Fill - Free fillable 369309 GRAFIK Eye QS Control Unit SPEC (369309) PDF form

Preset Dimming Controls

369309e 1 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

LUTRON

GRAFIK Eye QS Control Unit

Off

Preset

Open

Description

GRAFIK Eye QS is the premier energy-saving light

and shade control. The GRAFIK Eye QS control unit

includes an astronomic timeclock, intuitive lighting

presets, and direct shade control. Additionally, the

GRAFIK Eye QS control unit is compatible with all

Lutron wired QS products and systems, including

Quantum systems.

4$ in

(119 mm)

94 in

(239 mm)

4 in

(10 mm)

2 in

(51 mm)

Front View Side View

System Topology

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

LUTRON LUTRON

LUTRON

Example of Wired System

QSE-CI-NWK-E

Sivoia QS

shade

seeTouch

wallstation

seeTouch

wallstation

Wired

occupancy

sensor

GRAFIK Eye QS

wireless control unit

GRAFIK Eye QS

wireless control unit

Wired QS link

Quantum

processor

QS Sensor

Module

Energi Savr

Node

unit

Mechanical Dimensions

Fits into a 4-gang U.S. backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or

3 in (76.2 mm) deep (Lutron P/N 241-400)

Preset Dimming Controls

369309e 2 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Features

• Pushbuttonrecalloffourpresetlightingscenes,plus

Off.

• Sixteen(16)totalavailablescenes,plusOffscene.

• Zonescancontrolmanylightsourcetypesdirectly

or through power modules.

• Optionalintegratedshadecontrolbuttons,which

canalsobeaddedtotheunitafterinstallation.

• Masteroverridebuttonstoraiseandloweralllights.

• Allowssetupoflightingscenesandshadepresets

using buttons on the control unit.

• Built-ininfrared(IR)receiver.

• ExternalIRconnection.

• Built-inastronomictimeclock.

• Infoscreenshowszonelightlevelpercentage,

energysavings,zonelabeling,andprogramming.

• Lockoutoptionpreventsaccidentalchanges.

• Occupancysensorinputand24V-powerforone

occupancy sensor.

• QScommunicationlinkforseamlessintegrationof

lights,motorizedwindowtreatments,occupancy

sensors,wallstations,andintegrationinterfaces.

• CompatiblewithallLutronQSsystemcomponents.

• Backlitbuttonswithengravingmakeuniteasyto

locate and operate.

• Availableinavarietyofcolorsandfinishes.

LUTRON

Optional

shade

control

keypad

Zone

control

Infrared

receiver

USBtype

miniB

Info

screen

Lighting

control

keypad

Off

Preset

Open

Preset

Open

Note: General Engraving (-EGN) shown.

Preset Dimming Controls

369309e 3 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Key Design Features

• LightningstrikeprotectionmeetsANSI/IEEEstandard

62.41-1980.Canwithstandvoltagesurgesofupto

6000 V~andcurrentsurgesofupto3000A.

• Testedtowithstand16kVelectrostaticdischargewithout

damage or memory loss.

• RTISS-equipped:Compensatesinrealtimeforincoming

linevoltagevariations(novisibleflickerwith+/-2%

changeinRMSvoltagepercycle,and+/-2%Hzchange

infrequencypersecond).

• Powerfailurememoryretainsprogrammingandlightlevel

settingsforupto10yearsintheeventofapowerloss.

• TheGRAFIKEyeQScontrolunitsupplies3PowerDraw

Units(PDUs)ontheQSlink.

Forcompleteinformation,seethePower Draw Units on

the QS Link Spec (369405) on www.lutron.com.

• Faceplateishingedatthetopandbottom,andstays

openat180°foreaseofaccess.

Scene and Shade Buttons

• Large,roundedbuttonsareeasytouse.

• Backlitbuttonswithoptionalengravingmakeiteasyto

findandtooperatethecontrolunitinlowlightconditions

(backlight can be disabled).

• Optionalbuttonengravingisangleduptotheeyefor

easy reading.

• Predefinedlabelstickersareincludedforfieldlabeling.

• 4presetlightingscenes,plusOff,areaccessiblefromthe

frontofthecontrolunit.

