Fill - Free fillable 369310 GRAFIK Eye QS Control Unit with EcoSystem SPEC (369310) PDF form

Preset Dimming Controls

369310e 1 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

GRAFIK Eye QS Control Unit with EcoSystem

LUTRON

Off

Preset

Open

Description

GRAFIK Eye QS with EcoSystem is the premier energy-

saving lighting and shade control. The GRAFIK Eye QS

control unit features an astronomic timeclock and intuitive

lighting presets, which are seamlessly integrated with

EcoSystem fluorescent ballasts and LED drivers, and

Lutron’s QS components and systems. Additionally, the

GRAFIK Eye QS with EcoSystem control unit is compatible

with all Lutron wired QS products and systems, including

Quantum.

Application Suggestions and Differences between GRAFIK Eye QS with EcoSystem Control Unit

and Energi Savr Node with EcoSystem Unit

GRAFIK EyeQS with EcoSystem

LUTRON

Energi Savr Node (ESN)

with EcoSystem

Suggested/Recommended Applications Single rooms, partitioned spaces,

e.g., conference room, classroom,

ballroom, lobby

Open spaces, multiple

enclosed rooms, e.g., open

office, window offices

Programming Method Info Screen on the QS control unit Via Energi Savr Node App for

iPod mobile digital device

Integral Timeclock Yes Yes (using a QS Timeclock or

contact closure interface)

Compatible with seeTouch QS Keypads Yes Yes

Compatible with EcoSystem Wall Controls No Yes

Compatible with EcoSystem IR Sensors No Yes

Includes dry contact closure for integration to BMS

or Security Systems

Yes Yes

Input Voltage 120-127 or 220-240 V~ 50/60 Hz 120/240/277 V~ 50/60 Hz

Number of EcoSystem Busses 1 1 or 2

Number of Zones 6, 8, or 16 Programmable (maximum 100)

Number of Line-Voltage Outputs 3 (Zones 1-3 only) --

Compatible with other QS Devices Yes Yes

Preset Dimming Controls

369310e 2 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Mechanical Dimensions

4$ in

(119 mm)

94 in

(239 mm)

4 in

(10 mm)

2 in

(51 mm)

Front View Side View

Fits into a 4-gang U.S. backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or

3 in (76.2 mm) deep (Lutron P/N 241-400)

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

Example of Wired System

QSE-CI-NWK-E

Sivoia QS

shade

seeTouch QS

seeTouch

Wired

occupancy

sensor

GRAFIK Eye QS

wireless

GRAFIK Eye QS

wireless

Wired QS link

Quantum

(optional)

QS Sensor

Module

Energi Savr

Node

EcoSystem

ballast

System Topology

Preset Dimming Controls

369310e 3 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Features

• Pushbuttonrecalloffourpresetlightingscenes,plus

Off.

• Sixteen(16)totalavailablescenes,plusOffscene.

• Zones1,2,and3cancontrolmanylightsource

types directly or through power modules.

• Optionalintegratedshadecontrolbuttons,which

can also be added to the unit after installation.

• Masteroverridebuttonstoraiseandloweralllights.

• Allowssetupoflightingscenesandshadepresets

using buttons on the control unit.

• Built-ininfrared(IR)receiver.

• ExternalIRconnection.

• Built-inastronomictimeclock.

• Infoscreenshowszonelightlevelpercentage,

energysavings,zonelabeling,programming,and

EcoSystem setup.

• Lockoutoptionpreventsaccidentalchanges.

• Occupancysensorinputand24V- power for one

occupancy sensor.

• QScommunicationlinkforseamlessintegrationof

lights,motorizedwindowtreatments,occupancy

sensors, wallstations, and integration interfaces.

• CompatiblewithallLutronQSsystemcomponents.

• Controlupto6,8,or16EcoSystemzonesfrom

internal bus supply.

• Zones1,2,and3areintegrallinevoltagedimming

zonesandcanbeoptionallyprogrammedas

EcoSystemzones.

• Upto64EcoSystemorHi-lume3Dballastscanbe

addressedandgroupedtozones.

• IntegralEcoSystemsetupandprogrammingthrough

the info screen.

• Backlitbuttonswithengravingmakeuniteasyto

locate and operate.

• Availableinavarietyofcolorsandfinishes.

LUTRON

1 2 3 4 5 6

Optional

shade

control

keypad

Zone

control

Infrared

receiver

USB

type

miniB

Info

screen

Lighting

control

keypad

Off

Preset

Open

Preset

Open

Note: General Engraving (-EGN) shown.

