Fillable 369313 GRAFIK Eye QS Wireless Control Unit SPEC (369313)

Fill Online, Printable, Fillable, Blank 369313 GRAFIK Eye QS Wireless Control Unit SPEC (369313) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369313 GRAFIK Eye QS Wireless Control Unit SPEC (369313)

On average this form takes 30 minutes to complete

The 369313 GRAFIK Eye QS Wireless Control Unit SPEC (369313) form is 23 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 119 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Preset Dimming Controls
369313g 1 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
GRAFIK Eye QS Wireless Control Unit
GRAFIK Eye QS Wireless is the premier energy-saving light
and shade control. The GRAFIK Eye QS control unit includes
an astronomic timeclock, intuitive lighting presets, and direct
shade control. Now with wireless technology, you can use
the GRAFIK Eye QS Wireless control unit to seamlessly
integrate with a variety of Lutron wireless products and
systems, including RadioRA2, RadioPowrSavr occupancy,
vacancy, and daylight sensors, Sivoia QS Wireless shades,
Pico wireless controls, and other GRAFIK Eye QS Wireless
control units. Additionally, the GRAFIK Eye QS Wireless is
compatible with all Lutron wired QS products and systems,
including Quantum.
Mechanical Dimensions
Fits into a 4-gang U.S. backbox, 3
1
⁄2 in (90.4 mm) deep (Lutron P/N 245254) or 3 in (76.2 mm) deep (Lutron P/N 241400)
Front View Side View
9
3
⁄8 in
(239 mm)
2 in
(51 mm)
3/8 in
(10 mm)
4
11
⁄16 in
(119 mm)
LUTRON
1
2
3
4
Off
Preset
Close
Open
1
Preset Dimming Controls
369313g 2 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
System Topologies
The GRAFIK Eye QS Wireless control unit can be specified in four different system topologies. Examples of each are shown
below.
30 ft (10 m) wireless range;
60 ft (20 m) in open air
Example of Wired System
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
QSE-CI-NWK-E
Sivoia QS
shade
seeTouch QS
wallstation
seeTouch QS
wallstation
Wired
occupancy sensor
GRAFIK Eye QS
wireless control unit
GRAFIK Eye QS
wireless control unit
Wired QS link
Quantum
processor
QS sensor
module
Energi Savr Node
unit
Example of GRAFIK Eye-centric
Wireless System
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Wireless
Sivoia QS
shade
Wireless
occupancy
sensor
GRAFIK Eye QS
wireless control unit
GRAFIK Eye QS
wireless control unit
Pico
wireless
control
Wireless
daylight
sensor
Example of Mixed GRAFIK Eye-centric
Wired/Wireless System
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Wireless
Sivoia QS
shade
Wired QS link
Wired
occupancy
sensor
seeTouch QS
walstations Wireless
occupancy
sensor
GRAFIK Eye QS
wireless control unit
Pico
wireless
control
Wireless
daylight
sensor
Refer to RadioRA 2 documentation
(www.lutron.com/radiora2)
for specification information.
Note: Wired QS link is disabled when
the GRAFIK Eye QS control unit is
added to a RadioRA 2 system.
Example of Wireless System
with Main Repeater (RadioRA 2)
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Wireless
occupancy
sensor
Main
repeater
RadioRA 2
dimmer
RadioRA 2
keypad
GRAFIK Eye QS
wireless control unit
2
Preset Dimming Controls
369313g 3 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Features
• LutronproprietaryClearConnectRFtechnology.
Operates in the 434 MHz band.
• Pushbuttonrecalloffourpresetlightingscenes,
plus Off.
• Sixteen(16)totalavailablescenes,plusOffscene.
• Zonescancontrolmanylightsourcetypesdirectly
or through power modules.
• Optionalintegratedshadecontrolbuttons,which
can also be added to the unit after installation.
• Masteroverridebuttonstoraiseandlowerall
lights.
• Allowssetupoflightingscenesandshadepresets
using buttons on the control unit.
• Built-ininfrared(IR)receiver.
• ExternalIRconnection.
• Built-inastronomictimeclock.
• Infoscreenshowszonelightlevelpercentage,
energy savings, zone labeling, and programming.
• Lockoutoptionpreventsaccidentalchanges.
• Occupancysensorinputand24V- power for
one occupancy sensor.
• QScommunicationlinkforseamlessintegrationof
lights, motorized window treatments, occupancy
sensors, wallstations, and integration interfaces.
• CompatiblewithallLutronQSsystem
components.
• Wirelesscommunicationforseamlessintegration
with a variety of Lutron wireless products and
systems, including RadioRA2, Radio Powr Savr
occupancy, vacancy, and daylight sensors, Sivoia
QS wireless shades, Pico wireless controls, and
other GRAFIK Eye QS wireless control units.
• Backlitbuttonswithengravingmakeuniteasyto
locate and operate.
• Availableinavarietyofcolorsandfinishes.