• 12additionalscenesarestoredinthecontrolunitand

areaccessiblefromtheintegraltimeclock,seeTouchQS

wallstations,andQSinterfaces.

• Lightlevelsfadesmoothlybetweenscenes.Fadetime

canbesetdifferentlyforeachscene:0to59seconds,or

1to60minutes.MaximumfadetimefromSceneOffis

3seconds.

Input Power

• 120–127V~50/60Hz

• 220–240V~50/60Hz

Listings (120 – 127 V~)

• UL   •NOM

• CSA   •CEC(Title24)

Environment

• 32to104°F(0to40°C).

• Relativehumiditylessthan90%non-condensing.

Lighting Sources/Load Types

• ZonesonEnergiSavrNodeproductswiredtothesame

QS link

 –ZonesonEnergiSavrNodewithSoftswitch

 –ZonesonEnergiSavrNodefor0–10V

 –ZonesonEnergiSavrNodewithEcoSystem

Pleasereferto“RemoteZoneMapping”forimportant

information.

• DMXchannel(s)throughDMXoutputinterface

(QSE-CI-DMX).Pleasereferto“AccessoryControls:DMX

OutputInterface”

Controlsthefollowinglightingsourceswithasmooth,

continuoussquarelawdimmingcurveoronafull

conduction non-dim basis:

• Incandescent

• Halogen

• Magneticlow-voltagetransformer

• LutronTu-Wireelectronicfluorescentdimmingballast

• LutronHi-lume2-wireLTELEDdriver

• AdvanceMarkXR electronic dimming ballast

• Neonandcoldcathode

• Non-dim(incandescent,magneticlow-voltage,Tu-Wire,

or neon/cold cathode)

• CreeLR4/6,120V~fixtures(forloadingcapacities,

pleaserefertotheLEDreportcardlocatedat

www.lutron.com/LEDtool)

 Pleasereferto“Capacities”formoreinformation.

Controlsthefollowinglightingsourceswithasmooth,

continuoussquarelawdimmingcurveoronafull

conduction non-dim basis through separate Lutron power

interfaces:

• Electroniclow-voltagetransformers(useELVor

Phase-Adaptive power module)

• Lutron3-wirecontrolledelectronicfluorescentdimming

ballasts(usefluorescent3-wirepowermodule)

• Lutron3-wirecontrolledLEDdrivers(useflourescent

3-wire power module)

• Non-dim(useswitchingmodule)

• 0–10V(useTVI)

Note:Azonemaybeprogrammedtocontrolonlyone

load type at a time.

Specifications

Preset Dimming Controls

369309e 4 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Astronomic Timeclock

• Integraltoallunits.

• 7dailyschedulesavailable.

• Oneavailableholidayscheduleisprogrammablebydate

up to one year in advance.

• 25eventsperdaymaximum.

• Timeclockeventsareprogrammabletocontrolscenes

thataffectanyEnergiSavrNodeunitconnectedon

the QS link without changing the local scene on the

GRAFIKEye QS control unit.

• Astronomictimesareprogrammablebyintegralcity

database or by entering latitude and longitude. Sunrise/

Sunset times automatically adjust throughout the year

based on location.

• AutomaticallyadjustsforDaylightSavingTime(DST);

DSTisprogrammable.

• Localtimeclockeventscanactivateanyofthefollowing

features:

 –Scenes1to16andOff

 –Anyavailableshadepresets

 –StartandEndafterhoursmode

 –EnableandDisabledaylightingforallzones/groups

 –EnableandDisableoccupancyforoccupancy/vacancy

sensors

 –EnableandDisableoccupiedeventsforalloccupancy

sensors

System Communications and Capacities

• Low-voltagetypeIECPELV/NECR Class 2 wiring

connectscontrolunits,wallstations,motorizedshades,

andcontrolinterfaces.

• AQSsystemcanhaveupto100devicesand

100zones.

Infrared

• Infrared(IR)receiverallowsinfraredtransmitterstoselect

8scenes,raise/lowerlightingzones,orraise/lower

shades.

• Transmitterbuttonsimitatebuttonsonfaceplate.

• 50ft(15m)lineofsightrange.

