Vive Vue Management Suite Vive License
3691067e 1 10.02.19
Vive
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
System Overview
The Vive Vue Management Suite is a facility
management solution that creates a flexible,
productive, and energy-efficient environment for a
room, floor, or building. The system brings switching,
dimming, wall controls, and smart sensors together
under one software umbrella. The Vive Vue
Management Suite is ideal for new construction or
retrofit applications and can easily scale from a single
room to an entire building.
Vive Vue Management Suite Licenses
Works with Vive System Version 1.7 and above.
A software license is required for each Vive hub in
the system.
Start-up required (remote or on-site) for Vive Vue
commissioning only.
The software license does not include start-up.
Available licenses:
VIVE-VUE: Lighting Control Dashboard
Vive Vue is compatible with Lutron Enterprise Vue
software that allows the control of multiple buildings
with multiple different Lutron control systems from a
single software interface. See the Enterprise Vue
spec sheet for more details.
Compatible Vive Hubs
The Vive Vue Management Suite is compatible with
the following Vive wireless hub models that have
software version 1.7 or later:
• HJS-0-FM
HJS-1-X X
HJS-2-XX
1
Vive Vue Management Suite Vive License
3691067e 2 10.02.19
Vive
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Features
Navigation
Navigate through areas using graphical floor plans.
When a floorplan is not available, standard
non-graphical navigation is used.
• See Floorplan Requirements section on page 4 for
more details.
User Access
Username and password required for user access.
Users can be created with admin access or
non-admin access.
Supports multiple user accounts with configurable
area access and permission levels per user.
Supports up to 20 concurrent users and up to
10,000 user accounts.
Supports user authentication against an LDAP server.
Lighting Control
Supports up to 100 Vive Hubs.
Monitor current status of areas.
Rename areas.
Enable load shedding to respond to demand
response events.
Adjust area lighting levels.
Access area and device settings to adjust
functionality.
Occupancy
View the occupancy status of areas that contain
occupancy sensors.
Access area and device settings to adjust
functionality.
Scheduling
Create and edit scheduled events.
Events can be scheduled to occur at fixed times or
relative to sunrise/sunset.
Note: Vue does not support custom fade rates.
Device-level setting is not available in Vue; events can
only be set by area-level.
Energy Management
View energy and power usage graphs by system,
floor, or area.
System Requirements
Vive System version 1.7 or later is required.
Access to the Vive Vue software from multiple
devices (e.g., laptops, desktops, tablets) on the
network requires a Windows physical or virtual server
(Q-Manager). See the following specifications for
Q-Manager server requirements (to view online, click
on the individual model numbers below):
QS-A-CMP-SBO-0: Customer provided server
QS-A-CMP-VSBO-0: Customer provided virtual
server
Q-Manager does not require a connection to the
Internet in order to use Vive Vue.
For remote start-up, an Internet connection with
secure remote access is required. To more quickly
respond to any future service needs, Lutron highly
recommends configuring remote access to the
Q-Manager server.
In order to use Vive Vue, Vive hubs should be
configured with static IP addresses or with Reserved
DHCP addresses.
For more information on server and network
configuration, see www.lutron.com/ViveVueITGuide
Protocols Enabled
• ICMP
• mDNS
2
Vive Vue Management Suite Vive License
3691067e 3 10.02.19
Vive
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Browser Requirements for ViveVue
Vive Vue can be accessed on most devices running
an HTML5 compliant browser.
Recommended configurations:
Device Browser
iPad Air, iPad Mini 2+, or
iPad Pro
Safari (iOS 11 or 12)
WindowsR laptop,
desktop, or tablet
Google ChromeR Version 49
or higher
Note: For ports used to access the Vive hub, see Lutron
specification submittal 369902 at www.lutron.com
Vive Vue Reporting Features
Vive Vue is able to log historical data and add the
following capabilities to the Vive system:
Logging of calculated or measured energy usage for
lighting loads (depending on hardware). Check load
control specification submittal for further details.
Energy reports allow the user to gather historical
information about the buildings energy and power
usage.
Energy reports can show a comparison of cumulative
energy used over a period of time for one or more
areas in the system.
Data is stored in 15 minute intervals for up to
2 years.
Data is stored in hourly intervals for up to 10 years
(depends on configuration
Space Utilization Reports for Entire
Building or Areas
Vive Vue is able to record and analyze occupancy sensor
data and provide reports that allow facility teams to:
Understand when and how often spaces are
occupied.
Maximize the usage of the existing floorspace by
re-purposing unused spaces.
Make smarter decisions on the types of spaces to add
when expanding or re-purposing building real estate.
Improve the efficiency of building operations (such as
cleaning and maintenance) by scheduling activities
during times of low occupancy.
Track the percentage of areas with sensors that are
currently occupied.
View occupancy history using charts and bar graphs.
Create custom occupancy history reports for
selected areas, floors, etc.
Filter data by working hours or non-working hours
Define the time range of working hours.
View space utilization data on the Vive Vue graphical
floorplan.
Specifications
The resolution of occupancy data is determined by
the occupancy sensor timeout. Default occupancy
sensor timeout values are:
Lutron Radio Powr Savr wireless XCT occupancy
sensors – 15 minutes
Vive integral fixture sensors – 15 minutes
PowPak fixture sensor – 15 minutes
Ports Used
Traffic Port Type Connection Description
Outbound
80 TCP Ethernet
Used to access the
Vive Vue webpage
443 TCP Ethernet
Used to access the
Vive Vue webpage
5353 UDP Ethernet
Used to discover the
Vive Hub via mDNS
Inbound
80 TCP Ethernet
Used to discover the
Vive Hub when mDNS
is not available
8081 TCP Ethernet
Used to communicate
with the Vive Vue server
8083 TCP Ethernet
Used to communicate
with the Vive Vue server
8444 TCP Ethernet
Used to communicate
with the Vive Vue server
5353 UDP Ethernet
Used to discover the
Vive Hub via mDNS
3
Vive Vue Management Suite Vive License
3691067e 4 10.02.19
Vive
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Floor Plan Requirements
Lutron requires one electronic drawing per floor of
the system (provided by the customer) prior to
software installation to create the Vive Vue navigation
images. All drawings need to be in .dwg, .pdf, or .png
format. If the drawings are provided after the date of
software installation, additional fees will apply for the
additional services needed to add the drawings into
the system at a later time. An example of a Vive Vue
navigation image is shown in Figure 1 below.
Multiple hubs can be associated with a single floor/
drawing, but a given hub cannot be assigned across
more than one floor/drawing.
If drawings are not provided, or if drawings do not
meet requirements above, a non-graphical list of
areas will be used. These can be organized by floor.
In addition to the drawings, Lutron requires the
contact information of the individual who is authorized
by the owner to make any decisions regarding the
design and functionality of the images shown in Vive
Vue.
Figure 1 - Typical Vive Navigation Image
)Lutron, Lutron, GRAFIK Eye, Vive and Quantum are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
Q-Manager, Radio Powr Savr and Vive Vue are trademarks of Lutron Electronics Co., Inc.
iPad Air, iPad Mini, iPad Pro and Safari are trademarks of Apple Inc. registered in the U.S. and other countries.
Google and Chrome are registered trademarks of Google Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
iOS is a trademark of Cisco in the U.S. and other countries and is used under license.
The VIVE-VUE license covers the inclusion of
floorplan drawings in the state that they are
provided to Lutron by the customer. Lutron can
provide additional file cleanup services to improve
the readability and aesthetics of the drawings
(such as removing unwanted electrical wiring
details). This service can be ordered using the
model number: LSC-FP-EDIT.
4