Fill - Free fillable 369314 GRAFIK Eye QS Wireless Control Unit with EcoSystem SPEC (369314) PDF form

Preset Dimming Controls

369314f 1 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

GRAFIK Eye QS Wireless Control Unit with EcoSystem

LUTRON

Off

Preset

Open

GRAFIK Eye QS Wireless with EcoSystem is the premier energy-

saving lighting and shade control. The GRAFIK Eye QS control

unit features an astronomic timeclock and intuitive lighting presets,

which are seamlessly integrated with EcoSystem LED drivers

and Lutron’s QS components and systems. Now with wireless

technology and an integral EcoSystem bus supply, you can choose

to use the phase control outputs to control screw in LED bulbs,

or use EcoSystem to control LED drivers and shades without

interfaces. You can also integrate with a variety of Lutron wireless

products and systems, including Radio Powr Savr occupancy,

vacancy, and daylight sensors, Sivoia QS wireless shades, Pico

wireless controls, and other GRAFIK Eye QS wireless control units.

Additionally, the GRAFIK Eye QS wireless control unit is compatible

with all Lutron wired QS products and systems, including Quantum.

Mechanical Dimensions

4$ in

(119 mm)

94 in

(239 mm)

4 in

(10 mm)

2 in

(51 mm)

Front View Side View

Fits into a 4-gang U.S. backbox, 3` in (90.4 mm) deep (Lutron P/N 245254) or

3 in (76.2 mm) deep (Lutron P/N 241400)

Preset Dimming Controls

369314f 2 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

System Topologies

The GRAFIK Eye QS Wireless control unit with EcoSystem can be specified in three different system topologies. Examples

of each are shown below.

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

Example of GRAFIK Eye-centric

Wireless System

Example of Mixed GRAFIK Eye-centric

Wired/Wireless System

Wireless

Sivoia QS

shade

Wireless

Sivoia QS

shade

Wired QS link

Wired

occupancy

sensor

Wireless

occupancy

sensor

30 ft

(10 m)

wireless

range;

60 ft

(20 m) in

open air

GRAFIK Eye QS

wireless control unit

GRAFIK Eye QS

wireless control unit

seeTouch QS

wallstations

Wireless

occupancy

sensor

GRAFIK Eye QS

wireless control unit

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

Example of Wired System

QSE-CI-NWK-E

Sivoia QS

shade

seeTouch

wallstation

Wired

occupancy

sensor

GRAFIK Eye QS

wireless control unit

GRAFIK Eye QS

wireless control unit

Pico®

wireless

control

Pico wireless

control

Wired QS link

Quantum

processor

QS Sensor

Module

Energi Savr

Node

unit

Wireless

daylight

sensor

Wireless

daylight

sensor

EcoSystem

LED driver

EcoSystem

LED driver

EcoSystem

LED driver

Preset Dimming Controls

369314f 3 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Application Suggestions and Differences between GRAFIK Eye QS with EcoSystem Control Unit

and Energi Savr Node with EcoSystem Unit

GRAFIK Eye QS

with EcoSystem

LUTRON

Energi Savr Node (ESN)

with EcoSystem

Suggested/Recommended Applications Single rooms, partitioned spaces,

e.g., conference room, classroom,

ballroom, lobby

Open spaces, multiple

enclosed rooms, e.g., open

office, window offices

Programming Method Info Screen on the QS control unit Via Energi Savr Node App

Integral Timeclock Yes Yes (using a QS Timeclock or

contact closure interface)

Compatible with seeTouch QS Keypads Yes Yes

Compatible with EcoSystem Wall Controls No Yes

Compatible with EcoSystem IR Sensors No Yes

Includes dry contact closure for integration to BMS

or Security Systems

Yes Yes

Input Voltage 120-127 or 220-240 V~ 50/60 Hz 120/240/277 V~ 50/60 Hz

Number of EcoSystem Busses 1 1 or 2

Number of Zones 6, 8, or 16 Programmable (maximum 100)

Number of Line-Voltage Outputs 3 (Zones 1-3 only) --

Compatible with other QS Devices Yes Yes

ESN

Mobile

digital

device

Wireless

router

GRAFIK Eye QS with

EcoSystem control unit

Preset Dimming Controls

369314f 4 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Features

• Lutron’sproprietaryClearConnectRFtechnology.

Operates in the 434 MHz band.

• Pushbuttonrecalloffourpresetlightingscenes,

plus Off.

• Sixteen(16)totalavailablescenes,plusOffscene.

• Zones1,2,and3cancontrolmanylightsource

types directly or through power modules.

• Optionalintegratedshadecontrolbuttons,which

can also be added to the unit after installation.

• Masteroverridebuttonstoraiseandloweralllights.

• Allowssetupoflightingscenesandshadepresets

using buttons on the control unit.

• Built-ininfrared(IR)receiver.

• ExternalIRconnection.

• Built-inastronomictimeclock.

• Infoscreenshowszonelightlevelpercentage,

energy savings, zone labeling, programming, and

EcoSystem setup.

• Lockoutoptionpreventsaccidentalchanges.

• Occupancysensorinputand24V- power for one

occupancy sensor.