• Terminalblockinfraredinputforconnectiontoawired

IRinputfromthird-partyequipment.

• IRcanbedisabledviaprogramming.

• WorkswithLutronGRX-ITandGRX-8ITinfraredremote

controls.

Shade Control

• TheGRAFIKEyeQScontrolunitcanincludeupto

3shade button columns. Each column has backlit open,

preset, close, and raise/lower buttons.

• Eachshadebuttoncolumncanbeprogrammedto

operateoneshadeoragroupofshades.(Shadesmay

be assigned to more than one shade button column).

• Faceplatesareavailablewith1,2and3shadebutton

columns.

Zone Control

• Eachzonehasadedicatedraiseandlowerbuttonto

adjustthezone.

• Eachzonehasadedicated7LEDbargraphforlevel

status.Percentageoflightlevelandenergysavedis

displayedontheinfoscreen.

• AllzoneinformationhasbluebacklitLEDs.Backlight

turnsoffwhenidlefor30seconds.

• High-endandlow-endtrimsettingsareadjustableper

zone(highendfrom99to55%;lowendfrom45to1%).

Note:Trimforremotezonesmustbeadjustedlocallyon

the Energi Savr Node unit.

• Eachzoneisprogrammabletoonlyoneloadtypeata

time.

Info Screen

• OLED(organicLED)screenisviewablefromallangles.

• Screenturnsoffwhenidlefor30seconds.

• Programmablezonelabels.

• Programmablescenelabels.

• Statusofreal-timezonepercentageandenergysavings.

• Programmabletimeclockschedules.

• Programmableshadelabels.

• Selectabledisplaylanguages:

–English –Spanish –French

–Italian –German –Portuguese

Specifications

Preset Dimming Controls

369309e 5 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Specifications

Accessory Controls: seeTouch QS Wallstations

(QSWS2)

• WiredseeTouchQSwallstationsprovidethefollowing

features:

 –Accesstooneormoreofthe16scenesonthe

GRAFIK Eye QS control unit

 –Zonetoggle,partitioning,sequencing,finetune,panic

mode, and timeclock enable/disable

 –Contactclosureinputs

 –Certainfunctionsareonlyavailableonspecific

wallstationconfigurations.RefertotheseeTouchQS

specificationsubmittal.

Accessory Controls: QS Sensor Module (QSM2)

• TheQSSensorModuleprovidesameanstolinkwired

or wireless occupancy sensors or daylight sensors, Pico

controls,andwiredinfraredsensorstoaGRAFIKEyeQS

control unit via the wired QS link.

 –Occupancysensorswired(orwirelesslylinked)toa

QS Sensor Module can be used by one or more

GRAFIK Eye QS control units on the wired link.

 –Daylightsensorswired(orwirelesslylinked)toa

QS Sensor Module can be used by one or more

GRAFIK Eye QS control units on the wired link.

 –Infraredsensorscancontroleitheroneormore

zonesorscenesontheGRAFIKEyeQScontrolunit.

Functionalityvaries;refertothedocumentationforthe

QSSensorModulefordetails.

 –PicowirelesscontrolswirelesslylinkedtoaQSSensor

Modulecanbeusedtocontroloneormorezonesor

scenes on the GRAFIK Eye QS control unit.

 –Picowiredcontrolscanbeused,whenconnectedto

aQSSensorModule,tocontroloneormorezonesor

scenes on the GRAFIK Eye QS control unit.

Accessory Controls: Contact Closure Input/Output

Interface (QSE-IO)

• Recallspresetlightlevelsforthefollowingsetofsceneson

the GRAFIK Eye QS control unit:

Scenes1-4andOff Scenes9-12andOff

Scenes5-8andOff Scenes13-16andOff

• Sequencescenes5-16,Enable/DisableZoneLockout,

Enable/DisableSceneLockout,Enable/DisablePanicMode,

Enable/DisableTimeclock.

• OccupancySensors.Anindividualinputcountsas

1occupancysensorfortheGRAFIKEyeQScontrolunit.

EachinputcanbeassignedtoeitherSceneControlorZone

Control(pleaserefertotheOccupancySensor(s)sectionof

this guide).