LUTRON
OK
1 2 3 4 5 6
MiniBMicro
Zone
control
Optional
shade
control
keypad
Info
screen
Infrared
receiver
Lighting
control
keypad
1
2
3
4
Off
Off
Preset
Close
1
2
3
4
Open
Preset
Close
Open
Note: General Engraving (-EGN) shown.
orUSBreceptacle(oneonly):
3
Preset Dimming Controls
369313g 4 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Zonescanalsocontrolthefollowinglightingsourceswitha
smooth, continuous square law dimming curve or on a full
conduction non-dim basis through separate Lutron power
modules:
• Electroniclow-voltagetransformers(useELVor
Phase-Adaptive power module)
• Lutron3-wirecontrolledelectronicfluorescentdimming
ballasts (use fluorescent 3-wire power module)
• Lutron3-wirecontrolledLEDdrivers(useflourescent3-wire
power module)
• Non-dim(useswitchingmodule)
• 0–10V- (use ten-volt interface)
Note: A zone may be programmed to control only one load
type at a time.
Key Design Features
• RFmeetsFCCPart15ClassB.
• LightningstrikeprotectionmeetsANSI/IEEEstandard
62.41-1980. Can withstand voltage surges of up to
6000 V~ and current surges of up to 3000 A.
• Testedtowithstand16kVelectrostaticdischargewithout
damage or memory loss.
• RTISS Equipped: Compensates in real time for incoming
linevoltagevariations(novisibleflickerwith+/–2%change
inRMSvoltagepercycle,and+/–2%Hzchangein
frequency per second).
• Powerfailurememoryretainsprogrammingandlightlevel
settings for up to 10 years in the event of a power loss.
• TheGRAFIKEyeQScontrolunitsupplies3PowerDraw
Units(PDUs)ontheQSlink.
For complete information, see the Power Draw Units on
the QS Link Spec (369405) on www.lutron.com.
• Faceplateishingedatthetopandbottom,andstaysopen
at 180° for ease of access.
Scene and Shade Buttons
• Large,roundedbuttonsareeasytouse.
• Backlitbuttonswithoptionalengravingmakeiteasyto
find and to operate the control unit in low light conditions
(backlight can be disabled).
• Optionalbuttonengravingisangleduptotheeyeforeasy
reading.
• Predefinedlabelstickersareincludedforfieldlabeling.
• 4presetlightingscenes,plusOff,areaccessiblefromthe
front of the control unit.
• 12additionalscenesarestoredinthecontrolunitand
are accessible from the integral timeclock, seeTouch QS
wallstations, and QS interfaces.
• Lightlevelsfadesmoothlybetweenscenes.Fadetime
can be set differently for each scene: 0 to 59 seconds, or
1 to 60 minutes. Maximum fade time from Scene Off is
3seconds.
Input Power
• 120–127V~ 50/60 Hz
• 220–240V~ 50/60 Hz
Listings (120 – 127 V~)
• ULR Listed
• CSA
• NOM
• CEC(Title24)
• FCCPart15ClassB
• ICRSS-210
• SCT
Environment
• 32to104°F(0to40°C)
• Relativehumiditylessthan90%non-condensing
Lighting Sources/Load Types
• ZonesonEnergiSavrNodeproductswiredtothesame
QS link
–ZonesonEnergiSavrNodewithSoftswitch
–ZonesonEnergiSavrNodefor0–10V-
–ZonesonEnergiSavrNodewithEcoSystem
Pleasereferto“RemoteZoneMapping”forimportant
information.
• DMXchannel(s)throughDMXoutputinterface
(QSE-CI-DMX).Pleasereferto“AccessoryControls:DMX
OutputInterface”
Zonescanalsocontrolthefollowinglightingsourceswitha
smooth, continuous square law dimming curve or on a full
conduction non-dim basis:
• Cree LR4/6, 120 V~ fixtures (for loading capacities, please
refertotheLEDreportcardlocatedat
www.lutron.com/LEDtool)
• DimmableLEDBulbs(foracompletelistofapproved
dimmableLEDspleasecall1.800.523.9466orvisit
www.lutron.com/dimcflled)
• Incandescent
• Halogen
• Magneticlow-voltagetransformer
• LutronTu-Wireelectronicfluorescentdimmingballast
• LutronHi-lume2-wireLTELEDdriver
• AdvanceMarkXR electronic dimming ballast
• Neonandcoldcathode
• Non-dim(incandescent,magneticlow-voltage,Tu-Wire,or
neon/cold cathode)
Pleasereferto“Capacities”formoreinformation.
Specifications
4
Preset Dimming Controls
369313g 5 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Astronomic Timeclock
• Integraltoallunits.
• 7dailyschedulesavailable.
• Oneavailableholidayscheduleisprogrammablebydate
up to one year in advance.
• 25eventsperdaymaximum.
• Timeclockeventsareprogrammabletocontrolscenesthat
affect any Energi Savr Node unit connected on the QS link
without changing the local scene on the GRAFIKEyeQS
control unit .