Preset Dimming Controls

369310e 4 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

 Zones1,2,and3canalsocontrolthefollowinglighting

sources with a smooth, continuous square law dimming

curve or on a full conduction non-dim basis through

separate Lutron power modules:

• Electroniclow-voltagetransformers(useELVor

Phase-Adaptive power module)

• Lutron3-wirecontrolledelectronicfluorescentdimming

ballasts (use fluorescent 3-wire power module)

• Lutron3-wirecontrolledLEDdrivers(useflourescent3-wire

power module)

• Non-dim(useswitchingmodule)

• 0–10V(useTVI)

Note:Azonemaybeprogrammedtocontrolonlyoneload

type at a time.

Key Design Features

• LightningstrikeprotectionmeetsANSI/IEEEstandard

62.41-1980. Can withstand voltage surges of up to

6000 V~ and current surges of up to 3000 A.

• Testedtowithstand16kVelectrostaticdischargewithout

damage or memory loss.

• RTISS-equipped:Compensatesinrealtimeforincomingline

voltage variations (no visible flicker with +/-2% change in

RMSvoltagepercycle,and+/-2%Hzchangeinfrequency

per second).

• Powerfailurememoryretainsprogrammingandlightlevel

settings for up to 10 years in the event of a power loss.

• TheGRAFIKEyeQSsupplies3PowerDrawUnits(PDUs)

on the QS link.

For complete information, see the Power Draw Units on

the QS Link Spec (369405) on www.lutron.com

• Faceplateishingedatthetopandbottom,andstaysopen

at 180° for ease of access.

• Directcontrolof120V~ and 277 V~ EcoSystem,

Hi-lume3D,andHi-lumeLEDballasts(nointerface

required).

Input Power

• 120– 127 V~50/60Hz

• 220– 240 V~50/60Hz

Listings (120 – 127 V~)

• UL

• CSA

• NOM

• CEC(Title24)

Environment

• 32to104°F(0to40°C).

• Relativehumiditylessthan90%non-condensing.

Lighting Sources/Load Types

AllZones

• EcoSystemandHi-lume3Dballasts,andHi-lumeLED

drivers directly wired to integral EcoSystem digital link

•Beforesystemisaddressed,Zone4willtransmit

broadcast commands to all EcoSystem loads wired to

the GRAFIK Eye QS.

• ZonesonEnergiSavrNodeproductswiredtothesame

QS link

 –ZonesonEnergiSavrNodewithSoftswitch

 –ZonesonEnergiSavrNodefor0-10V

 –ZonesonEnergiSavrNodewithEcoSystem

Pleasereferto“RemoteZoneMapping”forimportant

information.

• DMXchannel(s)throughDMXoutputinterface

(QSE-CI-DMX).Pleasereferto“AccessoryControls:DMX

OutputInterface”

Zones1,2,and3canalsocontrolthefollowinglighting

sources with a smooth, continuous square law dimming

curve or on a full conduction non-dim basis:

• Incandescent

• Halogen

• Magneticlow-voltagetransformer

• LutronTu-Wireelectronicfluorescentdimmingballast

• LutronHi-lume2-wireLTELEDdriver

• AdvanceMarkXR electronic dimming ballast

• Neonandcoldcathode

• Non-dim(incandescent,magneticlow-voltage,Tu-Wire,

or neon/cold cathode)

• CreeLR4/6,120V~ fixtures (for loading capacities,

please refer to the LED report card located at

www.lutron.com/LEDtool)

 Pleasereferto“Capacities”formoreinformation.

Specifications

Preset Dimming Controls

369310e 5 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Info Screen

• OLED(organicLED)screenisviewablefromallangles.

• Screenturnsoffwhenidlefor30seconds.

• Programmablezonelabels.

• Programmablescenelabels.

• Statusofreal-timezonepercentageandenergysavings.

• Programmabletimeclockschedules.

• Programmableshadelabels.

• Selectabledisplaylanguages:

–English –Spanish –French

–Italian –German –Portuguese

Astronomic Timeclock

• Integraltoallunits.

• 7dailyschedulesavailable.

• Oneavailableholidayscheduleisprogrammablebydateup

to one year in advance.

• 25eventsperdaymaximum.

• Timeclockeventsareprogrammabletocontrolscenesthat

affect any Energi Savr Node QS unit connected on the QS

link without changing the local scene on the GRAFIK Eye

QS control unit.

