Fill - Free fillable 085318 Radio Window sensor for regions other than North America PDF form

MULLION MOUNT (pair)

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 1 02.17.15

Radio Window sensor

(for regions other than North America)

Lutron's Radio Frequency enabled Radio Window sensor

enhances the performance of Lutron® shading systems

by working at the window level to communicate current

exterior light conditions to the system. This enables

shades to respond appropriately, improve comfort, and

enhance the system's energy saving potential. The sensor

maximizes natural daylight, available views, and occupant

comfort when shadows are cast as well as when dark

cloudy or bright sunny weather conditions prevail. The

battery powered sensor features easy installation and low

maintenance costs.

Features

• Works in Quantum® systems with HyperionTM

solar-adaptive shading technology, opening shades

during cloudy conditions or in response to shadows from

neighboring buildings, and lowering them in overly bright

conditions

• Operates in HomeWorks® QS systems, allowing for

easily programmable light-level thresholds that trigger

conditional logic events or system presets to control

lights and/or shades

• Maximizes exterior views and occupant comfort

• Simple setup in Quantum® or HomeWorks® QS software

• Software enables the ability to adjust thresholds,

timeouts and shade movement frequency

• Light range 0–107,000 Lux (0–10,000 fc)

• Uses Lutron’s Clear Connect® technology

• Front accessible buttons make addressing easy

• Small form factor allows it to blend in with surroundings

• 7 - 10 year typical battery life reduces maintenance costs

• RoHS compliant

• Works with tinted and reﬂective glass surfaces

• Multiple mounting methods available for various surfaces

Conﬁguration

QSM

Quantum Hub

QS Link

Status

Program

LU T RON

Mullion Mount Sensor Pair

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 2 02.17.15

Speciﬁcations

Regulatory

Lutron® Quality Systems Registered to ISO 9001:2008

Standards

LRF2-

• FCC certiﬁed (USA)

• IC certiﬁed (Canada)

• COFETEL (Mexico)

LRF3-

• CE Marked (European Union)

LRF4-

• SRRC Type Approved (Mainland China)

• iDA Registered (Singapore)

LRF7-

• FCC certiﬁed (Hong Kong)

Power / Performance

• Operating voltage: 3 V-

• Operating current: 7 µA

• Requires one CR 2450 lithium battery (included)

• 10-year power failure memory (settings are stored during

power loss)

Environment

• Temperature: 54 ºF to 122 ºF (12 ºC to 50 ºC)

• For indoor use only

• Relative humidity: < 90% non-condensing

Communication

• Radio Window sensors communicate to a Quantum® or

HomeWorks® QS system only through a QSM

• A QSM can receive signals from any combination of up

to 10 Radio Window sensors (window mount counts

as 1, mullion mount counts as 2), or Radio Powr SavrTM

daylight sensors

• In Quantum® systems, Radio Window sensors only

provide data for the control of window shades on the

same ﬂoor as where the sensors are mounted

Range

• QSM must be located within 60 ft (18 m) line of sight,

or 30 ft (9 m) through walls of a sensor

NOTE: The 2 signals from a mullion mount sensor

pair must be assigned to the same QSM

Compatible Systems

• For use with Quantum® or HomeWorks® QS

systems only

• Contact Lutron at www.lutron.com for frequency

or channel code compatibility with your particular

geographic region, and for integrating with other

Lutron shade and lighting products

MULLION MOUNT (pair)

Model Number

LRFX - SSM -XX

Frequency / Channel Codes

2 = 431.0 – 437.0 MHz (US, Canada, Mexico)

3 = 868.125 – 869.850 MHz (Europe)

4 = 868.125 – 868.475 MHz (China and Singapore)

7 = 433.05 – 434.79 (Hong Kong)

Color Code

Frequency / Channel Code

Dimensions

1.6 in

(41 mm)

0.7 in

(17 mm)

LENS

NOTE: Sensor

lens is always

white.

Color Code

WH = White

BL = Black

BZ = Bronze

CLA = Gray

Custom colors are available and may result in

additional lead time and cost.

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 3 02.17.15

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 4 02.17.15

Planning Sensor Layout Based on Conditions

When determining sensor layout, each ﬂ oor of each facade must be individually evaluated and planned. No single

sensor layout approach will work for every building, and many buildings will require different sensor layouts for

different façades on different ﬂ oors. The following guidelines will help you plan sensor layout for each facade on each

ﬂ oor of your building.

For Typical

Performance

Place one sensor*

every 30 linear feet of

façade, or every 1 - 2

shade groups

No exposure to

direct or reﬂ ected

sunlight...