• Astronomictimesareprogrammablebyintegral
city database or by entering latitude and longitude.
Sunrise/Sunset times automatically adjust throughout the
year based on location.
• AutomaticallyadjustsforDaylightSavingTime(DST);
DSTisprogrammable.
• Localtimeclockeventscanactivateanyofthefollowing
features:
–Scenes1to16andOff
–Anyavailableshadepresets
–StartandEndafterhoursmode
–EnableandDisabledaylightingforallzones/groups
–EnableandDisableoccupancyforoccupancy/vacancy
sensors
–EnableandDisableoccupiedeventsforalloccupancy
sensors
System Communications and Capacities
• Low-voltagetypeIECPELV/NEC® Class 2 wiring connects
control units, wallstations, motorized shades, and control
interfaces.
• AQSsystemcanhaveupto100devicesand100zones.
• AQSsystemcanhaveupto30wirelessdevices.
Infrared
• Infrared(IR)receiverallowsinfraredtransmitterstoselect
8scenes, raise/lower lighting zones, or raise/lower shades.
• Transmitterbuttonsimitatebuttonsonfaceplate.
• 50ft(15m)lineofsightrange.
• Terminalblockinfraredinputforconnectiontoawired
IR input from third-party equipment.
• IRcanbedisabledviaprogramming.
• WorkswithLutronGRX-ITandGRX-8ITinfraredremote
controls.
Shade Control
• TheGRAFIKEyeQScontrolunitcanincludeupto3shade
button columns. Each column has backlit open, preset,
close, and raise/lower buttons.
• Eachshadebuttoncolumncanbeprogrammedtooperate
one shade or a group of shades. (Shades may be assigned
to more than one shade button column).
• Faceplatesareavailablewith1,2,and3shadebutton
columns.
Wireless shade limitations:
• AccesstotheSivoiaQSWirelesselectronicdriveunit(EDU)
is required to associate shades with the GRAFIKEye QS
control unit and set their raise/lower limits.
Exception: Sivoia QS Wireless cellular shades allow limit
setting from the GRAFIK Eye QS wireless control unit.
• Wiredandwirelessshadesmaynotbeprogrammedinto
the same shade button column; however, both may be
used on the same GRAFIK Eye QS control unit.
• Scenecommandsthataffectwirelessshadesacross
multiple shade button columns will have a 1-second delay
from column to column. This does not occur in RadioRA 2
systems.
Zone Control
• Eachzonehasadedicatedraiseandlowerbuttonto
adjust the zone.
• Eachzonehasadedicated7-LEDbargraphforlevel
status. Percentage of light level and energy saved is
displayed on the info screen.
• AllzoneinformationhasbluebacklitLEDs.Backlightturns
off when idle for 30 seconds.
• High-endandlow-endtrimsettingsareadjustableperzone
(highendfrom99to55%;lowendfrom45to1%).
Note: Trim for remote zones must be adjusted locally on
the Energi Savr Node unit.
• Eachzoneisprogrammabletoonlyoneloadtypeata
time.
Info Screen
• OLED(organicLED)screenisviewablefromallangles.
• Screenturnsoffwhenidlefor30seconds.
• Programmablezonelabels.
• Programmablescenelabels.
• Statusofreal-timezonepercentageandenergysavings.
• Programmabletimeclockschedules.
• Programmableshadelabels.
• Selectabledisplaylanguages:
–English –Spanish –French
–Italian –German –Portuguese
Specifications (continued)
5
Preset Dimming Controls
369313g 6 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Accessory Controls: seeTouch QS Wallstations
(QSWS2)
• WiredseeTouchQSwallstationsprovidethefollowing
features:
–Accesstooneormoreofthe16scenesonthe
GRAFIK Eye QS Wireless control unit
–Zonetoggle,partitioning,sequencing,finetune,panic
mode, and timeclock enable/disable
–Contactclosureinputs
–Certainfunctionsareonlyavailableonspecificwallstation
configurations. Refer to the seeTouch QS specification
submittal.
Wireless RF Compatibility
• FeaturesLutronproprietaryClearConnectRFTechnology
• Operatesinthe434MHzband
• CompatiblewithotherLutronwirelessproducts/systems,
such as:
–Picowirelesscontrol(P/NQSR4PorMRF2)
–RadioPowrSavroccupancy/vacancy/daylightsensors
(P/N LRF2-)
–RadioRA2wirelesssystem
–SivoiaQSwirelessproducts
–OtherGRAFIKEyeQSwirelesscontrolunits
(P/N QSGRJ-)
Accessory Controls: Pico Wireless Control
(PJ models)
• ThePicoWirelessControlisbatterypowered.Itcancontrol
GRAFIK Eye QS wireless control units within a
30 ft (10 m) range (60 ft [20 m] in open air). It provides the
following features:
–ControlofoneormorezonesontheGRAFIKEyeQS
Wireless control unit: turns zone(s) on or off, raises/lowers
zone(s), allows programmable light levels for each button,
and goes to user-programmable preset level
–ControlofoneormorescenesontheGRAFIKEye
QS Wireless control unit: the Pico wireless control can
access any three sequential scenes (1 through 16), or
any two sequential scenes and Off; and can raise and
lower lighting levels.
