Fillable 369-428e English PowPak Relay Module with Softswitch

Fill Online, Printable, Fillable, Blank 369-428e English PowPak Relay Module with Softswitch Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369-428e English PowPak Relay Module with Softswitch

On average this form takes 11 minutes to complete

The 369-428e English PowPak Relay Module with Softswitch form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 1 01.23.12
PowPak
™
Relay Module with Softswitch®
The PowPak
™
Relay Module with Softswitch® is a radio frequency (RF)
device that uses Lutron patented Softswitch
® technology to control up
to 16A of general-purpose load based on input from Pico
® controls
and Radio Powr Savr
™
occupancy and daylight sensors. An optional,
low-voltage dry contact closure output is available to communicate
occupancy status to 3rd-party systems such as HVAC controllers.
Communication with RF input devices, such as Pico
® controls and
Radio Powr Savr
™
sensors, is accomplished using Lutron Clear
Connect
™
RF Technology.
Features
•Softswitch
®: Lutron patented technology prevents arcing of relay
contacts, extending product lifetime
•Variousoperatingvoltagesavailable—refertomodelnumberchart
below for details on voltage requirements
•Capableofswitching16Aofgeneral-purposeloads
•Optionallow-voltagedrycontactclosureoutputprovidesintegration
to building management systems, HVAC, VAV, etc.
•ReceiveswirelessinputsfromuptoninePico® controls, six Radio
Powr Savr
™
occupancy/vacancy sensors, and one Radio Powr Savr
™
daylight sensor
•UtilizesLutronClearConnect
™
RFTechnology—refertomodel
number chart below for frequency band data
•Mountstoajunctionboxthroughastandardhalf-inch(NPTtradesize)
knockout
•Complieswithrequirementsforuseinacompartment
handlingenvironmentalair(plenum)perNEC® 2011 300.22(C)(3)