• Astronomictimesareprogrammablebyintegralcity

database or by entering latitude and longitude. Sunrise/

Sunset times automatically adjust throughout the year

based on location.

• AutomaticallyadjustsforDaylightSavingTime(DST);DSTis

programmable.

• Localtimeclockeventscanactivateanyofthefollowing

features:

 –Scenes1to16andOff

 –Anyavailableshadepresets

 –StartandEndafterhoursmode

 –EnableandDisabledaylightingforallzones/groups

 –EnableandDisableoccupancyforoccupancy/vacancy

sensors

 –EnableandDisableoccupiedeventsforalloccupancy

sensors

System Communications and Capacities

• Low-voltagetypeIECPELV/NECR Class 2 wiring connects

controlunits,wallstations,motorizedshades,andcontrol

interfaces.

• AQSsystemcanhaveupto100devicesand100zones.

• Class1/Class2wiringconnectsballasttocontrolunit.

Scene and Shade Buttons

• Large,roundedbuttonsareeasytouse.

• Backlitbuttonswithoptionalengravingmakeiteasyto

find and to operate the control unit in low light conditions

(backlight can be disabled).

• Optionalbuttonengravingisangleduptotheeyefor

easy reading.

• Predefinedlabelstickersareincludedforfieldlabeling.

• 4presetlightingscenes,plusOff,areaccessiblefromthe

front of the control unit.

• 12additionalscenesarestoredinthecontrolunitand

are accessible from the integral timeclock, seeTouch QS

wallstations, and QS interfaces.

• Lightlevelsfadesmoothlybetweenscenes.Fadetime

can be set differently for each scene: 0 to 59 seconds, or

1 to 60 minutes. Maximum fade time from Scene Off is 3

seconds.

Shade Control

• TheGRAFIKEyeQScontrolunitcanincludeupto3

shade button columns. Each column has backlit open,

preset, close, and raise/lower buttons.

• Eachshadebuttoncolumncanbeprogrammedto

operate one shade or a group of shades. (Shades may

be assigned to more than one shade button column).

• Faceplatesareavailablewith1,2and3shadebutton

columns.

Zone Control

• Eachzonehasadedicatedraiseandlowerbuttonto

adjustthezone.

• Eachzonehasadedicated7LEDbargraphforlevel

status. Percentage of light level and energy saved is

displayed on the info screen.

• AllzoneinformationhasbluebacklitLEDs.Backlight

turns off when idle for 30 seconds.

• High-endandlow-endtrimsettingsareadjustableper

zone(highendfrom99to55%;lowendfrom45to1%).

Note:Trimforremotezonesmustbeadjustedlocallyon

the Energi Savr Node unit.

• Eachzoneisprogrammabletoonlyoneloadtypeata

time.

Specifications

Preset Dimming Controls

369310e 6 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Specifications

Infrared

• Infrared(IR)receiverallowsinfraredtransmitterstoselect

8scenes,raise/lowerlightingzones,orraise/lower

shades.

• Transmitterbuttonsimitatebuttonsonfaceplate.

• 50ft(15m)lineofsightrange.

• Terminalblockinfraredinputforconnectiontoawired

IR input from third-party equipment.

• IRcanbedisabledviaprogramming.

• WorkswithLutronGRX-ITandGRX-8ITinfraredremote

controls.

Accessory Controls: seeTouch QS Wallstations

(QSWS2)

• WiredseeTouchQSkeypadsprovidethefollowing

features:

 –Accesstooneormoreofthe16scenesonthe

GRAFIK Eye QS control unit

 –Zonetoggle,partitioning,sequencing,finetune,panic

mode, and timeclock enable/disable

 –Contactclosureinputs

 –Variousotherfunctionsthatareavailableonspecific

wallstation configurations. Refer to the seeTouch

specification submittal (P/N ??).

Accessory Controls: QS Sensor Module (QSM2)

• TheQSSensorModuleprovidesameanstolinkwired

or wireless occupancy sensors or daylight sensors, Pico

controls, and wired infrared sensors to a GRAFIK Eye QS

control unit via the wired QS link.

 –Occupancysensorswired(orwirelesslylinked)to

a QS Sensor Module can be used by one or more

GRAFIK Eye QS control units on the wired link.

 –Daylightsensorswired(orwirelesslylinked)toa

QS Sensor Module can be used by one or more

GRAFIK Eye QS control units on the wired link.