• QScommunicationlinkforseamlessintegrationof

lights, motorized window treatments, occupancy

sensors, wallstations, and integration interfaces.

• CompatiblewithallLutronQSsystemcomponents.

• Wirelesscommunicationforseamlessintegration

with a variety of Lutron wireless products and

systems, including Radio Powr Savr occupancy,

vacancy, and daylight sensors, Sivoia QS wireless

shades, Pico wireless controls, and other

GRAFIK Eye QS Wireless control units.

• Controlupto6,8,or16EcoSystemzonesfrom

internal bus supply.

• Zones1,2,and3areintegrallinevoltagedimming

zones and can be optionally programmed as

EcoSystem zones.

• Upto64EcoSystemorHi-lumeLED drivers can be

addressed and grouped to zones.

• IntegralEcoSystemsetupandprogramming

through the info screen.

• Backlitbuttonswithengravingmakeuniteasyto

locate and operate.

• Availableinavarietyofcolorsandfinishes.

LUTRON

1 2 3 4 5 6

Optional

shade

control

keypad

Zone

control

Infrared

receiver

USBtype

miniB

Info

screen

Lighting

control

keypad

Off

Preset

Open

Preset

Open

Note: General Engraving (-EGN) shown.

Preset Dimming Controls

369314f 5 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

• Non-dim(incandescent,magneticlow-voltage,Tu-Wire,or

neon/cold cathode)

Please refer to “Capacities” for more information.

 Zones1,2,and3canalsocontrolthefollowinglighting

sources with a smooth, continuous square law dimming

curve or on a full conduction non-dim basis through

separate Lutron power modules:

• Electroniclow-voltagetransformers(useELVor

Phase-Adaptive power module)

• Lutron3-wirecontrolledelectronicfluorescentdimming

ballasts (use fluorescent 3-wire power module)

• Lutron3-wirecontrolledLEDdrivers(useflourescent3-wire

power module)

• Non-dim(useswitchingmodule)

• 0–10V(useTVI)

Note: A zone may be programmed to control only one load

type at a time.

Key Design Features

• RFmeetsFCCPart15ClassB.

• LightningstrikeprotectionmeetsANSI/IEEEstandard

62.41-1980. Can withstand voltage surges of up to

6000 V~ and current surges of up to 3000 A.

• Testedtowithstand16kVelectrostaticdischargewithout

damage or memory loss.

• RTISSEquipped:Compensatesinrealtimeforincomingline

voltage variations (no visible flicker with +/-2% change in

RMS voltage per cycle, and +/-2% Hz change in frequency

per second).

• Powerfailurememoryretainsprogrammingandlightlevel

settings for up to 10 years in the event of a power loss.

• TheGRAFIKEyeQScontrolunitsupplies3PowerDraw

Units (PDUs) on the QS link.

For complete information, see the Power Draw Units on

the QS Link Spec (369405) on www.lutron.com

• Faceplateishingedatthetopandbottom,andstaysopen

at 180° for ease of access.

• Directcontrolof120V~ and 277 V~ EcoSystem,

Hi-lume 3D, and Hi-lume LED ballasts (no interface required).

Input Power

• 120–127V~ 50/60 Hz

• 220–240V~ 50/60 Hz

Listings (120 – 127 V~)

• ULR Listed

• CSA

• NOM

• CEC(Title24)

• FCCPart15ClassB

• ICRSS-210

• SCT

Environment

• 32to104°F(0to40°C)

• Relativehumiditylessthan90%non-condensing

Lighting Sources/Load Types

AllZones

• Hi-lume and 5-series LED drivers directly wired to integral

EcoSystem digital link

•Beforesystemisaddressed,Zone4willtransmit

broadcast commands to all EcoSystem loads wired to

the GRAFIK Eye QS.

• ZonesonEnergiSavrNodeproductswiredtothesame

QS link

 –ZonesonEnergiSavrNodewithSoftswitch

 –ZonesonEnergiSavrNodefor0-10V

 –ZonesonEnergiSavrNodewithEcoSystem

Pleasereferto“RemoteZoneMapping”forimportant

information.

• DMXchannel(s)throughDMXoutputinterface

(QSE-CI-DMX).Pleasereferto“AccessoryControls:DMX

Output Interface”

Zones1,2,and3canalsocontrolthefollowinglighting

sources with a smooth, continuous square law dimming

curve or on a full conduction non-dim basis:

• DimmableLEDBulbs(foracompletelistofapproved

dimmable LEDs please call 1.800.523.9466 or visit

www.lutron.com/dimcflled)

• CreeLR4/6,120V~ fixtures (for loading capacities,

please refer to the LED report card located at

www.lutron.com/LEDtool)

• Incandescent

• Halogen

• Magneticlow-voltagetransformer

• LutronTu-Wireelectronicfluorescentdimmingballast

• LutronHi-lume2-wireLTELEDdriver

• AdvanceMarkXR electronic dimming ballast

• Neonandcoldcathode

Specifications

Preset Dimming Controls

369314f 6 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Zone Control

• Eachzonehasadedicatedraiseandlowerbuttontoadjust

the zone.