Note:“Unaffected”isnotavalidlevelforPicozone
programming.
Accessory Controls: QS Sensor Module (QSM2)
• TheQSSensorModuleprovidesameanstolinkwired
or wireless occupancy sensors or daylight sensors, Pico
controls, and wired infrared sensors to a GRAFIK Eye QS
control unit via the wired QS link.
–Occupancysensorswired(orwirelesslylinked)to
a QSSensor Module can be used by one or more
GRAFIKEye QS control units on the wired link.
–Daylightsensorswired(orwirelesslylinked)toa
QS Sensor Module can be used by one or more
GRAFIKEye QS control units on the wired link.
–Picowirelesscontrolscancontroleitheroneormore
zones or scenes on the GRAFIK Eye QS control unit.
–Picowiredcontrolscanbeused,whenconnectedto
a QS Sensor Module, to control one or more zones or
scenes on the GRAFIK Eye QS control unit.
–Infraredsensorscancontroleitheroneormorezonesor
scenes on the GRAFIK Eye QS control unit. Functionality
varies; refer to the documentation for the QS Sensor
Module for details.
Accessory Controls: Contact Closure Input/Output
Interface (QSE-IO)
• Recallspresetlightlevelsforthefollowingsetofsceneson
the GRAFIK Eye QS control unit:
–Scenes1–4andOff –Scenes9–12andOff
–Scenes5–8andOff –Scenes13–16andOff
• Sequencescenes5–16,Enable/DisableZoneLockout,
Enable/DisableSceneLockout,Enable/DisablePanic
Mode,Enable/DisableTimeclock.
• OccupancySensors.Anindividualinputcountsas
1occupancy sensor for the GRAFIK Eye QS control unit.
Each input can be assigned to either Scene Control or
ZoneControl(pleaserefertotheOccupancySensor(s)
section of this guide).
• ZoneToggle.Allowsaninputtotoggleoneormorezones
between programmable preset level(s) and off.
• ShadeOutputmode.AShadeColumnontheGRAFIKEye
QScontrolunitcanbelinkedtocontroloutputs1–3and/or
outputs4–5ontheQSE-IO.
Accessory Controls:
DMX Output Interface (QSE-CI-DMX)
• AnyzoneontheGRAFIKEyeQScontrolunitcanbe
mappedtoanysingleDMX512Channel.
• AnyzoneontheGRAFIKEyeQScontrolunitcanbe
simultaneouslymappedtoanythreeDMX512channels
(providingRGB/CMYcontrol).
• DMXloadscannotbeusedwithdaylighting.
Specifications (continued)
6
Preset Dimming Controls
369313g 7 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Accessory Controls:
Ethernet and RS232 Interface (QSE-CI-NWK-E)
• Allowsformonitoringandcontroloftheoutputsandlocal
scenes of the GRAFIK Eye QS control unit.
Accessory Controls:
QS Keyswitch Wallstations (QSWS2-KS)
• RecallspresetlightlevelsforanytwoscenesincludingOff
• Allowsfine-tuning(raise/lowerlevel)ofazoneorgroupof
zones
• Starts/Stopsscenesequencing(Scenes1–4or
Scenes5–16)
• Enables/DisablesTimeclock
• Enables/Disablesoccupancysensors
• Enables/Disableddaylightsensors
• AllowstoggleofZone(s)toapresetlevelandoff
• Enables/Disablespanicmode
• Starts/Stopsafterhoursmode
Other Accessory Controls and Devices
• EnergiSavrNodeQS(ESN).SeetheSpecification
Submittal for complete details.
Occupancy Sensor(s)
• TheGRAFIKEyeQScontrolunitworkswithoccupancy
sensors through either:
–Scene Control: Up to 16 sensors activate user-selected
occupancy and vacancy scenes.*
–ZoneControl:Uptofoursensorsperzoneactivate
user-selected occupancy and vacancy zone levels.
• Occupancysensorsmayinclude:
–ContactclosuresensorswiredtoCCIinputonbackof
the GRAFIK Eye QS control unit
–WirelessRadioPowrSavroccupancyorvacancysensors
(model numbers starting with LRF2)
–WiredorwirelesssensorsconnectedQSSensorModule
(QSM)
• Ifanysensorinagroupdetectsoccupancy,thenthe
GRAFIK Eye QS control unit will go to the designated
occupancy scene or zone level.
• Ifallsensorsinagroupdetectvacancy,thenthe
GRAFIK Eye QS control unit will go to the designated
vacancy scene or zone level.
• Lowbattery:theDiagnosticsscreenwilldisplayalow
battery symbol when applicable.