 –Infraredsensorscancontroleitheroneormorezonesor

scenes on the GRAFIK Eye QS control unit. Functionality

varies;refertothedocumentationfortheQSSensor

Module for details.

 –Picowirelesscontrolscancontroleitheroneormore

zonesorscenesontheGRAFIKEyeQScontrolunit.

 –Picowiredcontrolscanbeused,whenconnectedto

aQSSensorModule,tocontroloneormorezonesor

scenes on the GRAFIK Eye QS control unit.

Accessory Controls: Contact Closure Input/Output

Interface (QSE-IO)

• Recallspresetlightlevelsforthefollowingsetofscenes

on the GRAFIK Eye QS control unit:

Scenes 1-4 and Off Scenes 9-12 and Off

Scenes 5-8 and Off Scenes 13-16 and Off

• Sequencescenes5-16,Enable/DisableZoneLockout,

Enable/Disable Scene Lockout, Enable/Disable Panic

Mode, Enable/Disable Timeclock.

• OccupancySensors.Anindividualinputcountsas1

occupancy sensor for the GRAFIK Eye QS control unit.

Each input can be assigned to either Scene Control or

ZoneControl(pleaserefertotheOccupancySensor(s)

section of this guide).

• ZoneToggle.Allowsaninputtotoggleoneormorezones

between programmable preset level(s) and off.

• ShadeOutputmode.AShadeColumnonthe

GRAFIK Eye QS control unit can be linked to control

outputs 1-3 and/or outputs 4-5 on the QSE-IO.

Accessory Controls:

DMX Output Interface (QSE-CI-DMX)

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

mappedtoanysingleDMX512Channel.

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

simultaneouslymappedtoanythreeDMX512channels

(providingRGB/CMYcontrol).

• DMXloadscannotbeusedwithdaylighting.

Accessory Controls: Ethernet and RS232 Interface

(QSE-CI-NWK-E)

• Allowsformonitoringandcontroloftheoutputsandlocal

scenes of the GRAFIK Eye QS control unit.

Accessory Controls: QS Keyswitch Wallstations

(QSWS2-KS)

• Recallspresetlightlevelsforanytwoscenesincluding

Off.

• Allowsfine-tuning(raise/lowerlevel)ofazoneorgroupof

zones.

• Starts/Stopsscenesequencing(Scenes1-4orScenes

5-16)

• Enables/DisablesTimeclock

• Enables/Disablesoccupancysensors

• Enables/Disableddaylightsensors

• AllowstoggleofZone(s)toapresetlevelandoff.

• Enables/Disablespanicmode.

• Starts/Stopsafterhoursmode.

Preset Dimming Controls

369310e 7 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Specifications

EcoSystem Ballasts and Devices

• SupportsallEcoSystemballasts(maximumof64ballasts

per GRAFIK Eye control unit)

• Supportsoccupancyanddaylightsensorswiredtoa

ballast

• DoesNOTsupportIRsensors(orIRkeypads)wiredto

the ballast

Other Accessory Controls and Devices

• EnergiSavrNode QS (ESN). See the Specification

Submittal for complete details.

Occupancy Sensor(s)

• TheGRAFIKEyeQScontrolunitworkswithoccupancy

sensors through either:

- Scene Control: Up to 16 sensors activate user-selected

occupancy and vacancy scenes.*

 -ZoneControl:Uptofoursensorsperzoneactivate

user-selectedoccupancyandvacancyzonelevels.

• Occupancysensorsmayinclude:

- Contact closure sensors wired to CCI input on back of

GRAFIK Eye QS control unit

- Wired or wireless sensors connected QS Sensor Module

(QSM)

• Ifanysensorinagroupdetectsoccupancy,thenthe

GRAFIK Eye QS control unit will go to the designated

occupancysceneorzonelevel.

• Ifallsensorsinagroupdetectvacancy,thenthe

GRAFIK Eye QS control unit will go to the designated

vacancysceneorzonelevel.

• Lowbattery:theDiagnosticsscreenwilldisplayalow

battery symbol when applicable.

• IftheGRAFIKEyeQScontrolunitdoesnotreceivea

signal from an occupancy sensor on the link (usually due

to a dead battery), the lights associated with that sensor

will go to the occupied level.

Daylight Sensor(s)

• TheGRAFIKEyeQSwithEcoSystemcontrolunitworks

with compatible daylight sensors to adjust electric light

levels based on measured daylight levels. Sensors can

beconfiguredtocontroleitherGRAFIKEyeQSzonesor

groupsofEcoSystemloadsindependentofzoning.