• Eachzonehasadedicated7LEDbargraphforlevelstatus.

Percentage of light level and energy saved is displayed on

the info screen.

• AllzoneinformationhasbluebacklitLEDs.Backlightturns

off when idle for 30 seconds.

• High-endandlow-endtrimsettingsareadjustableperzone

(high end from 99 to 55%; low end from 45 to 1%).

Note:Trimforremotezonesmustbeadjustedlocallyonthe

Energi Savr Node unit.

• Eachzoneisprogrammabletoonlyoneloadtypeatatime.

Info Screen

• OLED(organicLED)screenisviewablefromallangles.

• Screenturnsoffwhenidlefor30seconds.

• Programmablezonelabels.

• Programmablescenelabels.

• Statusofreal-timezonepercentageandenergysavings.

• Programmabletimeclockschedules.

• Programmableshadelabels.

• Selectabledisplaylanguages:

- English - Spanish - French

- Italian - German - Portuguese

Astronomic Timeclock

• Integraltoallunits.

• 7dailyschedulesavailable.

• Oneavailableholidayscheduleisprogrammablebydateup

to one year in advance.

• 25eventsperdaymaximum.

• Timeclockeventsareprogrammabletocontrolscenesthat

affect any Energi Savr Node unit connected on the QS link

without changing the local scene on the GRAFIK Eye QS

control unit.

• Astronomictimesareprogrammablebyintegralcity

database or by entering latitude and longitude. Sunrise/

Sunsettimesautomaticallyadjustthroughouttheyear

based on location.

• AutomaticallyadjustsforDaylightSavingTime(DST);DSTis

programmable.

• Localtimeclockeventscanactivateanyofthefollowingfeatures:

- Scenes 1 to 16 and Off

- Any available shade presets

- Start and End afterhours mode

- Enable and Disable daylighting for all zones/groups

- Enable and Disable occupancy for occupancy/vacancy

sensors

- Enable and Disable occupied events for all occupancy

sensors

Scene and Shade Buttons

• Large,roundedbuttonsareeasytouse.

• Backlitbuttonswithoptionalengravingmakeiteasyto

find and to operate the control unit in low light conditions

(backlight can be disabled).

• Optionalbuttonengravingisangleduptotheeyefor

easy reading.

• Predefinedlabelstickersareincludedforfieldlabeling.

• 4presetlightingscenes,plusOff,areaccessiblefromthe

front of the control unit.

• 12additionalscenesarestoredinthecontrolunitand

are accessible from the integral timeclock, seeTouch QS

wallstations, and QS interfaces.

• Lightlevelsfadesmoothlybetweenscenes.Fadetime

can be set differently for each scene: 0 to 59 seconds, or

1 to 60 minutes. Maximum fade time from Scene Off is

3 seconds.

Shade Control

• TheGRAFIKEyeQScontrolunitcanincludeupto

3 shade button columns. Each column has backlit

open, preset, close, and raise/lower buttons.

• Eachshadebuttoncolumncanbeprogrammedto

operate one shade or a group of shades. (Shades may

be assigned to more than one shade button column).

• Faceplatesareavailablewith1,2and3shadebutton

columns.

Wireless shade limitations:

• AccesstotheSivoiaQSWirelesselectronicdriveunit

(EDU) is required to associate shades with the GRAFIK

Eye QS control unit and set their raise/lower limits.

Exception: Sivoia QS Wireless cellular shades allow limit

setting from the GRAFIK Eye QS wireless control unit.

• Wiredandwirelessshadesmaynotbeprogrammedinto

the same shade button column; however, both may be

used on the same GRAFIK Eye QS control unit.

• Scenecommandsthataffectwirelessshadesacross

multiple shade button columns will have a 1-second

delay from column to column. This does not occur in

RadioRA 2 systems.

Specifications (continued)

Preset Dimming Controls

369314f 7 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Specifications (continued)

System Communications and Capacities

• Low-voltagetypeIECPELV/NEC® Class 2 wiring connects

control units, wallstations, motorized shades, and control

interfaces.

• AQSsystemcanhaveupto100devicesand100zones.

• AQSsystemcanhaveupto30wirelessdevices.

• Class1/Class2wiringconnectsballasttocontrolunit.

Infrared

• Infrared(IR)receiverallowsinfraredtransmitterstoselect

8 scenes, raise/lower lighting zones, or raise/lower

shades.

• Transmitterbuttonsimitatebuttonsonfaceplate.

• 50ft(15m)lineofsightrange.

• Terminalblockinfraredinputforconnectiontoawired

IR input from third-party equipment.

• IRcanbedisabledviaprogramming.

• WorkswithLutronGRX-ITandGRX-8ITinfraredremote

controls.

Accessory Controls: seeTouch QS Wallstations

(QSWS2)

• WiredseeTouchQSkeypadsprovidethefollowing

features:

- Access to one or more of the 16 scenes on the

GRAFIK Eye QS Wireless control unit

 -Zonetoggle,partitioning,sequencing,finetune,panic

mode, and timeclock enable/disable

- Contact closure inputs

- Various other functions that are available on specific

wallstation configurations. Refer to the seeTouch

specification submittal.