Description Model Number Operating
Voltage
Frequency Band Region
PowPak
™
Relay Module
with Softswitch
®
RMJ-16R-DV-B 120/277 V~ 431.0–437.0MHz U.S.A.,Canada,
Mexico
RMQ-16R-DV-B 220 -240 V ~
433.05–434.79MHz Hong Kong
RMM-16R-DV-B 220 -240 V ~
868.125–868.475MHz
China and
Singapore
PowPak
™
Relay Module
with Softswitch
® and
Occupancy-StatusCCO
RMJ-16RCCO1-DV-B 120/277 V~ 431.0–437.0MHz U.S.A.,Canada,
Mexico
RMQ-16RCCO1-DV-B 220 -240 V ~
433.05–434.79MHz Hong Kong
RMM-16RCCO1-DV-B 220 -240 V ~
868.125–868.475MHz
China and
Singapore
NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 2 01.23.12
Specifications
Regulatory Approvals
RMJ- models only
•ULListed
•UL2043PlenumRated
•FCCapproved.ComplieswiththelimitsforaClassB
device, pursuant to Part 15 of the FCC rules.
•CSAandIC
•COFETEL
•NOM
Power
•Operatingvoltage:
RMJ- models 120 /277 V ~
50 / 60Hz
RMQ- models 220-240 V~
50 / 60Hz
RMM- models 220-240 V~
50 / 60Hz
System Communication
•
OperatesusingClearConnect
™
RF Technology
for reliable wireless communication; refer to model
number chart on page 1 for band frequency details
•RFrangeis30ft(10m)
Environment
•Ambientoperatingtemperature:32°Fto131°F
(0°Cto55°C)
•0%to90%humidity,non-condensing
•Forindooruseonly
Softswitch®
•PatentedSoftswitch® circuit eliminates relay arcing at
mechanical contacts
•Extendsrelaylifetoanaverageof1millioncycles
•Outputisnon-latching
Load
•Maximumload:16Ageneralpurpose.Nominimum
load requirements.
•Loadtypesinclude(butarenotlimitedto):
Incandescent,MLV,ELV,Resistive,Inductive,
Magneticuorescent,Electronicuorescent
•Motorrating:
RMJ- models 0.5 HP (120V~), 1.5 HP (277V~)
RMQ- models 1.5 HP (220-240V~)
RMM- models 1.5 HP (220-240V~)
Key Design Features
•LEDstatusindicatorshowscurrentloadstatusand
provides programming feedback
•Powerfailurememory:Ifpowerisinterrupted,
connected loads will return to the previous level prior
to interruption
•DaylightingcanbeoverriddenbypressingtheON
button on any associated Pico®
– Daylighting will be re-enabled after 2 hours or after
the area becomes unoccupied
Contact Closure Output (CCO version only)
•Providesoccupancystatusto3rd-partyequipment
such as building management systems, HVAC, and
VAV controllers
•Providesbothnormallyopen(NO)andnormally
closed(NC)drycontacts
•Maintainedoutputtype
•CCOterminalsaccept20to16AWG(0.5 to 1.5 mm
2
)
solid or stranded wire
•Outputislatching
•Notforvoltagesgreaterthan24V
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
•TheCCOisnotratedtocontrolunclamped,
inductiveloads.Inductiveloadsinclude,butarenot
limited to, relays, solenoids, and motors. To control
these types of equipment, a flyback diode must be
used (DC voltages only). See diagram below. For
moreinformation,pleaseseeApplicationNote#434
(p/n 048434).
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 3 01.23.12
Test
System Diagram
Radio Powr Savr
™
OccupancySensor(upto6)
Radio Powr Savr
™
Daylight Sensor (up to 1)
Pico® Control (up to 9)
To 3rd-Party
Equipment
To power source
and load
Wiring Diagram
HOT
NEUTRAL
SWITCHED HOT
LOAD
COM
NO
NC
To 3rd-Party
Equipment
Occupancy-Status CCO
(RM__-16RCCO1-DV-B only)
Junction Box
Black
Red
White
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 4 01.23.12
Wiring Diagram
Conduit Nut
White
(Neutral)
Black
(Hot)
Red
(Switched Hot)
NOTE:WhenwiringCCOto3rd-partysys-
tems,use20to16AWG(0.5to1.5mm
2
) solid
or stranded wire.
To 3rd Party Equipment
To Load
NO
(NormallyOpen)
NC
(NormallyClosed)
COM
(Common)
PowPak
™
InstallationInsideJunctionBox
(Dimming Module RMJ-ECO32-DV-B shown)
Antenna
BOXABOXB
Insomeapplications,aPowPak
™
modulecanbeinstalledinsidea4inx4in(102mmx102mm)junctionbox.For
informationabouthowtoperformthisinstallation,pleaseseeApplicationNote#423(p/n048423).
CCOoperationaffectedonlybyassociatedoccupancyorvacancysensors.
Room Occupied: NO=CloseNC=Open
Room Unoccupied: NO=OpenNC=Close
Input Voltage
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 5 01.23.12
Dimensions
Dimensions are shown as: in (mm)
Range Diagram
•ContactLutronrstforapplicationsusingfoil-backedormetallicceilingtiles.
1.25
(31.8)
2.82
(71.6)
3.42
(86.9)
3.94
(100.1)
All Wireless Transmitters must be installed within
30 ft (10 m) of the PowPakTM Relay Module.
30 ft (10 m)
Maximum
40 ft (12 m)
30 ft (10 m)
PowPak
™
Relay Module
Installincenterofroomto
maximizeRFcoverage.
Pico®
Wireless
Transmitter
Half-inch
NPTTradeSize
Radio Powr Savr
™
Occupancy Sensor
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module with Softswitch® Energi TriPak
™
Series Wireless Lighting Control
369-428e 6 01.23.12
Default Operation
Transmitting Device Transmitted Command Softswitch®
Relay Default Action
CCO Default Action
Pico
® On Close NoAction
Off Open NoAction
Raise NoAction NoAction
Lower NoAction NoAction
Preset Close NoAction
Radio Powr Savr
™
OccupancySensor
Occupied Close NO=Close,NC=Open
Unoccupied Open NO=Open,NC=Close
Radio Powr Savr
™
Vacancy Sensor
Occupied NoAction NO=Close,NC=Open
Unoccupied Open NO=Open,NC=Close
Radio Powr Savr
™
Daylight Sensor
Ambient Light Below
Target Level
Close NoAction
Ambient Light Above
Target Level
Open NoAction
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369-428e English PowPak Relay Module with Softswitch

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 6 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document