• ZoneToggle.Allowsaninputtotoggleoneormorezones

betweenprogrammablepresetlevel(s)andoff.

• ShadeOutputmode.AShadeColumnontheGRAFIKEye

QS control unit can be linked to control outputs 1-3 and/or

outputs 4-5 on the QSE-IO.

Accessory Controls:

DMX Output Interface (QSE-CI-DMX)

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

mappedtoanysingleDMX512Channel.

• AnyzoneontheGRAFIKEyeQScontrolunitcanbe

simultaneouslymappedtoanythreeDMX512channels

(providingRGB/CMYcontrol).

• DMXloadscannotbeusedwithdaylighting.

Accessory Controls: Ethernet and RS232 Interface

(QSE-CI-NWK-E)

• Allowsformonitoringandcontroloftheoutputsandlocal

scenesoftheGRAFIKEyeQScontrolunit.

Accessory Controls: QS Keyswitch Wallstations

(QSWS2-KS)

• RecallspresetlightlevelsforanytwoscenesincludingOff.

• Allowsfine-tuning(raise/lowerlevel)ofazoneorgroupof

zones.

• Starts/Stopsscenesequencings(Scenes1-4or

Scenes5-16)

• Enables/DisablesTimeclock

• Enables/Disablesoccupancysensors

• Enables/Disableddaylightsensors

• AllowstoggleofZone(s)toapresetlevelandoff.

• Enables/Disablespanicmode.

• Starts/Stopsafterhoursmode.

Other Accessory Controls and Devices

• EnergiSavrNode QS (ESN).Seethespecificationsubmittal

forcompletedetails.

Preset Dimming Controls

369309e 6 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Specifications

Occupancy Sensor(s)

• TheGRAFIKEyeQScontrolunitworkswithoccupancy

sensors through either:

 –SceneControl:Upto16sensorsactivateuser-selected

occupancy and vacancy scenes.*

 –ZoneControl:uptofoursensorsperzoneactivate

user-selectedoccupancyandvacancyzonelevels.

• Occupancysensorsmayinclude:

 –ContactclosuresensorswiredtoCCIinputonbackof

GRAFIK Eye QS control unit

 –WiredorwirelesssensorsconnectedQSSensorModule

(QSM)

• Ifanysensorinagroupdetectsoccupancy,thenthe

GRAFIK Eye QS control unit will go to the designated

occupancysceneorzonelevel.

• Ifallsensorsinagroupdetectvacancy,thenthe

GRAFIK Eye QS control unit will go to the designated

vacancysceneorzonelevel.

• Lowbattery:theDiagnosticsscreenwilldisplayalow

battery symbol when applicable.

• IftheGRAFIKEyeQScontrolunitdoesnotreceivea

signalfromanoccupancysensoronthelink(usuallydue

to a dead battery), the lights associated with that sensor

will go to the occupied level.

Daylight Sensor(s)

• TheGRAFIKEyeQScontrolunitallowsdaylightsensors

tocontroloneormorelightingzonestoadjustelectric

light levels based on measured daylight levels.

• Daylightsensorsmayinclude:

 –WiredorwirelesssensorsconnectedtoaQSsensor

module (QSM)

• Adaylightsensorcancontroloneormore

GRAFIKEyeQScontrolunitzones:

 –Eachzonecanbecalibratedtotargetlightlevels

 –Azonecanbecontrolledbynomorethanonedaylight

sensor

• Daylightcontrolcanbeenabledordisabledona

scene-by-scene basis

 –Bydefault,daylightcontrolisenabledinallscenes

Note:DaylightcontrolthroughtheGRAFIKEyeQScontrol

unitonlyaffectsselectlightingloads.Shadegroups

cannotbecontrolledbydaylightsensors.Daylightingdoes

notaffectDMXorRGB/CMYDMXloads.

DaylightingofRemoteZoneslinkedtoEnergiSavrNode

zonesmustbeconfiguredattheEnergiSavrNodeunitor

throughtheEnergiSavrNodeappforiPod.

Contact Closure Input (CCI)

with Power Supply Output

• EachGRAFIKEyeQScontrolunithasonecontactclosure

input (Terminal A).