• IftheGRAFIKEyeQScontrolunitdoesnotreceiveasignal
from an occupancy sensor on the link (usually due to a
dead battery), the lights associated with that sensor will go
to the occupied level.
Daylight Sensor(s)
•The
GRAFIK Eye QS control unit
allows daylight sensors to
control one or more lighting zones to adjust electric light
levels based on measured daylight levels.
•Daylightsensorsmayinclude:
–
Wireless Radio Powr Savr (model numbers starting with
LRF2)
–
Wired or wireless sensors connected to a QS sensor
module (QSM)
•Adaylightsensorcancontroloneormore
GRAFIK Eye QS
zones:
–
Each zone can be calibrated to target light levels
–
A zone can be controlled by no more than one daylight
sensor
•Daylightcontrolcanbeenabledordisabledona
scene-by-scene basis
–
Bydefault,daylightcontrolisenabledinallscenes
Note:DaylightcontrolthroughtheGRAFIKEyeQScontrol
unit only affects select lighting loads. Shade groups cannot
becontrolledbydaylightsensors.Daylightingdoesnot
affectDMXorRGB/CMYDMXloads.
DaylightingofRemoteZoneslinkedtoEnergiSavrNode
zones must be configured at the Energi Savr Node unit or
through the Energi Savr Node app for iPod.
Specifications (continued)
iPod is a trademark of Apple Inc. registered in the U.S. and other
countries.
* Applicable only to units that ship with firmware version 9.002 and
higher. Previous versions support up to 4 sensors.
7
Preset Dimming Controls
369313g 8 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Contact Closure Input (CCI) with Power Supply Output
•Each
GRAFIK Eye QS control unit
has one contact closure
input (Terminal A).
–
The attached device must provide a dry contact closure
or solid-state output.
–
Input is miswire-protected up to 36 V-.
• Thecontactclosureiscapableofacceptingthefollowing
types of inputs:
–Maintained(default):TheGRAFIKEyeQScontrolunitwill
act on both a contact closure and a contact open/release
event.
–Momentary:TheGRAFIKEyeQScontrolunitwillacton
only contact closure events.
•Each
GRAFIK Eye QS control unit
can supply 50 mA
maximum at 24 V-.
–
Useful for powering occupancy sensors.
–
An auxiliary power supply must be used if the device
requires more than 50 mA.
•TheCCIiscapableofoperatinginthefollowingmodes
–
Occupancy: If an occupancy sensor is wired directly to
the
GRAFIK Eye QS control unit
, choose this setting so
that the occupancy sensor will work correctly.
–
Emergency: This setting allows the
GRAFIK Eye
QS to
work with a LUT-ELI. When an emergency situation is
detected, all lights will go to full on, and no operations
will be allowed until the emergency signal is cleared.
–
Afterhours: Allows the CCI to start and end the
afterhours mode.
–
Timeclock: Allows the CCI to enable and disable the
timeclock.
–
Scene Lockout: Prevents the user from making any
changes to the control unit. The current scene will stay
on until the CCI enables normal operation.
–
Never Save: Prevents any changes from being saved
while the CCI is being used.
–
DisableCCI:TheCCIwillhavenoeffectonthesystem
and will not appear on the list of available sensors.
Security Lockout Password
• A4-digitpassword(usingcharactersAtoZand0to9)
can be enabled/disabled to lock out access to the
Programming Menu.
• Bydefaultthereisnopasswordenabledonthe
GRAFIK Eye QS control unit.
• Ifcasethe4-digitpasswordisforgotten,contactLutron
Customer Assistance to regain access.
Specifications (continued)
Remote Zone Mapping
• MapaGRAFIKEyeQSzonedirectlytoanEnergi
SavrNode output so that programmed scenes in the
GRAFIK Eye QS control unit will directly control the output
levels of the Energi Savr Node.
• Adjusthigh-endandlow-endtrimforremotezonesthrough
the Energi Savr Node or Energi Savr app software.
• Changeloadtypesofremotezonesthroughthe
EnergiSavr Node or Energi Savr app software.
• Configuredaylightingforremotezonesthroughthe
EnergiSavr Node or Energi Savr app software.
• Required:
–GRAFIKEyeQScontrolunitwithfirmwareversion
7.000or higher
–EnergiSavrNodeunitwithfirmwareversion6.000or
higher
–EnergiSavrappversion6.0.0orhigher(requiredonlyif
the Energi Savr Node unit has been configured using the
app)
Partitioning
• Whenpartitionisopen,creatingonelargespace,
automatically combines lighting preset functions for multiple
GRAFIK Eye QS control units.
• Whenpartitionisclosed,creatingtwoormoresmaller
spaces, lighting preset functions become independent.
• RequiresoneQSWS2-2Bwallstation,aGRX-IRPSinfrared
transmitter/receiverpair,andaGRX-12VDCpowersupply
for operation.