• Daylightsensorsmayinclude:

 –WiredsensorsconnectedtoEcoSystem ballasts or

interfaces

 –WiredorwirelesssensorsconnectedtoaQSsensor

module (QSM)

• InZoneMode,adaylightsensorcancontroloneormore

GRAFIKEyeQSzones.Eachzonecanbecalibratedto

target light levels.

 –Azonecanbecontrolledbynomorethanonedaylight

sensor

• InGroupMode,adaylightsensorcancontroloneormore

EcoSystemloads,regardlessofhowtheyarezonedonthe

GRAFIK Eye QS control unit.

 –Agroupcanbecontrolledbyasingledaylightsensor

 –Eachgroupcanbecalibratedtoindependenttargetlight

levels

 –Upto16groupsareavailable

• Daylightcontrolcanbeenabledordisabledona

scene-by-scene basis

 –Bydefault,daylightcontrolisenabledinallscenes

Note: Daylight control through the GRAFIK Eye QS control

unit only affects select lighting loads. Shade groups cannot

be controlled by daylight sensors. Daylighting does not

affectDMXorRGB/CMYDMXloads.

DaylightingofRemoteZoneslinkedtoEnergiSavrNode

zonesmustbeconfiguredattheEnergiSavrNodeunitor

through the Energi Savr Node app for iPod.

* Applicable only to units that ship with ﬁrmware version 9.002 and higher. Previous versions support up to 4 sensors.

Preset Dimming Controls

369310e 8 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Contact Closure Input (CCI) with Power Supply Output

• EachGRAFIKEyeQScontrolunithasonecontactclosure

input (Terminal A).

 –Theattacheddevicemustprovideadrycontactclosure

or solid-state output.

 –Inputismiswire-protectedupto36V-.

• Thecontactclosureiscapableofacceptingthefollowing

types of inputs:

 –Maintained(default):TheGRAFIKEyeQScontrolunit

will act on both a contact closure and a contact open/

release event.

 –Momentary:TheGRAFIKEyeQScontrolunitwillacton

only contact closure events.

• EachGRAFIKEyeQScontrolunitcansupply50

mA maximum at 24 V-.

 –Usefulforpoweringoccupancysensors.

 –Anauxiliarypowersupplymustbeusedifthedevice

requires more than 50 mA.

• TheCCIiscapableofoperatinginthefollowingmodes

 –Occupancy:Ifanoccupancysensoriswireddirectlyto

the GRAFIK Eye QS control unit.

 –Emergency:ThissettingallowstheGRAFIKEyeQS

control unit to work with a LUT-ELI. When an emergency

situation is detected, all lights will go to full on, and no

operations will be allowed until the emergency signal is

cleared.

 –Afterhours:AllowstheCCItostartandendthe

afterhours mode.

 –Timeclock:AllowstheCCItoenableanddisablethe

timeclock.

 –SceneLockout:Preventstheuserfrommakingany

changes to the control unit. The current scene will stay

on until the CCI enables normal operation.

 –SaveNever:Preventsanychangesfrombeingsaved

while the CCI is being used.

 –DisableCCI:TheCCIwillhavenoeffectonthesystem

and will not appear on the list of available sensors.

Security Lockout Password

• A4-digitpassword(usingcharactersAtoZand0to

9) can be enabled/disabled to lock out access to the

Programming Menu.

• BydefaultthereisnopasswordenabledontheGRAFIK

Eye QS control unit.

• Ifcasethe4-digitpasswordisforgotten,contactLutron

Customer Assistance to regain access.

Specifications

Remote Zone Mapping

• MapaGRAFIKEyeQSzonedirectlytoanEnergiSavrNode

output so that programmed scenes in the GRAFIK Eye QS

control unit will directly control the output levels of the Energi

Savr Node.

• Adjusthigh-endandlow-endtrimforremotezonesthrough

the Energi Savr Node or Energi Savr app software.

• ChangeloadtypesofremotezonesthroughtheEnergiSavr

Node or Energi Savr app software.

• ConfiguredaylightingforremotezonesthroughtheEnergi

Savr Node or Energi Savr app software.

• Required:

 –GRAFIKEyeQScontrolunitwithfirmwareversion7.000

or higher

 –EnergiSavrNodeunitwithfirmwareversion6.000or

higher

 –EnergiSavrappversion6.0.0orhigher(requiredonlyifthe

Energi Savr Node unit has been configured using the app)

Partitioning

• Whenpartitionisopen,creatingonelargespace,

automatically combines lighting preset functions for multiple

GRAFIK Eye QS control units.