 –Theattacheddevicemustprovideadrycontactclosure

or solid-state output.

 –Inputismiswire-protectedupto36V-.

• Thecontactclosureiscapableofacceptingthefollowing

typesofinputs:

 –Maintained(default):TheGRAFIKEyeQScontrolunitwill

act on both a contact closure and a contact open/release

event.

 –Momentary:TheGRAFIKEyeQScontrolunitwillacton

only contact closure events.

• EachGRAFIKEyeQScontrolunitcansupply

50mA maximum at 24 V-.

 –Usefulforpoweringoccupancysensors.

 –Anauxiliarypowersupplymustbeusedifthedevice

requiresmorethan50mA.

• TheCCIiscapableofoperatinginthefollowingmodes

 –Occupancy:Ifanoccupancysensoriswireddirectlyto

the GRAFIK Eye QS control unit.

 –Emergency:ThissettingallowstheGRAFIKEye QS

control unit to work with a LUT-ELI. When an emergency

situationisdetected,alllightswillgotofullon,andno

operations will be allowed until the emergency signal is

cleared.

 –Afterhours:AllowstheCCItostartandendtheafterhours

mode.

 –Timeclock:AllowstheCCItoenableanddisablethe

timeclock.

 –SceneLockout:Preventstheuserfrommakingany

changes to the control unit. The current scene will stay on

until the CCI enables normal operation.

 –SaveNever:Preventsanychangesfrombeingsaved

while the CCI is being used.

 –DisableCCI:TheCCIwillhavenoeffectonthesystem

andwillnotappearonthelistofavailablesensors.

Security Lockout Password

• A4-characterpassword(usingcharactersAtoZand

0to 9) can be enabled/disabled to lock out access to the

Programming Menu.

• Bydefaultthereisnopasswordenabledonthe

GRAFIKEye QS control unit.

• Ifcasethe4-digitpasswordisforgotten,contactLutron

Customer Assistance to regain access.

* Applicable only to units that ship with ﬁrmware version 9.002 and higher. Previous versions support up to 4 sensors.

Preset Dimming Controls

369309e 7 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Remote Zone Mapping

• MapaGRAFIKEyeQSzonedirectlytoanEnergiSavr

Node output so that programmed scenes in the GRAFIK

EyeQScontrolunitwilldirectlycontroltheoutputlevelsof

the Energi Savr Node.

• Adjusthigh-endandlow-endtrimforremotezonesthrough

theEnergiSavrNodeorEnergiSavrappsoftware.

• ChangeloadtypesofremotezonesthroughtheEnergiSavr

NodeorEnergiSavrappsoftware.

• ConfiguredaylightingforremotezonesthroughtheEnergi

SavrNodeorEnergiSavrappsoftware.

• Required:

 –GRAFIKEyeQScontrolunitwithfirmwareversion7.000

or higher

 –EnergiSavrNodeunitwithfirmwareversion6.000or

higher

 –EnergiSavrappversion6.0.0orhigher(requiredonlyif

theEnergiSavrNodeunithasbeenconfiguredusingthe

app)

Partitioning

• Whenpartitionisopen,creatingonelargespace,

automaticallycombineslightingpresetfunctionsformultiple

GRAFIK Eye QS control units.

• Whenpartitionisclosed,creatingtwoormoresmaller

spaces,lightingpresetfunctionsbecomeindependent.

• RequiresoneQSWS2-2Bwallstation,aGRX-IRPSinfrared

transmitter/receiverpair,andaGRX-12VDCpowersupply

foroperation.

• Ifoccupancysensorsarerequiredinapartitionedspace,

note that each room’s occupancy sensor(s) will operate

independentofthepartitionstatus.

Specifications

Preset Dimming Controls

369309e 8 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

220 – 240 V~ 50 / 60 Hz 120 – 127 V~ 50 / 60 Hz

Unit Capacity (watts) 3000 2000

MLV 3000 VA / 2400 W 2000 VA / 1600 W

ZoneCapacity(watts) 40 – 1200 25 – 800

MLV 40

– 1200 VA / 40 – 960 W 25 – 800 VA / 25 – 600 W

Load Type Notes (Zones 1, 2 and 3)

• Allelectroniclow-voltage(ELV)lightingusedwithaninterfacemustberatedforreversephasecontroldimming.Before

installinganELVlightsource,verifywiththemanufacturerthattheirtransformercanbedimmed.Whendimming,an

ELVinterface(suchasthePHPM-PA-DV-WH)mustbeusedwiththecontrolunit.