• Ifoccupancysensorsarerequiredinapartitionedspace,
note that each room’s occupancy sensor(s) will operate
independent of the partition status.
8
Preset Dimming Controls
369313g 9 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
220 – 240 V~ 50 / 60 Hz 120 V~ 50 / 60 Hz
Unit Capacity (watts) 3000 2000
MLV
3000 VA / 2400 W 2000 VA / 1600 W
Zone Capacity (watts) 40–1200 25–800
MLV 40–1200VA/40–960W 25–800VA/25–600W
Load Type Notes
• Allelectroniclow-voltage(ELV)lightingusedwithaninterfacemustberatedforreversephasecontroldimming.Before
installing an ELV light source, verify with the manufacturer that their transformer can be dimmed. When dimming, an ELV
interface(suchasthePHPM-PA-DV-WH)mustbeusedwiththecontrolunit.
• Notallzonesmustbeconnected;however,connectedzonesmusthaveaminimumloadasspecifiedabove.
• Maximumtotallightingloadforamagneticlow-voltage(MLV)variesbyinputvoltage:
–120–127V~: 800 VA / 600 W
–220–240V~: 1200 VA / 960 W
• MaximumtotallightingloadforLutronTu-WireandAdvanceMarkXR electronic dimming ballasts (120 to 127 V~ only) must
not exceed 6 A per zone or 16 A per unit.
• Nozonemaybeloadedwithmorethanthecapacityspecifiedabove.Forhigherwattageapplications,orfor277V~
applications,useLutronpowermodulePHPM-PA,PHPM-WBX,PHPM-PA-DV,PHPM-SW,orPHPM-WBX-DV.
• Forcontrollinglow-wattageloads(CFL,LED)inanon-dimapplication,contactLutronCustomerAssistanceforthe
appropriate solution.
System Limits
• TheQSwiredcommunicationlinkislimitedto100devicesor100zones.
Capacities
X
J
O
9
Preset Dimming Controls
369313g 10 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
GRAFIK Eye QS Wireless Control Unit
Standard Model Numbers
• Seefollowingpagesfororderingcustom(non-standard)modelnumbers
• SeeStandardColorCombinationspageforfaceplate,stripe,andbuttoncolors
QSGRJ– P– WH
Number
ofZones
3 = 3 zones
4 = 4 zones
6 = 6 zones
Phase
Control
Triac
Prefix
Number of
Shade Columns
Omit = none
1 = 1 shade
column
Omit = White
T = Translucent
TopDoorColor
White
(standard color)
Example:
QSGRJ-6P-1TWH
6-zone standard white unit
with 1 shade column and
translucent top door.
Unit will ship unengraved
with engraving certificate that
customer can redeem at no
charge.
Important Note:
For any non-standard units, you must order bothaBaseUnitandaFaceplateKit.
Please see the Custom Ordering Information on the following pages.
3 Zones
QSGRJ-3P-WH
QSGRJ-3P-TWH
QSGRJ-3P-1WH
QSGRJ-3P-1TWH
4 Zones
QSGRJ-4P-WH
QSGRJ-4P-TWH
QSGRJ-4P-1WH
QSGRJ-4P-1TWH
6 Zones
QSGRJ-6P-WH
QSGRJ-6P-TWH
QSGRJ-6P-1WH
QSGRJ-6P-1TWH
Available Standard Model Numbers
10
Preset Dimming Controls
369313g 11 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
GRAFIK Eye QS Wireless Control Unit (continued)
Custom Color Options and Model Numbers
• YoumustorderaBaseUnitandaFaceplateKit
• SeeStandardColorCombinationspageforfaceplate,stripe,andbuttoncolors
Base Unit
QSGRJ– P
Number
ofZones
3 = 3 zones
4 = 4 zones
6 = 6 zones
Phase
Control
Triac
Prefix
Example:
QSGRJ-6P
6-zone base unit.
QSGFP– –
Number of
Shade Columns
Omit = none
1 = 1 column
2 = 2 columns
3 = 3 columns
Faceplate
Prefix
Architectural Matte
Finishes (standard)
(ship in 48 hours)
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Architectural Metal
Finishes
BrightBrass BB
BrightChrome BC
BrightNickel BN
SatinBrass SB
Satin Chrome SC
Satin Nickel SN
AntiqueBrass QB
AntiqueBronzeQZ
Anodized
Aluminum Finishes
Clear CLA
Black BLA
Brass BRA
Satin Color Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
Midnight MN
Limestone LS
Stone ST
DesertStone DS
Terracotta TC
Hot HT
Goldstone GS
Palladium PD
Plum PL
Turquoise TQ
Bluestone BG
Sea Glass SG
Greenbriar GB
Sienna SI
Merlot MR
Mocha Stone MS
Omit = Same
as unit
T = Translucent
Faceplate Custom Color/Finish Code
TopDoorColor
Example:
QSGFP-2IV-EGN
Ivory faceplate kit with
2shade columns and
general engraving.