Wireless RF Compatibility

• Lutron’sproprietaryClearConnectRFTechnology

• Operatesinthe434MHzband

• CompatiblewithotherLutronwirelessproducts/systems,

such as:

- Pico wireless control (P/N PJ-)

- Radio Powr Savr occupancy/vacancy/daylight sensors

(P/N LRF2-)

- Sivoia QS wireless products

- Other GRAFIK Eye QS wireless control units

(P/N QSGRJ-)

Accessory Controls: Pico Wireless Control

(PJ models)

• ThePicoWirelessControlisbatterypowered.Itcancontrol

GRAFIK Eye QS wireless control units within a 30 ft

(10 m) range (60 ft/20 m in open air). It provides the

following features:

- Control of one or more zones on the GRAFIK Eye QS

Wireless control unit: turns zone(s) on or off, raises/lowers

zone(s), allows programmable light levels for each button,

and goes to user-programmable preset level

- Control of one or more scenes on the GRAFIK Eye QS

Wireless control unit: the Pico wireless control can access

any three sequential scenes (1 through 16), or any two

sequential scenes and Off; and can raise and lower

lighting levels.

Note: “Unaffected” is not a valid level for Pico zone

programming.

Accessory Controls: QS Sensor Module (QSM2)

• TheQSSensorModuleprovidesameanstolinkwired

or wireless occupancy sensors or daylight sensors, Pico

controls, and wired infrared sensors to a GRAFIK Eye QS

control unit via the wired QS link.

- Occupancy sensors wired (or wirelessly linked) to a QS

Sensor Module can be used by one or more GRAFIK Eye

QS control units on the wired link.

- Daylight sensors wired (or wirelessly linked) to a

QS Sensor Module can be used by one or more GRAFIK

Eye QS control units on the wired link.

- Pico wireless controls can control either one or more

zones or scenes on the GRAFIK Eye QS control unit.

- Pico wired controls can be used, when connected to

a QS Sensor Module, to control one or more zones or

scenes on the GRAFIK Eye QS control unit.

- Infrared sensors can control either one or more zones or

scenes on the GRAFIK Eye QS control unit. Functionality

varies; refer to the documentation for the QS Sensor

Module for details.

Preset Dimming Controls

369314f 8 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Accessory Controls: Contact Closure Input/Output

Interface (QSE-IO)

• Recallspresetlightlevelsforthefollowingsetofscenes

on the GRAFIK Eye QS control unit:

Scenes 1-4 and Off Scenes 9-12 and Off

Scenes 5-8 and Off Scenes 13-16 and Off

• Sequencescenes5-16,Enable/DisableZoneLockout,

Enable/Disable Scene Lockout, Enable/Disable Panic

Mode, Enable/Disable Timeclock.

• OccupancySensors.Anindividualinputcountsas

1occupancy sensor for the GRAFIK Eye QS control unit.

Each input can be assigned to either Scene Control or

ZoneControl(pleaserefertotheOccupancySensor(s)

section of this guide).

• ZoneToggle.Allowsaninputtotoggleoneormore

zones between programmable preset level(s) and off.

• ShadeOutputmode.AShadeColumnontheGRAFIK

Eye QS control unit can be linked to control outputs 1-3

and/or outputs 4-5 on the QSE-IO.

Accessory Controls:

DMX Output Interface (QSE-CI-DMX)

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

mappedtoanysingleDMX512Channel.

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

simultaneouslymappedtoanythreeDMX512channels

(providingRGB/CMYcontrol).

• DMXloadscannotbeusedwithdaylighting.

Accessory Controls: Ethernet and RS232 Interface

(QSE-CI-NWK-E)

• Allowsformonitoringandcontroloftheoutputsandlocal

scenes of the GRAFIK Eye QS control unit.

Accessory Controls: QS Keyswitch Wallstations

(QSWS2-KS)

• RecallspresetlightlevelsforanytwoscenesincludingOff

• Allowsfine-tuning(raise/lowerlevel)ofazoneorgroupof

zones

• Starts/Stopsscenesequencing(Scenes1-4or

Scenes 5-16)

• Enables/DisablesTimeclock

• Enables/Disablesoccupancysensors

• Enables/Disableddaylightsensors

• AllowstoggleofZone(s)toapresetlevelandoff

• Enables/Disablespanicmode

• Starts/Stopsafterhoursmode

EcoSystem Ballasts and Devices

• SupportsallHi-lumeand5-SeriesLEDdrivers(maximum64

per GRAFIK Eye control unit)

• SupportsallEcoSystemballasts(maximumof64ballasts

per GRAFIK Eye control unit)

• Supportsoccupancyanddaylightsensorswiredtoaballast

• DoesNOTsupportIRsensors(orIRkeypads)wiredtothe

ballast

Other Accessory Controls and Devices

• EnergiSavrNodeQS(ESN).RefertotheSpecification

Submittal for complete details.

Occupancy Sensor(s)

• TheGRAFIKEyeQScontrolunitworkswithoccupancy

sensors through either:

- Scene Control: Up to 16 sensors activate user-selected

occupancy and vacancy scenes.*

 -ZoneControl:uptofoursensorsperzoneactivate

user-selected occupancy and vacancy zone levels.