• Whenpartitionisclosed,creatingtwoormoresmaller

spaces, lighting preset functions become independent.

• RequiresoneQSWS2-2Bwallstation,aGRX-IRPSinfrared

transmitter/receiverpair,andaGRX-12VDCpowersupply

for operation.

• Ifoccupancysensorsarerequiredinapartitionedspace,

note that each room’s occupancy sensor(s) will operate

independent of the partition status.

Preset Dimming Controls

369310e 9 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

220 – 240 V~ 50 / 60 Hz 120 – 127 V~ 50 / 60 Hz

Unit Capacity (watts) 3000 2000

MLV 3000 VA / 2400 W 2000 VA / 1600 W

ZoneCapacity(watts) 40–1200 2–800

MLV 40–1200VA/40–960W 25–800VA/25–600W

Load Type Notes (Zones 1, 2 and 3)

• Allelectroniclow-voltage(ELV)lightingusedwithaninterfacemustberatedforreversephasecontroldimming.Before

installing an ELV light source, verify with the manufacturer that their transformer can be dimmed. When dimming, an ELV

interface(suchasthePHPM-PA-DV-WH)mustbeusedwiththecontrolunit.

• Notallzonesmustbeconnected;however,connectedzonesmusthaveaminimumloadasspecifiedabove.

• Maximumtotallightingloadforamagneticlow-voltage(MLV)variesbyinputvoltage:

– 120– 127 V~: 800 VA / 600 W

– 220– 240 V~: 1200 VA / 960 W

• MaximumtotallightingloadforLutronTu-WireandAdvanceMarkXR electronic dimming ballasts (120 to 127 V~ only)

mustnotexceed6Aperzoneor16Aperunit.

• Nozonemaybeloadedwithmorethanthecapacityspecifiedabove.Forhigherwattageapplications,orfor277V~

applications,useLutronpowermodulePHPM-PA,PHPM-WBX,PHPM-PA-DV,PHPM-SW,orPHPM-WBX-DV.

• Forcontrollinglow-wattageloads(CFL,LED)inanon-dimapplication,contactLutronTechnicalSupportforthe

appropriate solution.

System Limits

• TheQSwiredcommunicationlinkislimitedto100devicesor100zones.

Capacities

Preset Dimming Controls

369310e 10 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

GRAFIK Eye QS with EcoSystem Control Unit

Custom Color Options and Model Numbers

You must order a Base Unit and a Faceplate Kit

See Standard Color Combinations page for faceplate, stripe, and button colors

QSGFP - -

Faceplate

Prefix

Color/

Finish

Number

of Shade

Columns

Omit = none

1 = 1 column

2 = 2 columns

3 = 3 columns

Architectural Matte

Finishes

Standard

(ship in 48 hours)

White  WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Architectural Metal

Finishes

BrightBrass BB

BrightChrome BC

BrightNickel BN

SatinBrass SB

Satin Chrome SC

Satin Nickel SN

AntiqueBrass QB

AntiqueBronze QZ

Anodized Aluminum

Finishes

Clear CLA

Black BLA

Brass BRA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Midnight MN

Limestone LS

Stone ST

Desert Stone DS

Terracotta TC

Hot  HT

Goldstone GS

Palladium PD

Plum PL

Turquoise TQ

Bluestone BG

Sea Glass SG

Greenbriar GB

Sienna SI

Merlot MR

Mocha Stone MS

Top

Door

Color

Faceplate Kit

(includes coordinating stripe and buttons)

Faceplate Custom Color/Finish Codes

Keypad

Engraving

Code

Keypad Engraving Codes

Omit = Unengraved

Ships with engraving certificate that

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

for custom engraving forms. Submit

completed form with order, and unit will

ship engraved as specified by customer.

