Utilizes Lutron Clear Connect RF Technology

Settings

• Low-end trim adjustment (default is 1 V- or ballasts /

drivers minimum for Lutron EcoSystem).

• High-end trim adjustment (default is 10 V- or 100%

for Lutron EcoSystem ballasts/drivers).

• Minimum Light Level Setting (optional). Certain

applications, such as hallways, may require that

the lights never turn off. For these areas, select the

minimum light level option and the load will lower to

programed low-end level.

• Daylighting dims lights down to OFF.

• Occupied light level can be changed via the Radio

Powr Savr occupancy sensor.

• Favorite light level can be set using a Pico remote

control.

• Power failure memory: If power is interrupted,

connected loads will return to the previous level prior to

interruption

Mounting

•

Wireless ﬁxture control mounts to a ﬁxture or a U.S.-

style junction box through a standard 1/2 in (12.7 mm)

knockout. Note: The wireless ﬁxture control needs to be

accessible for some programming steps. Record where it

is mounted so that it can be easily located later.

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 7 03.12.18

For more guidelines and installation best practices, refer to Lutron Application Note #620 (P/N 048620) at www.lutron.com

Speciﬁcations (continued)

PowPak Wireless Fixture Control

(continued)

Emergency Model Sequence of Operation

With a Vive hub:

• Normal mode: The FCJS-010-EM / FCJS-ECO-EM

can dim loads as normal and respond to local button

presses, Pico wireless controls, and occupancy /

daylight sensors.

• If the emergency PowPak wireless ﬁxture control loses

power for greater than 250 mS, it will automatically go

into emergency mode (full output, relay closed), when

emergency power is restored to the PowPak, for as long

as the Vive hub has no power. All local buttons, Pico

wireless controls and occupancy /daylight sensors will

not respond. The emergency light level of the emergency

PowPak can be conﬁgured using the Vive hub.

• When normal power is restored to the Vive hub and

emergency PowPak wireless ﬁxture control, the

emergency PowPak wireless ﬁxture control will return to

the previous light level in most cases within 3 minutes,

but guaranteed within 10 minutes of normal power being

restored. It will again accept local button control, input

from Pico wireless controls, and occupancy /

daylight sensors.

Without a Vive hub:

• Normal mode: The FCJS-010-EM / FCJS-ECO-EM

can dim loads as normal and respond to local button

presses, Pico wireless controls, and occupancy /

daylight sensors.

• If the emergency PowPak wireless ﬁxture control

loses power for greater than 250 mS, it will

automatically go into emergency mode (full output,

relay closed) for 90 minutes, when emergency power

is restored to the PowPak. All local buttons, Pico

wireless controls and occupancy /daylight sensors will

not respond for 90 minutes.

• When normal power is restored, the emergency

PowPak will remain in emergency mode for 90

minutes (full output, relay closed). It will then return

to the previous light level and accept local button

control, inputs from Pico wireless controls, and

occupancy/daylight sensors.

Warranty

• Please visit: www.lutron.com/

TechnicalDocumentLibrary/369-119_Wallbox_

Warranty.pdf

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 8 03.12.18

Dimensions

Wireless Fixture Control

Measurements shown as: in (mm)

1/2 in or 21 mm trade size

knockout opening

2.82

(72)

1.25

(32)

(610)

3.125

(79)

Sensor

Measurements shown as: in (mm)

22 AWG

(0.33 mm

)

solid wire

3.42

(87)

3.94

(100)

1.5

(38)

3.368

(86)

0.65

(17)

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 9 03.12.18

Sensor Detection Range

15 ft

(4.6 m)

9 ft

(2.7 m)

3 ft

(0.9 m)

0 3 ft

(0.9 m)

9 ft

(2.7 m)

15 ft

(4.6 m)

300 ft

(28 m

) major motion

Ceiling

Floor

9 ft

(2.7 m)

15 ft

(4.6 m)

9 ft

(2.7 m)

3 ft

(0.9 m)

3 ft

(0.9 m)

9 ft

(2.7 m)

15 ft

(4.6 m)

15 ft

(4.6 m)

9 ft

(2.7 m)

3 ft

(0.9 m)

0 3 ft

(0.9 m)

9 ft

(2.7 m)

15 ft

(4.6 m)

150 ft

(14 m

) minor

motion when mounted

on a 9 ft (2.7 m) ceiling

9.8 ft

(3 m)

6.9 ft

(2.1 m)

Recommended sensor

mounting height:

8-12 ft (2.4-3.7 m)

Deﬁnitions:

Major motion: Movement of a person entering or passing through an area.