• Occupancysensorsmayinclude:

- Contact closure sensors wired to CCI input on back of

GRAFIK Eye QS control unit

- Wireless Radio Powr Savr occupancy or vacancy sensors

(model numbers starting with LRF2)

- Wired sensors connected to EcoSystem ballasts or

interfaces

- Wired or wireless sensors connected to a QS Sensor

Module (QSM)

• Ifanysensorinagroupdetectsoccupancy,thenthe

GRAFIK Eye QS control unit will go to the designated

occupancy scene or zone level.

• Ifallsensorsinagroupdetectvacancy,thenthe

GRAFIK Eye QS control unit will go to the designated

vacancy scene or zone level.

• Lowbattery:theDiagnosticsscreenwilldisplayalow

battery symbol when applicable.

• IftheGRAFIKEyeQScontrolunitdoesnotreceiveasignal

from an occupancy sensor on the link (usually due to a

dead battery), the lights associated with that sensor will go

to the occupied level.

Specifications (continued)

* Applicable only to units that ship with ﬁrmware version 9.002 and

higher. Previous versions support up to 4 sensors.

Preset Dimming Controls

369314f 9 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Daylight Sensor(s)

• TheGRAFIKEyeQScontrolunitwithEcoSystemworks

withcompatibledaylightsensorstoadjustelectriclight

levels based on measured daylight levels. Sensors can

be configured to control either GRAFIK Eye QS zones or

groups of EcoSystem loads independent of zoning.

• Daylightsensorsmayinclude:

- Wireless Radio Powr Savr (model numbers starting with

LRF2)

- Wired sensors connected to EcoSystem ballasts or

interfaces

- Wired or wireless sensors connected to a QS sensor

module (QSM)

• InZoneMode,adaylightsensorcancontroloneormore

GRAFIK Eye QS zones. Each zone can be calibrated to

target light levels.

- A zone can be controlled by no more than one daylight

sensor

• InGroupMode,adaylightsensorcancontroloneormore

EcoSystem loads, regardless of how they are zoned on

the GRAFIK Eye QS control unit.

- A group can be controlled by a single daylight sensor

- Each group can be calibrated to independent target light

levels

- Up to 16 groups are available

• Daylightcontrolcanbeenabledordisabledonascene-

by-scene basis

 -Bydefault,daylightcontrolisenabledinallscenes

Note: Daylight control through the GRAFIK Eye QS

control unit only affects select lighting loads. Shade

groups cannot be controlled by daylight sensors.

DaylightingdoesnotaffectDMXorRGB/CMYDMXloads.

DaylightingofRemoteZoneslinkedtoEnergiSavrNode

zones must be configured at the Energi Savr Node unit or

through the Energi Savr Node app for iPod.

Specifications (continued)

Contact Closure Input (CCI) with Power Supply Output

• EachGRAFIKEyeQScontrolunithasonecontactclosure

input (Terminal A).

- The attached device must provide a dry contact closure

or solid-state output.

- Input is miswire-protected up to 36 V-.

• Thecontactclosureiscapableofacceptingthefollowing

types of inputs:

- Maintained (default): The GRAFIK Eye QS control unit

will act on both a contact closure and a contact open/

release event.

- Momentary: The GRAFIK Eye QS control unit will act on

only contact closure events.

• EachGRAFIKEyeQScontrolunitcansupply

50mA maximum at 24 V-.

- Useful for powering occupancy sensors.

- An auxiliary power supply must be used if the device

requires more than 50 mA.

• TheCCIiscapableofoperatinginthefollowingmodes

- Occupancy: If an occupancy sensor is wired directly to

the GRAFIK Eye QS control unit.

- Emergency: This setting allows the GRAFIK Eye QS

control unit to work with a LUT-ELI. When an emergency

situation is detected, all lights will go to full on, and no

operations will be allowed until the emergency signal is

cleared.

- Afterhours: Allows the CCI to start and end the

afterhours mode.

- Timeclock: Allows the CCI to enable and disable the

timeclock.

- Scene Lockout: Prevents the user from making any

changes to the control unit. The current scene will stay

on until the CCI enables normal operation.

- Save Never: Prevents any changes from being saved

while the CCI is being used.

- Disable CCI: The CCI will have no effect on the system

and will not appear on the list of available sensors.

Security Lockout Password

• A4-digitpassword(usingcharactersAtoZand0to

9) can be enabled/disabled to lock out access to the

Programming Menu.

• BydefaultthereisnopasswordenabledontheGRAFIK

Eye QS control unit.

• Ifthe4-digitpasswordisforgotten,contactLutron

Technical Support to regain access.

iPod is a trademark of Apple Inc. registered in the U.S. and other

countries.

Preset Dimming Controls

369314f 10 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Remote Zone Mapping

• MapaGRAFIKEyeQSzonedirectlytoanEnergiSavr

Node output so that programmed scenes in the

GRAFIK Eye QS control unit will directly control the output

levels of the Energi Savr Node.