For Highest

Performance

Place one sensor*

every 10 linear feet of

façade, or every 1 - 2

windows

No exposure to

shadows...

How many sensors are needed?

Example: Several

neighboring buildings

of various sizes cast

shadows on this ﬂ oor

of this façade

Example: A single

neighboring building

of comparable size

casts one wide

shadow on this ﬂ oor

of this façade

This is a performance decision. Sunlight and

shadow conditions can vary greatly from building to

building, ﬂ oor to ﬂ oor, and façade to façade. The

information here is offered as a general guideline.

See Façades with ONE Sensor under Planning Shade

Alignment and Grouping on the following page.

See Façades with MULTIPLE Sensors under Planning

Shade Alignment and Grouping on the following page.

Examples:

• Lower ﬂ oors in a

dense cityscape

• Windows with

awnings, overhangs

or side-blinds

designed to eliminate

all direct sunlight

Examples:

• Upper ﬂ oors of a

tall building

• Façades with no

neighboring

construction or

shadow-casting

objects

Plan ONE sensor* per façade, per ﬂ oor where

either of the following conditions prevails:

Plan MULTIPLE sensors* per façade, per ﬂ oor

where there is exposure to both direct sunlight

and shadows:

Fewer sensors More sensors

NOTE: If more speciﬁ c sensor placement assistance is needed, contact Lutron Shading Quotes for information

about the availability of a shadow study.

Sensor refers to a window-mount sensor or a mullion-mount sensor pair

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 5 02.17.15

Planning Shade Alignment and Grouping

Façades with

ONE sensor:

Façades with

MULTIPLE sensors:

Alignment option 2: Always Aligned

Alignment option 3: Independent

Alignment option 1: Smart Adaptive (recommended)

What is it?

Exclusive Lutron

® technology which enables shades in the same façade

to share sensor data and intelligently adapt grouping to achieve the best

possible balance of daylight autonomy and hembar alignment

Why choose it?

To achieve the best balance of daylight autonomy and exterior aesthetic

What is it?

Shades in the same façade will share sensor data to always maintain

alignment

Why choose it?

To prioritize exterior aesthetic above all else

What is it?

Shades in the same façade operate independently in response to indi-

vidual sensor data

Why choose it?

To prioritize daylight autonomy above all else

Alignment method: Always Aligned

What is it?

Shades in the same façade will all use the data from one sensor to

always maintain alignment

Window-proﬁ le view

of mounted left sensor

Interior

Mullion

Window

Glass

Unobstructed

View

Sensor

mounted

close to

glass

MULLION

NOT

GLASS

Obstructed View

MULLION

GLASS

Unobstructed View

Choose mounting locations where the exterior view is

unobstructed, and ﬁ xed building features, window louvers,

etc., do not cast persistent shadows

Sensors must have an unobstructed view through the window

glass; in locations where there is framing between the mullion

and the glass, mullion-mount sensors cannot be used

MULLION

NOT

GLASS

Obstructed View

MULLION

GLASS

Unobstructed View

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Window sensor LRFX-SSX-XX

085318 Rev B 6 02.17.15

Mounting on Mullion (LRFX-SSM-XX)

• Flush mount to window mullion near top of window, as close to the glass

as possible, ensuring the exterior view is not obstructed

• Ensure the shade fabric does not come between the sensor and the

window, and does not physically interfere with the sensor

• Mount to mullion using included double-sided adhesive (aluminum mullions

only), or fasten to other mullion surface material using a #4 ﬂ at-head screw

of appropriate length for the material thickness

• Mount sensors on opposite mullions of each shade group

• Ensure the arrow points directly toward the window glass

• Do not position the Radio Window sensor on a skylight, near an indirect

lighting ﬁ xture, or below any object casting a shadow on the sensor

• Position the Radio Window sensor at a height that is accessible using a

typical step ladder, (10 ft / 3 m or lower), in a location where it is unlikely to

be touched, moved, or interfered with by the building's occupants

• Operating and performance speciﬁ cations are based on mounting sensors

on mullions at 90° to the window glass; contact Lutron prior to mounting

on mullions at angles other than 90°

Controlling multiple shades with 1 sensor pair

Controlling 1 shade per sensor pair

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

085318 Radio Window sensor for regions other than North America

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank 085318 Radio Window sensor for regions other than North America Form

Related forms

Fillable 085318 Radio Window sensor for regions other than North America

Fill Online, Printable, Fillable, Blank 085318 Radio Window sensor for regions other than North America Form

Related forms

First 20 documents completely FREE!