• Notallzonesmustbeconnected;however,connectedzonesmusthaveaminimumloadasspecifiedabove.

• Maximumtotallightingloadforamagneticlow-voltage(MLV)variesbyinputvoltage:

– 120 – 127 V~: 800 VA / 600 W

– 220 – 240 V~: 1200 VA / 960 W

• MaximumtotallightingloadforLutronTu-WireandAdvanceMarkXR electronic dimming ballasts (120 to 127 V~ only)

mustnotexceed6Aperzoneor16Aperunit.

• Nozonemaybeloadedwithmorethanthecapacityspecifiedabove.Forhigherwattageapplications,orfor277V~

applications,useLutronpowermodulePHPM-PA,PHPM-WBX,PHPM-PA-DV,PHPM-SW,orPHPM-WBX-DV.

• Forcontrollinglow-wattageloads(CFL,LED)inanon-dimapplication,contactLutronCustomerAssistanceforthe

appropriate solution.

System Limits

• TheQSwiredcommunicationlinkislimitedto100devicesor100zones.

Capacities

Preset Dimming Controls

369309e 9 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

GRAFIK Eye QS Control Unit

Custom Color Options and Model Numbers

You must order a Base Unit and a Faceplate Kit

See Standard Color Combinations page for faceplate, stripe, and button colors

QSGFP - -

Faceplate

Prefix

Color/

Finish

Number

ofShade

Columns

Omit = none

1 = 1 column

2 = 2 columns

3 = 3 columns

Architectural Matte

Finishes

Standard

(ship in 48 hours)

White  WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Architectural Metal

Finishes

BrightBrass BB

BrightChrome BC

BrightNickel BN

SatinBrass SB

Satin Chrome SC

Satin Nickel SN

AntiqueBrass QB

AntiqueBronze QZ

Anodized Aluminum

Finishes

Clear CLA

Black BLA

Brass BRA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Midnight MN

Limestone LS

Stone ST

DesertStone DS

Terracotta TC

Hot  HT

Goldstone GS

Palladium PD

Plum PL

Turquoise TQ

Bluestone BG

Sea Glass SG

Greenbriar GB

Sienna SI

Merlot MR

Mocha Stone MS

Top

Door

Color

Faceplate Kit

(includes coordinating stripe and buttons)

Faceplate Custom Color/Finish Codes

Keypad

Engraving

Code

Keypad Engraving Codes

Omit = Unengraved

Shipswithengravingcertificatethat

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

forcustomengravingforms.Submit

completedformwithorder,andunitwill

shipengravedasspecifiedbycustomer.

Omit = same as

unit

T = Translucent

Base Unit

QSGR - _ P

Prefix

Number

ofZones

3=3zones

4=4zones

6=6zones

Phase Control Triac

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Example:

QSGR-6P

6-zonebaseunit

and

QSGFP-2IV-EGN

Ivoryfaceplatekitwithtwo

shade columns and general

engraving

Preset Dimming Controls

369309e 10 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

QSGB - 5B - WH -

CustomButton

KitPrefix

Keypad

Engraving

Code

Button

Configuration

3BRL=3-buttonwith

raise/lower

(shade column)

5B=5-button

(lighting keypad)

Button

Color/

Finish

GRAFIK Eye QS Control Unit

Custom Options and Model Numbers

See previous page for Other Custom Model Numbers

See Standard Color Combinations page for faceplate, stripe, and button colors

Custom Button Kit

Button Kit Custom

Color/Finish Codes

Architectural Matte

Finishes

White  WH

Ivory IV

Beige  BE

Gray GR

Brown  BR

Black  BL

Almond AL

Light Almond LA

Satin Color Matte

Finishes

Snow SW

Biscuit  BI

Eggshell ES

Taupe TP

Custom Stripe Kit

QSGS - WH

Stripe

Kit

Prefix

Stripe Color/

Finish

Stripe Custom Color/Finish Codes

Same as Faceplate colors on previous page

Keypad Engraving Codes

Omit = Unengraved

Shipswithengravingcertificatethat

customer can redeem at no charge

EGN = General Engraving

NST = Non-Standard Text Engraving

Please visit the GRAFIK Eye QS website

at www.lutron.com/grafikeyeqs

forcustomengravingforms.Submit

completedformwithorder,andunitwill

shipengravedasspecifiedbycustomer.

