Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369-143 L 6 03.01.12
RF Local ControlsMaestro WirelessR Designer-style: Maestro
R
Specifications
Regulatory Approvals
• UL Listed.
• CSA Certified.
• FCC Approved. Complies with the limits for a
Class B digital device, pursuant to Part 15 of the
FCC Rules.
• Industry Canada Certified.
Power
Operating voltage:
120 V~ 50/60 Hz
277 V~ 50/60 Hz (MRF2-6ANS-277,
MRF2-8S-DV, MRF2-F6AN-DV)
Key Design Features
Dimmers
• On a single-tap, lights fade UP or DOWN.
• On a double-tap, lights go to full ON.
• When ON, press and hold to engage 20-second
fade to OFF.
• Light levels can be fine-tuned by pressing and hold-
ing the dimming rocker until the desired light level is
reached.
• Two-wire dimmers available.
Switch
• On a single-tap, lights turn ON or OFF.
• Two-wire switches available.
All RF Local Controls
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with IEC
61000-4-2.
• Tested to withstand surge voltages without dam-
age or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Controls always operate locally and do not require
system control.
• Power failure memory: should power be
interrupted, the control will return to its previously
set level prior to the interruption when power is
restored.
• Uses conventional 3-way and 4-way wiring.
• Multiple location control from Dimmer/Switch and
up to 9 Companion Dimmer(s) / Switch(es).
• Use LutronR Designer (ClaroR
and Satin ColorsR)
wallplates or designer-style wallplates from other
manufacturers. Wallplates are sold separately.
• Lutron ClaroR and Satin ColorsR wallplates snap
on with no visible means of attachment.
• Requires a 1-gang U.S. wallbox. 3
1
⁄2 in (89 mm)
deep recommended, 2
1
⁄4 in (57 mm) deep
minimum.
• Green indicator lights.
System Communications
and Capacity
• Maestro WirelessR controls communicate with the
PicoR wireless controls and Radio Power SavrT
sensors through radio frequency (RF).
• Maestro WirelessR local controls must be located
within 60 ft (18 m) line of sight or 30 ft (9 m)
through walls, of Radio Power SavrT sensors.
• Maestro WirelessR local controls must be located
within 100 ft (30 m) line of sight or 30 ft (9 m)
through walls, of a PicoR wireless control.
• Up to 10 Maestro WirelessR controls can be
configured to work together.
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity,
non-condensing. Indoor use only.