Faceplate Kit (includes coordinating stripe and buttons)
Keypad Engraving Code
Omit = Unengraved
Ships with engraving
certificate that customer
can redeem at no charge
EGN = General Engraving
NST = Non-Standard Text
Engraving
Visit the GRAFIK Eye QS
website at:
www.lutron.com/grafikeyeqs
for custom engraving forms.
Submit completed form
with order and unit will ship
engraved as specified by
customer
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
1
2
3
4
Off
Open
Preset
Close
Lighting
keypad
Shade
column
11
Preset Dimming Controls
369313g 12 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
GRAFIK Eye QS Wireless Control Unit (continued)
Custom Options and Model Numbers
• SeepreviouspagesforStandardandOtherCustomModelNumbers
• SeeStandardColorCombinationspageforfaceplate,stripe,andbuttoncolors
Custom Button Kit
QSGS–
Stripe Kit
Prefix
Example:
QSGS-WH
Stripe kit with white stripe.
QSGB– – –
ButtonConfiguration
3BRL=3-buttonwithraise/
lower (shade column)
5B=5-button(lightingkeypad
Custom
ButtonKit
Prefix
Architectural Matte
Finishes
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Satin Color Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
ButtonKitCustomColor/FinishCode
Example:
QSGB-5B-WH-EGN
White 5-button, lighting
keypad button kit with
general engraving.
Custom Stripe Kit
Keypad Engraving Code
Omit = Unengraved
Ships with engraving
certificate that customer
can redeem at no charge
EGN = General Engraving
NST = Non-Standard Text
Engraving
Visit the GRAFIK Eye QS
website at:
www.lutron.com/grafikeyeqs
for custom engraving forms.
Submit completed form
with order and unit will ship
engraved as specified by
customer
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
1
2
3
4
Off
Open
Preset
Close
Lighting
keypad
Shade
column
Architectural Matte
Finishes
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Architectural Metal
Finishes
BrightBrass BB
BrightChrome BC
BrightNickel BN
SatinBrass SB
Satin Chrome SC
Satin Nickel SN
AntiqueBrass QB
AntiqueBronzeQZ
Anodized
Aluminum Finishes
Clear CLA
Black BLA
Brass BRA
Satin Color Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
Midnight MN
Limestone LS
Stone ST
DesertStone DS
Terracotta TC
Hot HT
Goldstone GS
Palladium PD
Plum PL
Turquoise TQ
Bluestone BG
Sea Glass SG
Greenbriar GB
Sienna SI
Merlot MR
Mocha Stone MS
Stripe Custom Color/Finish Code
12
Preset Dimming Controls
369313g 13 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
GRAFIK Eye QS Wireless Control Unit Standard Color Combinations
• SeepreviouspagesforStandardandCustomModelNumbers
Faceplate is comprised of a top and bottom. The bottom will always be
thecolorindicatedunder“faceplate.”Thetopmaybethesamecoloror
translucent. Use the chart for faceplates that have the same color top and
bottom. If a translucent lid is chosen, the stripe will automatically be the same
color as the bottom lid.
Example:
If you order QSGRJ-4P-1WH, your GRAFIK Eye QS with 4 lighting
zones and 1 shade zone will have a white faceplate (both top and
bottom), gray stripe, and white buttons.
LUTRON
1
2
3
4
Off
Preset
Close
Open
F (faceplate)
S (stripe)
B(buttons)
F (faceplate)
Suffix Faceplate (F) Stripe (S) Button (B)
Architectural Matte
WH White Gray White
IV Ivory Beige Ivory
BE Beige Ivory Beige
GR Gray Black Gray
BR Brown Black Brown
BL Black Gray Black
AL Almond Light Almond Almond
LA Light Almond Almond Light Almond
Architectural Metal
BB
BrightBrass Black Black
BC
BrightChrome Black Black
BN
BrightNickel Black Black
SB
SatinBrass Black Black
SC Satin Chrome Black Black
SN Satin Nickel Black Black
QB
AntiqueBrass Black Black
QZ
AntiqueBronze Black Black
Anodized
CLA Clear Black Black
BLA Black Black Black
BRA Brass Black Black
Satin Matte
MN Midnight Gray Black
TP Taupe Gray Taupe
SW Snow Gray Snow
ES Eggshell Beige Eggshell
BI Biscuit Eggshell Biscuit
LS Limestone Gray Gray
ST Stone Gray Gray
DS
DesertStone Taupe Taupe
TC Terracotta Taupe Taupe
BG Bluestone Gray Gray
HT Hot Taupe Taupe
MR Merlot Taupe Taupe
SI Sienna Brown Brown
GB Greenbriar Gray Gray
SG Sea Glass Gray Gray
MS Mocha Stone Taupe Taupe
GS Goldstone Ivory Ivory
PD Palladium Gray Gray
PL Plum Taupe Taupe
TQ Turquoise Gray Gray
13
Preset Dimming Controls
369313g 14 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Wiring Diagrams
Terminations
1234
12
ABC
123456LN
Load wiring
Communication link
Occupancy sensor/contact closure
input and 24 V- power
IR input
14
Preset Dimming Controls
369313g 15 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Power Group Wiring Example
• OntheQSlink,therearedevicesthatsupplypoweranddevicesthatconsumepower.Eachdevicehasaspecificnumber
ofPowerDrawUnits(PDUs)iteithersuppliesorconsumes.APowerGroupconsistsofonedevicethatsuppliespowerand
one or more devices that consume power; each Power Group may have only one power-supplying device. Refer to the
Power Draw Units on the QS Link Spec (369405) on www.lutron.comformoreinformationconcerningPDUs.