• Adjusthigh-endandlow-endtrimforremotezones

through the Energi Savr Node or Energi Savr app

software.

• Changeloadtypesofremotezonesthroughthe

Energi Savr Node or Energi Savr app software.

• Configuredaylightingforremotezonesthroughthe

Energi Savr Node or Energi Savr app software.

• Required:

- GRAFIK Eye QS control unit with firmware version 7.000

or higher

- Energi Savr Node unit with firmware version 6.000 or

higher

- Energi Savr app version 6.0.0 or higher (required only if

the Energi Savr Node unit has been configured using the

app)

Specifications (continued)

Partitioning

• Whenpartitionisopen,creatingonelargespace,

automatically combines lighting preset functions for

multiple GRAFIK Eye QS control units.

• Whenpartitionisclosed,creatingtwoormoresmaller

spaces, lighting preset functions become independent.

• RequiresoneQSWS2-2Bwallstation,aGRX-IRPSinfrared

transmitter/receiverpair,andaGRX-12VDCpowersupply

for operation.

• Ifoccupancysensorsarerequiredinapartitionedspace,

note that each room’s occupancy sensor(s) will operate

independent of the partition status.

Preset Dimming Controls

369314f 11 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

220 - 240 V~ 50 / 60 Hz 120 - 127 V~ 50 / 60 Hz

Unit Capacity (watts) 3000 2000

MLV 3000 VA / 2400 W 2000 VA / 1600 W

ZoneCapacity(watts) 40–1200 25–800

MLV 40–1200VA/40–960W 25–800VA/25–600W

Load Type Notes (Zones 1, 2 and 3)

• Allelectroniclow-voltage(ELV)lightingusedwithaninterfacemustberatedforreversephasecontroldimming.Before

installing an ELV light source, verify with the manufacturer that their transformer can be dimmed. When dimming, an

ELV interface (such as the PHPM-PA-DV-WH) must be used with the control unit.

• Notallzonesmustbeconnected;however,connectedzonesmusthaveaminimumloadasspecifiedabove.

• Maximumtotallightingloadforamagneticlow-voltage(MLV)variesbyinputvoltage:

- 120 - 127 V~: 800 VA / 600 W

- 220 - 240 V~: 1200 VA / 960 W

• MaximumtotallightingloadforLutronTu-WireandAdvanceMarkX® electronic dimming ballasts (120 to 127 V~ only)

must not exceed 6 A per zone or 16 A per unit.

• Nozonemaybeloadedwithmorethanthecapacityspecifiedabove.Forhigherwattageapplications,orfor277V~

applications,useLutronpowermodulePHPM-PA,PHPM-WBX,PHPM-PA-DV,PHPM-SW,orPHPM-WBX-DV.

• Forcontrollinglow-wattageloads(CFL,LED)inanon-dimapplication,contactLutronTechnicalSupportforthe

appropriate solution.

System Limits

• TheQSwiredcommunicationlinkislimitedto100devicesor100zones.

Capacities

Preset Dimming Controls

369314f 12 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

GRAFIK Eye QS Wireless with EcoSystem

Standard Model Numbers

See following pages for Ordering Custom (Non-Standard) Model Numbers

See Standard Color Combinations page for faceplate, stripe, and button colors

QSGRJ - _ E - _ _ WH

Prefix

Number

ofZones

6 = 6 zones

8 = 8 zones

16 = 16 zones

EcoSystem

Number

of Shade

Columns

Top Door

Color

Omit = White

T = Translucent

White

(standard

color)

Example:

QSGRJ-6E-1TWH

6-zone standard white unit with

1 shade column and translucent

top door.

Unit will ship unengraved

with engraving certificate that

customer can redeem at no

charge.

Important Note:

For any non-standard units, you must order BOTH

a base unit and a Faceplate Kit.

Please see the Custom Ordering Information on the following pages.

6Zones

QSGRJ-6E-WH

QSGRJ-6E-TWH

QSGRJ-6E-1WH

QSGRJ-6E-1TWH

8Zones

QSGRJ-8E-WH

QSGRJ-8E-TWH

QSGRJ-8E-1WH

QSGRJ-8E-1TWH

16Zones

QSGRJ-16E-WH

QSGRJ-16E-TWH

QSGRJ-16E-1WH

QSGRJ-16E-1TWH

Available Standard Model Numbers

Omit = none

1 = 1 shade

column

Preset Dimming Controls

369314f 13 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

GRAFIK Eye QS Wireless with EcoSystem

Custom Color Options and Model Numbers

You must order a Base Unit and a Faceplate Kit

See Standard Color Combinations page for faceplate, stripe, and button colors

QSGFP - -

Faceplate

Prefix

Color/

Finish

Number

of Shade

Columns

Omit = none

1 = 1 column

2 = 2 columns

3 = 3 columns

Architectural Matte

Finishes

Standard

(ship in 48 hours)

White WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Architectural Metal

Finishes

BrightBrass BB

BrightChrome BC

BrightNickel BN

SatinBrass SB

Satin Chrome SC

Satin Nickel SN

AntiqueBrass QB

AntiqueBronze QZ

Anodized Aluminum

Finishes

Clear CLA

Black BLA

Brass BRA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Midnight MN

Limestone LS

Stone ST

Desert Stone DS

Terracotta TC

Hot HT

Goldstone GS

Palladium PD

Plum PL

Turquoise TQ

Bluestone BG

Sea Glass SG

Greenbriar GB

Sienna SI

Merlot MR

Mocha Stone MS

Top

Door

Color

Faceplate Kit

(includes coordinating stripe and buttons)

Faceplate Custom Color/Finish Codes

Keypad

Engraving

Code

Keypad Engraving Codes

Omit = Unengraved

Ships with engraving certificate that

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

for custom engraving forms. Submit

completed form with order, and unit will

ship engraved as specified by customer.