Minor motion: Movement of a person occupying an area and engaging in small activities (e.g., reaching for a telephone,

turning the pages of a book, opening a ﬁle folder, picking up a coffee cup).

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 10 03.12.18

NOTE: Wireless sensors and controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls,

of the associated control module.

30 ft (9 m)

Maximum

Pico

Remote

Control

Range Diagrams

Fixture Control

Sensor

PowPak Wireless Fixture Control

Install the ﬁxture control directly to a ﬁxture or

on a junction box nearest to the ﬁxture. Install the sensor on the

ceiling near the ﬁxture to optimize coverage in the desired area.

NOTE: Avoid mounting the ﬁxture sensor in direct sunlight or

in the light which is cast from the ﬁxture.

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 11 03.12.18

Wiring / System Diagram

Switched

Line / Hot (Red)

Neutral (White)

Junction box or

ﬁxture

1/2 in (21 mm) knockout opening

Conduit nut

From back of sensor

Line / Hot (Black)

Neutral

Pico Remote Control

(up to 10)

PowPak wireless ﬁxture control

PowPak ﬁxture sensor

Test

Link

Radio Powr Savr

daylight sensor (1 maximum)

– (Grey)

+ (Violet)

FCJS-010

0–10 V-

E1 (Violet)

E2 (Violet)

FCJS-ECO

EcoSystem

polarity-free

digital link

0-10 V- or

EcoSystem Fixture

Ballast/Driver #1

Ballast/Driver #2

Ballast/Driver #3

Note: Multiple drivers/

ballasts connected

to FCJS-ECO will act

together as a single

zone.

Radio Powr Savr

occupancy sensor (up to 10)

PowPak Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless Fixture Controls

369918g 12 03.12.18

System Wiring Diagram (Vive Hub with Emergency PowPak)

PowPak

lutron.com

PowPak

lutron.com

PowPak

lutron.com

120 / 277 V~ Normal Feed

Neutral (N)

Line/Hot (L)

Junction Box Junction Box

0 –10 V-

Driver /

EcoSystem

Ballast /

LED Driver

FCJS-010 / FCJS-ECO

120 / 277 V~ Normal Feed

Neutral (N)

120 / 277 V~ Generator /

Emergency Feed

Neutral (N)

120 / 277 V~

Emergency Feed

Emergency

Backup Generator *

Automatic

Transfer

Switch

Junction Box

FCJS-010-EM /

FCJS-ECO-EM

Not Provided by Lutron

24 V-

Common

0 –10 V-

Driver /

EcoSystem

Ballast /

LED Driver

(+)

(–)

To additional

FCJS-010 /

FCJS-ECO PowPaks

To additional

FCJS-010-EM /

FCJS-ECO-EM

PowPaks

Emergency

0 –10 V-

Driver /

EcoSystem

Ballast /

LED Driver

Lutron, )Lutron, PowPak, EcoSystem, Pico, Vive, and Clear Connect are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.

Radio Powr Savr and XCT are trademarks of Lutron Electronics Co., Inc.

NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.

NOTE: Solution is not applicable for

Uninterruptable Power Supply (UPS)

backup system. FCJS-010-EM /

FCJS-ECO-EM must see a complete

change-over of power from normal

to emergency for the unit to go into

emergency mode.

FCJS-010: - (Gray), + (Violet)

FCJS-ECO: E1 (Violet), E2 (Violet)

FCJS-010: - (Gray), + (Violet)

FCJS-ECO: E1 (Violet), E2 (Violet)

FCJS-010-EM: - (Gray), + (Violet)

FCJS-ECO-EM: E1 (Violet), E2 (Violet)

Switched

Line/Hot

(+)

(–)

Switched

Line/Hot

(+)

(–)

Switched

Line/Hot

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

369918 ENG Vive PowPak Fixture Control Spec Submittal 369918

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank 369918 ENG Vive PowPak Fixture Control Spec Submittal 369918 Form

Related forms

Fillable 369918 ENG Vive PowPak Fixture Control Spec Submittal 369918

Fill Online, Printable, Fillable, Blank 369918 ENG Vive PowPak Fixture Control Spec Submittal 369918 Form

Related forms

First 20 documents completely FREE!