Omit = same as

unit

T = Translucent

Base Unit

QSGR - _ E

Prefix

Number

ofZones

6=6zones

8=8zones

16=16zones

EcoSystem®

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Example:

QSGR-6E

6-zonebaseunit

and

QSGFP-2IV-EGN

Ivory faceplate kit with two

shade columns and general

engraving

Preset Dimming Controls

369310e 11 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

QSGB - 5B - WH -

CustomButton

Kit Prefix

Keypad

Engraving

Code

Button

Configuration

3BRL=3-buttonwith

raise/lower

(shade column)

5B=5-button

(lighting keypad)

Button

Color/

Finish

GRAFIK Eye QS with EcoSystem Control Unit

Custom Options and Model Numbers

See previous page for Custom Model Numbers

See Standard Color Combinations page for faceplate, stripe, and button colors

Custom Button Kit

Button Kit Custom

Color/Finish Codes

Architectural Matte

Finishes

White  WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Custom Stripe Kit

QSGS - WH

Stripe

Kit

Prefix

Stripe Color/

Finish

Stripe Custom Color/Finish Codes

Same as Faceplate colors on previous page

Keypad Engraving Codes

Omit = Unengraved

Ships with engraving certificate that

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

for custom engraving forms. Submit

completed form with order, and unit will

ship engraved as specified by customer.

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Preset Dimming Controls

369310e 12 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

GRAFIK Eye QS with EcoSystem Control Unit

Standard Color Combinations

See previous pages for Custom Model Numbers

Suffix Faceplate (F) Stripe (S) Button (B)

Architectural Matte

WH White Gray White

IV Ivory Beige Ivory

BE Beige Ivory Beige

GR Gray Black Gray

BR Brown Black Brown

BL Black Gray Black

AL Almond Light Almond Almond

LA Light Almond Almond Light Almond

Architectural Metal

BB BrightBrass Black Black

BC BrightChrome Black Black

BN BrightNickel Black Black

SB SatinBrass Black Black

SC SatinChrome Black Black

SN SatinNickel Black Black

QB AntiqueBrass Black Black

QZ AntiqueBronze Black Black

Anodized

CLA Clear Black Black

BLA Black Black Black

BRA Brass Black Black

Suffix Faceplate (F) Stripe (S) Button (B)

Satin Matte

MN Midnight Gray Black

TP Taupe Gray Taupe

SW Snow Gray Snow

ES Eggshell Beige Eggshell

BI Biscuit Eggshell Biscuit

LS Limestone Gray Gray

ST Stone Gray Gray

DS Desert Stone Taupe Taupe

TC Terracotta Taupe Taupe

BG Bluestone Gray Gray

HT Hot Taupe Taupe

MR Merlot Taupe Taupe

SI Sienna Brown Brown

GB Greenbriar Gray Gray

SG Sea Glass Gray Gray

MS Mocha Stone Taupe Taupe

GS Goldstone Ivory Ivory

PD Palladium Gray Gray

PL Plum Taupe Taupe

TQ Turquoise Gray Gray

LUTRON

Off

Preset

Open

F (faceplate)

B(buttons)

S (stripe)

Faceplate is comprised of a top and bottom.

The bottom will always be the color indicated

under“faceplate.”Thetopmaybethe

same color or translucent. Use the chart for

faceplates that have the same color top and

bottom. If a translucent lid is chosen, the

stripe will automatically be the same color as

the bottom lid.

Example:

IfyouorderQSGR-6E-1WH,yourGRAFIKEye

QScontrolunitwith6lightingzonesand1

shade column will come with a white faceplate

(both top and bottom), gray stripe, and white

buttons.

Preset Dimming Controls

369310e 13 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

EcoSystem bus (E1, E2)

Overview

Load wiring

Power wiring

Communication link

Occupancy sensor/contact closure input

and 24 V- power

IR input

Terminations

Maximum EcoSystem

Wire Gauge Bus Length

12 AWG (4.0 mm

) 2200 ft (671 m)

14 AWG (2.5 mm

) 1400 ft (427 m)

16 AWG (1.5 mm

) 900 ft (275 m)

18 AWG (1.0 mm

) 570 ft (175 m)

Preset Dimming Controls

369310e 14 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Power Group Wiring Example

On the QS link, there are devices that supply power and devices that consume power. Each device has a specific

number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that

suppliespowerandoneormoredevicesthatconsumepower;eachPowerGroupmayhaveonlyonepower-supplying

device. Refer to the Power Draw Units on the QS Link Spec (369405) on www.lutron.com for more information

concerning PDUs.

Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.

BetweendevicesontheQSlinkthatsupplypower,connectonlyterminals1,3,and4(NOTterminal2),shownbythe

letterBonthediagram.

Wiring can be T-tapped or daisy-chained.

