RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
Designer-style: Maestro
369904j 6 08.26.19
Specifications
Regulatory Approvals
• UL® Listed.
• cUL® Listed (MRF2S-6CL only).
• CSA Certified (except for MRF2S-6CL).
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
• Industry Canada Certified.
• The following model numbers have been tested and
found compliant with UL 2043 for use in air handling
spaces: MRF2S-6CL-GR, MRF2S-6ELV-GR,
MRF2S-6ND-GR
Power
Operating voltage:
• 120 V~ 50/60 Hz (all models)
• 277 V~ 50/60 Hz (MRF2S-8S-DV)
Environment
• Ambient operating temperature:
32 °F to 104 °F (0°C to 40 °C)
• 0% to 90% humidity, non-condensing.
• Indoor use only.
• All drivers and ballasts used with Vive wireless
controls must comply with the limits for a Class A
device pursuant to Part 15 of the FCC Rules.
Key Design Features
Dimmers
• On a single-tap, lights fade UP or DOWN.
• On a double-tap, lights go to full ON.
• Light levels can be fine-tuned by pressing and
holding the dimming rocker until the desired light
level is reached.
• Two-wire dimmers available.
Switches
• On a single-tap, lights turn ON or OFF.
• Two-wire switches available.
All RF Local Controls
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance
with IEC 61000-4-2.
• Tested to withstand surge voltages without
damage or loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on
Surge Voltages in Low-Voltage AC Power Circuits.
• Controls always operate locally and do not require
system control.
• Power failure memory: should power be interrupted,
the control will return to its previously-set level prior
to the interruption when power is restored.
• Uses conventional 3-way and 4-way wiring.
• Multiple location control from Dimmer / Switch and up
to nine Companion Dimmers / Switches.
• Use Lutron Designer (Claro and Satin Colors)
wallplates or designer-style wallplates from other
manufacturers. Wallplates are sold separately.
• Lutron Claro and Satin Colors wallplates snap on
with no visible means of attachment.
• Requires a one-gang U.S. wallbox; 3
1
⁄2 in (89mm)
deep recommended, 2
1
⁄4 in (57 mm) deep minimum.
• Green indicator lights.
System Communications and Capacity
• Maestro Wireless controls communicate with the
Pico remote controls and Radio Power Savr sensors
through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote
controls, 10 Radio Powr Savr occupancy / vacancy
sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located
within 60 ft (18 m) line-of-sight or 30 ft (9 m) through
walls, of Radio Power Savr sensors. The 60 ft (18 m)
range is not reduced by a ceiling tile obstruction.
• Maestro Wireless local controls must be located
within 60 ft (18 m) line-of-sight or 30 ft (9 m) through
walls, of a Pico remote control. The 60 ft (18 m)
range is not reduced by a ceiling tile obstruction.