Omit = same as

unit

T = Translucent

Base Unit

QSGRJ - _ E

Prefix

Number

ofZones

6 = 6 zones

8 = 8 zones

16 = 16 zones

EcoSystem

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Example:

QSGRJ-6E

6-zone base unit

and

QSGFP-2IV-EGN

Ivory faceplate kit with two

shade columns and general

engraving

Preset Dimming Controls

369314f 14 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

QSGB - 5B - WH -

CustomButton

Kit Prefix

Keypad

Engraving

Code

Button

Configuration

3BRL=3-buttonwith

raise/lower

(shade column)

5B=5-button

(lighting keypad)

Button

Color/

Finish

GRAFIK Eye QS Wireless with EcoSystem

Custom Options and Model Numbers

See previous pages for Standard and Other Custom Model Numbers

See Standard Color Combinations page for faceplate, stripe, and button colors

Custom Button Kit

Button Kit Custom

Color/Finish Codes

Architectural Matte

Finishes

White WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Custom Stripe Kit

QSGS - WH

Stripe

Kit

Prefix

Stripe Color/

Finish

Stripe Custom Color/Finish Codes

Same as Faceplate colors on previous page

Keypad Engraving Codes

Omit = Unengraved

Ships with engraving certificate that

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

for custom engraving forms. Submit

completed form with order, and unit will

ship engraved as specified by customer.

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Preset Dimming Controls

369314f 15 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

GRAFIK Eye QS Wireless with EcoSystem

Standard Color Combinations

See previous pages for Standard and Custom Model Numbers

Suffix Faceplate (F) Stripe (S) Button (B)

Architectural Matte

WH White Gray White

IV Ivory Beige Ivory

BE Beige Ivory Beige

GR Gray Black Gray

BR Brown Black Brown

BL Black Gray Black

AL Almond Light Almond Almond

LA Light Almond Almond Light Almond

Architectural Metal

BB BrightBrass Black Black

BC BrightChrome Black Black

BN BrightNickel Black Black

SB SatinBrass Black Black

SC SatinChrome Black Black

SN SatinNickel Black Black

QB AntiqueBrass Black Black

QZ AntiqueBronze Black Black

Anodized

CLA Clear Black Black

BLA Black Black Black

BRA Brass Black Black

Suffix Faceplate (F) Stripe (S) Button (B)

Satin Matte

MN Midnight Gray Black

TP Taupe Gray Taupe

SW Snow Gray Snow

ES Eggshell Beige Eggshell

BI Biscuit Eggshell Biscuit

LS Limestone Gray Gray

ST Stone Gray Gray

DS Desert Stone Taupe Taupe

TC Terracotta Taupe Taupe

BG Bluestone Gray Gray

HT Hot Taupe Taupe

MR Merlot Taupe Taupe

SI Sienna Brown Brown

GB Greenbriar Gray Gray

SG Sea Glass Gray Gray

MS Mocha Stone Taupe Taupe

GS Goldstone Ivory Ivory

PD Palladium Gray Gray

PL Plum Taupe Taupe

TQ Turquoise Gray Gray

LUTRON

Off

Preset

Open

F (faceplate)

B(buttons)

S (stripe)

Faceplate is comprised of a top and bottom.

The bottom will always be the color indicated

under “faceplate.” The top may be the

same color or translucent. Use the chart for

faceplates that have the same color top and

bottom. If a translucent lid is chosen, the

stripe will automatically be the same color as

the bottom lid.

Example:

If you order QSGRJ-6E-1WH, your GRAFIK

Eye QS with 6 lighting zones and 1 shade

column will come with a white faceplate

(both top and bottom), gray stripe, and white

buttons.

Preset Dimming Controls

369314f 16 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

EcoSystem bus (E1, E2)

Overview

Load wiring

Communication link

Occupancy sensor/contact closure input

and 24 V

- power

IR input

Terminations

Maximum EcoSystem

Wire Gauge Bus Length

12 AWG (4.0 mm

) 2200 ft (671 m)

14 AWG (2.5 mm

) 1400 ft (427 m)

16 AWG (1.5 mm

) 900 ft (275 m)

18 AWG (1.0 mm

) 570 ft (175 m)

Preset Dimming Controls

369314f 17 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Power Group Wiring Example

On the QS link, there are devices that supply power and devices that consume power. Each device has a specific

number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that

supplies power and one or more devices that consume power; each Power Group may have only one power-supplying

device. Refer to the Power Draw Units on the QS Link Spec (369405) on www.lutron.com for more information

concerning PDUs.

Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.

BetweendevicesontheQSlinkthatsupplypower,connectonlyterminals1,3,and4(NOTterminal2),shownbythe

letterBonthediagram.

Wiring can be T-tapped or daisy-chained.

LUTRON

LUTRON LUTRON

LUTRON

Power Group 1

Power Group 2

Power Group 3

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

Connect all 4

terminals within a

power group:

1: Common

2: 24 V-

3 and 4: Data

Connect only 3

terminals between

power groups:

1: Common

3 and 4: Data

Do not connect

Terminal 2: 24 V-

GRAFIK Eye QS

control unit

Supplies PDUs

QS Power Supply

Supplies PDUs

Energi Savr Node QS unit

Supplies PDUs

Control Interfaces

Consume PDUs

Control Interfaces

Consume PDUs

Quantum processor

Supplies PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

QS Sensor Module with

wired Occupancy Sensor

Consumes PDUs

Wireless Occupancy Sensor

does not consume PDUs

Preset Dimming Controls

369314f 18 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Line Voltage Wiring

Distribution Panel

1234

ABC

123456LN

To Load 1

To Load 2

To Load 3

Rear of

QS control unit

• Pullpowerwiringfromdistributionpanelandtolightfixtures.

• Eachlinevoltageterminalcanacceptone12AWG(4.0mm

) wire.

• ConsultLutronfornon-dimrelaywiringand/orloadsideemergencytransferwiring.

Line voltage (hot/live)

is labeled L.

120-127 V~

220-240 V~

Do not use

}

Loads 1, 2, 3,

120-127 V~

220-240 V~

Preset Dimming Controls

369314f 19 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

LUTRON

EcoSystem Bus Wiring

GRAFIK Eye QS

with EcoSystem

(limit one per

EcoSystem link)

EcoSystem Hi-Lume

Premier 0.1% with

Soft-on, Fade-to-

Black

EcoSystem Hi-Lume

1% with Soft-on,

Fade-to-BlackLED

Driver

EcoSystem Hi-Lume

1% with Soft-on,

Fade-to-BlackLED

Driver

Wireless Pico

Remote

Radio Powr

Savr Wireless

Daylight

Sensor

Radio Powr

Savr Wireless

Occupancy

Sensor

1234

ABC

123456LN

EcoSystem Bus Link Terminal Detail

EcoSystem

ballasts

To additional EcoSystem

ballasts

EcoSystem Bus Wiring Example

Preset Dimming Controls

369314f 20 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

IEC PELV/NEC® Class 2 QS System Wiring

• Wiringcanbedaisy-chainedorT-tapped.

• Wiringmustberunseparatelyfromline/mainsvoltage.

• Totallengthofcontrollinkmustnotexceed2000ft(610m).

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

seeTouch QS

wallstations

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

Daisy-Chain Wiring Example

T-Tap Wiring Example

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

Sivoia QS

smart panel

Sivoia QS

smart panel

seeTouch QS

wallstations

Wire Sizes (check compatibility in your area)

QS Link Wiring Length Wire Gauge Lutron Cable Part Number

Less than 500 ft (153 m) Power (terminals 1 and 2)

1 pair 18 AWG (1.0 mm

) GRX-CBL-346S(non-plenum)

GRX-PCBL-346S(plenum)

Data (terminals 3 and 4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

500 to 2000 ft

(153 to 610 m)

Power (terminals 1 and 2)

1 pair 12 AWG (4.0 mm

) GRX-CBL-46L(non-plenum)

GRX-PCBL-46L(plenum)

Data (terminals 3 and 4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

Preset Dimming Controls

369314f 21 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Wireless Control Unit with EcoSystem

Mounting

Fits into a 4-gang

U.S. backbox,

3` in (90.4 mm) deep

(Lutron P/N 245-254)

3 in (76.2 mm) deep

(Lutron P/N 241-400)

Mounting

screws (4)

GRAFIK Eye

QS with

EcoSystem

control unit

Hinged

bottom lid

Hinged

top lid

)Lutron, Lutron, GRAFIK Eye, Sivoia, Pico, Quantum, seeTouch, Clear Connect, Hi-lume, Softswitch, RTISS Equipped, Tu-Wire, and EcoSystem are trademarks of Lutron

Electronics Co., Inc., registered in the U.S. and other countries.

Radio Powr Savr, Energi Savr Node, and RadioRA2 are trademarks of Lutron Electronics Co., Inc.

NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.

UL is a trademark of UL LLC.

AdvanceandMarkXareregisteredtrademarksofPhilipsElectronicsNorthAmericaCorporation.

Fill Online, Printable, Fillable, Blank 369314 GRAFIK Eye QS Wireless Control Unit with EcoSystem SPEC (369314) Form

Related forms

Fillable 369314 GRAFIK Eye QS Wireless Control Unit with EcoSystem SPEC (369314)

Fill Online, Printable, Fillable, Blank 369314 GRAFIK Eye QS Wireless Control Unit with EcoSystem SPEC (369314) Form

Related forms

First 20 documents completely FREE!