• WithinPowerGroupsontheQSlink,connectall4terminals(1,2,3,and4),shownbytheletterAinthediagram.Between
devicesontheQSlinkthatsupplypower,connectonlyterminals1,3,and4(NOTterminal2),shownbytheletterBonthe
diagram.
• WiringcanbeT-tappedordaisy-chained.
LUTRON
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
Power Group 1
Power Group 2
Power Group 3
(Donotconnectterminal2:24V-)
(Donotconnectterminal2:24V-)
(Donotconnectterminal2:24V-)
GRAFIK Eye QS control unit
SuppliesPDUs
Energi Savr Node QS unit
SuppliesPDUs
QS Power Supply
SuppliesPDUs
Control Interfaces
ConsumePDUs
Control Interfaces
ConsumePDUs
Quantum Processor
SuppliesPDUs
Wallstations
ConsumePDUs
Wallstations
ConsumePDUs
Wallstations
ConsumePDUs
QS Sensor Module with wired Occupancy Sensor
ConsumesPDUs
Wireless Occupancy Sensor
doesnotconsumePDUs
A
A
A
B
B
B
A
Connect all 4 terminals
within a power group:
1: Common
2: 24 V-
3 and 4: Data
B
Connect only 3 terminals
between power groups:
1: Common
2: 24 V-Donot connect
3 and 4: Data
15
Preset Dimming Controls
369313g 16 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
Mounting
• Fitsintoa4-gangU.S.backbox,3½in(90.4mm)deep(LutronP/N245254)or3in(76.2mm)deep(LutronP/N241400)
Line Voltage Wiring
• Pullpowerwiringfromdistributionpanelandtolightfixtures.
• Eachlinevoltageterminalcanacceptone12AWG(4.0mm
2
) wire.
• ConsultLutronfornon-dimrelaywiringand/orloadsideemergencytransferwiring.
GRAFIK Eye® QS control unit
Hinged top lid
Mounting screws (4)
Hinged bottom lid
Distribution Panel
120 – 127 V~ 50/60 Hz
or
220 – 240 V~ 50/60 Hz
123456LN
To Load 1
To Load 2
To Load 3
To Load 4
To Load 5
To Load 6
L N
D
Rear of QS control unit
Line voltage (Hot/Live) is labeled L
16
Preset Dimming Controls
369313g 17 06.01.18
®
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Wireless Control Unit
IEC PELV/NEC® Class 2 QS System Wiring
• Wiringcanbedaisy-chainedorT-tapped.
• Wiringmustberunseparatelyfromline/mainsvoltage.
• Totallengthofcontrollinkmustnotexceed2000ft(610m).
Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 500 ft (153 m)
Power (terminals 1 and 2)
1 pair 18 AWG (1.0 mm
2
)
GRX-CBL-346S(non-plenum)
GRX-PCBL-346S(plenum)
Data(terminals3and4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
500 to 2000 ft (153 to 610 m)
Power (terminals 1 and 2)
1 pair 12 AWG (4.0 mm
2
)
GRX-CBL-46L(non-plenum)
GRX-PCBL-46L(plenum)
Data(terminals3and4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
Daisy-Chain Wiring Example
T-Tap Wiring Example
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON LUTRON
LUTRON
GRAFIK Eye QS
Control Unit
Sivoia QS
Shade
seeTouch QS Wallstations
Sivoia QS Smart Panel
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON LUTRON
LUTRON
Sivoia QS
Smart Panel
GRAFIK Eye QS
Control Unit
Sivoia QS
Shade
seeTouch QS Wallstations
)Lutron, Lutron, GRAFIK Eye, Pico, Sivoia, Quantum, seeTouch,
Softswitch, RTISS Equipped, Clear Connect, Tu-Wire, and EcoSystem are
trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other
countries.
Radio Powr Savr, RadioRA 2, and Energi Savr Node is a trademark of
Lutron Electronics Co., Inc.
NEC is a registered trademark of National Fire Protection Association,
Quincy, Massachusetts.
UL is a trademark of UL LLC.
AdvanceandMarkXareregisteredtrademarksofPhilipsElectronics
North America Corporation.
17
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369313 GRAFIK Eye QS Wireless Control Unit SPEC (369313)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 23 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document