LUTRON

LUTRON LUTRON

LUTRON

Power Group 1

Power Group 2

Power Group 3

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

Connect all 4

terminals within a

power group:

1: Common

2: 24 V-

3 and 4: Data

Connect only 3

terminals between

power groups:

1: Common

3 and 4: Data

Do not connect

Terminal 2: 24 V-

GRAFIK Eye QS

control unit

Supplies PDUs

QS Power Supply

Supplies PDUs

Energi Savr Node QS unit

Supplies PDUs

Control Interfaces

Consume PDUs

Control Interfaces

Consume PDUs

Quantum panel

Supplies PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

QS Sensor Module with

wired Occupancy Sensor

Consumes PDUs

Wireless Occupancy Sensor

does not consume PDUs

Preset Dimming Controls

369310e 15 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Line Voltage Wiring

Distribution Panel

1234

ABC

123456LN

To Load 1

To Load 2

To Load 3

Rear of

GRAFIK Eye QS

control unit

• Pullpowerwiringfromdistributionpanelandtolightfixtures.

• Eachlinevoltageterminalcanacceptone12AWG(4.0mm

) wire.

• ConsultLutronfornon-dimrelaywiringand/orloadsideemergencytransferwiring.

Line voltage (hot/live)

is labeled L.

120-127 V~

220-240 V~

Do not use

}

Loads 1, 2, 3

120-127 V~

220-240 V~

Preset Dimming Controls

369310e 16 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

EcoSystem Bus Wiring

LUTRON

EcoSystemBus

GRAFIK Eye QS

with EcoSystem

(limit one per

EcoSystem link)

EcoSystem

Ballast

EcoSystem

Ballast

EcoSystem

Ballast

EcoSystem

Module

Eco-10 or

Hi-Lume

Ballast

Occupancy

Sensor

Daylight Sensor

To additional ballasts and

modules (up to 64 total)

1234

123456LN

EcoSystem Bus Link Terminal Detail

EcoSystem

ballasts

To additional EcoSystem

ballasts

EcoSystem Bus Wiring Example

Preset Dimming Controls

369310e 17 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

IEC PELV/NECR Class 2 QS System Wiring

• Wiringcanbedaisy-chainedorT-tapped.

• Wiringmustberunseparatelyfromline/mainsvoltage.

• Totallengthofcontrollinkmustnotexceed2000ft(610m).

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

seeTouch QS

wallstations

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

Daisy-Chain Wiring Example

T-Tap Wiring Example

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

Sivoia QS

smart panel

Sivoia QS

smart panel

seeTouch QS

wallstations

Wire Sizes (check compatibility in your area)

QS Link Wiring Length Wire Gauge Lutron Cable Part Number

Less than 500 ft (153 m) Power (terminals 1 and 2)

1 pair 18 AWG (1.0 mm

) GRX-CBL-346S(non-plenum)

GRX-PCBL-346S(plenum)

Data (terminals 3 and 4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

500 to 2000 ft

(153 to 610 m)

Power (terminals 1 and 2)

1 pair 12 AWG (4.0 mm

) GRX-CBL-46L(non-plenum)

GRX-PCBL-46L(plenum)

Data (terminals 3 and 4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

Preset Dimming Controls

369310e 18 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit with EcoSystem

Mounting

Fits into a 4-gang

U.S. backbox, 3`

in (90.4 mm) deep

(Lutron P/N 245-254)

3 in (76.2 mm) deep

(Lutron P/N 241-400)

Mounting

screws (4)

GRAFIK Eye QS

with EcoSystem

control unit

Hinged

bottom lid

Hinged

top lid

)Lutron,Lutron,GRAFIKEye,Quantum,seeTouch,Sivoia,Softswitch,Tu-Wire,Pico,Hi-lume,Eco-10,andEcoSystemaretrademarksofLutron

Electronics Co., Inc., registered in the U.S. and other countries.

Energi Savr Node and RTISS are trademarks of Lutron Electronics Co., Inc.

iPod is a trademark of Apple Inc. registered in the U.S. and other countries.

NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.

AdvanceandMarkXareregisteredtrademarksofPhilipsElectronicsNorthAmericaCorporation.

Fill Online, Printable, Fillable, Blank 369310 GRAFIK Eye QS Control Unit with EcoSystem SPEC (369310) Form

Related forms

Fillable 369310 GRAFIK Eye QS Control Unit with EcoSystem SPEC (369310)

Fill Online, Printable, Fillable, Blank 369310 GRAFIK Eye QS Control Unit with EcoSystem SPEC (369310) Form

Related forms

First 20 documents completely FREE!