6910

11 12

815 16

9-16

1-8

Off

6910

11 12

815 16

9-16

1-8

Open

Preset

Lighting

keypad

Shade

column

Preset Dimming Controls

369309e 11 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

GRAFIK Eye QS Control Unit Standard Color Combinations

See previous pages for Custom Model Numbers

Suffix Faceplate (F) Stripe (S) Button (B)

Architectural Matte

WH White Gray White

IV Ivory Beige Ivory

BE Beige Ivory Beige

GR Gray Black Gray

BR Brown Black Brown

BL Black Gray Black

AL Almond Light Almond Almond

LA Light Almond Almond Light Almond

Architectural Metal

BB BrightBrass Black Black

BC BrightChrome Black Black

BN BrightNickel Black Black

SB SatinBrass Black Black

SC SatinChrome Black Black

SN SatinNickel Black Black

QB AntiqueBrass Black Black

QZ AntiqueBronze Black Black

Anodized

CLA  Black Black

BLA Black Black Black

BRA Brass Black Black

Suffix Faceplate (F) Stripe (S) Button (B)

Satin Matte

MN Midnight Gray Black

TP Taupe Gray Taupe

SW Snow Gray Snow

ES Eggshell Beige Eggshell

BI Biscuit Eggshell Biscuit

LS Limestone Gray Gray

ST Stone Gray Gray

DS DesertStone Taupe Taupe

TC Terracotta Taupe Taupe

BG Bluestone Gray Gray

HT Hot Taupe Taupe

MR Merlot Taupe Taupe

SI Sienna Brown Brown

GB Greenbriar Gray Gray

SG Sea Glass Gray Gray

MS Mocha Stone Taupe Taupe

GS Goldstone Ivory Ivory

PD Palladium Gray Gray

PL Plum Taupe Taupe

TQ Turquoise Gray Gray

LUTRON

Off

Preset

Open

F(faceplate)

B(buttons)

S (stripe)

Faceplateiscomprisedofatopandbottom.

The bottom will always be the color indicated

under“faceplate.”Thetopmaybethe

samecolorortranslucent.Usethechartfor

faceplatesthathavethesamecolortopand

bottom.Ifatranslucentlidischosen,the

stripe will automatically be the same color as

the bottom lid.

Example:

IfyouorderQSGR-4P-1WH,yourGRAFIK

EyeQScontrolunitwith4lightingzonesand

1shadezonewillcomewithawhitefaceplate

(both top and bottom), gray stripe, and white

buttons.

Preset Dimming Controls

369309e 12 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Wiring Diagrams

1234

ABC

123456LN

Load wiring

Communication link

Occupancy sensor/contact closure input and 24 V- power

IR input

Terminations

Preset Dimming Controls

369309e 13 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Power Group Wiring Example

OntheQSlink,therearedevicesthatsupplypoweranddevicesthatconsumepower.Eachdevicehasaspecific

numberofPowerDrawUnits(PDUs)iteithersuppliesorconsumes.APowerGroupconsistsofonedevicethat

suppliespowerandoneormoredevicesthatconsumepower;eachPowerGroupmayhaveonlyonepower-supplying

device.RefertothePower Draw Units on the QS LinkSpec(369405)onwww.lutron.comformoreinformation

concerningPDUs.

Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.

BetweendevicesontheQSlinkthatsupplypower,connectonlyterminals1,3,and4(NOTterminal2),shownbythe

letterBonthediagram.

Wiring can be T-tapped or daisy-chained.

LUTRON

LUTRON LUTRON

LUTRON

Power Group 1

Power Group 2

Power Group 3

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

(Do not connect

terminal 2: 24 V-)

Connect all 4

terminals within a

power group:

1: Common

2: 24 V-

3 and 4: Data

Connect only 3

terminals between

power groups:

1: Common

3 and 4: Data

Do not connect

Terminal 2: 24 V-

GRAFIK Eye QS

control unit

Supplies PDUs

QS Power Supply

Supplies PDUs

Energi Savr Node QS unit

Supplies PDUs

Control Interfaces

Consume PDUs

Control Interfaces

Consume PDUs

Quantum panel

Supplies PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

Wallstations

Consume PDUs

QS Sensor Module with

wired Occupancy Sensor

Consumes PDUs

Wireless Occupancy Sensor

does not consume PDUs

Preset Dimming Controls

369309e 14 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

Mounting

Line Voltage Wiring

Fits into a 4-gang

U.S. backbox,

3` in (90.4 mm) deep

(Lutron P/N 245-254)

3 in (76.2 mm) deep

(Lutron P/N 241-400)

1234

ABC

123456LN

Distribution Panel

120 – 127 V~ 50 / 60 Hz

220 – 240 V~ 50 / 60 Hz

1234

ABC

123456LN

To Load 1

To Load 2

To Load 3

To Load 4

To Load 5

To Load 6

Rear of

QS control unit

• Pullpowerwiringfromdistributionpanelandtolightfixtures.

• Eachlinevoltageterminalcanacceptone12AWG(4.0mm

) wire.

• ConsultLutronfornon-dimrelaywiringand/orloadsideemergencytransferwiring.

Mounting

screws (4)

GRAFIK Eye

QS control unit

Hinged

bottom lid

Hinged

top lid

Line voltage (Hot/Live)

is labeled L.

Preset Dimming Controls

369309e 15 05.10.18

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

Control Unit

IEC PELV/NECR Class 2 QS System Wiring

• Wiringcanbedaisy-chainedorT-tapped.

• Wiringmustberunseparatelyfromline/mainsvoltage.

• Totallengthofcontrollinkmustnotexceed2000ft(610m).

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

seeTouch QS

wallstations

LUTRON

LUTRONLUTRON

LUTRON

LUTRON LUTRON LUTRON

LUTRON

Daisy-Chain Wiring Example

T-Tap Wiring Example

GRAFIK Eye QS

Control Unit

Sivoia QS

Shade

Sivoia QS

smart panel

Sivoia QS

smart panel

seeTouch QS

wallstations

Wire Sizes (check compatibility in your area)

QS Link Wiring Length Wire Gauge Lutron Cable Part Number

Lessthan500ft(153m) Power (terminals 1 and 2)

1 pair 18 AWG (1.0 mm

) GRX-CBL-346S(non-plenum)

GRX-PCBL-346S(plenum)

Data(terminals3and4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

500to2000ft

(153 to 610 m)

Power (terminals 1 and 2)

1 pair 12 AWG (4.0 mm

) GRX-CBL-46L(non-plenum)

GRX-PCBL-46L(plenum)

Data(terminals3and4)

1 twisted, shielded pair 22 AWG (0.5 mm

)

)Lutron,Lutron,GRAFIKEye,Hi-lume,Quantum,

seeTouch,Sivoia,Softswitch,Tu-Wire,Picoand

EcoSystemaretrademarksofLutronElectronicsCo.,

Inc., registered in the U.S. and other countries.

EnergiSavrNodeandRTISSaretrademarksof

Lutron Electronics Co., Inc.

iPodisatrademarkofAppleInc.registeredinthe

U.S. and other countries.

NECisaregisteredtrademarkofNationalFire

Protection Association, Quincy, Massachusetts.

AdvanceandMarkXareregisteredtrademarksof

Philips Electronics North America Corporation.

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

369309 GRAFIK Eye QS Control Unit SPEC (369309)

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank 369309 GRAFIK Eye QS Control Unit SPEC (369309) Form

Related forms

Fillable 369309 GRAFIK Eye QS Control Unit SPEC (369309)

Fill Online, Printable, Fillable, Blank 369309 GRAFIK Eye QS Control Unit SPEC (369309) Form

Related forms

First 20 documents completely FREE!