HOW TO THOROUGHLY
DISINFECT AND CLEAN
YOUR VIEWBOARD
®
INTERACTIVE FLAT
PANEL DISPLAY
ViewBoard
®
The content provided herein is for convenience of reference only and are subject to change without notice. ViewSonic assumes no liability for any errors or omissions in
the information displayed. ViewSonic shall not be liable for any data loss or damages caused as a result of human factors, acts of God, equipment damage or any damages
caused or failure of other equipment, whether incidental, consequential or otherwise. ViewSonic makes no representation or warranties, either expressed or implied, with
respect to the content hereof and specically disclaims any warranty of merchantability or tness for any particular purpose. Copyright (C) 2020 ViewSonic Corporation.
All Rights Reserved. [20VWB_EDU1158a]
If you own a ViewBoard
®
interactive at panel display, chances are hundreds of people have put their hands on it.
In order to prevent the transmission of germs and diseases, it’s important to wash your hands thoroughly, andregularly
clean your display.
Here's how to quickly and eciently clean and disinfect your interactive at panel display so that you and the people around
you can stay healthy.
•
Take a clean, soft, lint-free cloth
and gently wipe down the case to
remove dust and other particles.
•
If your case is still dirty, apply a small
amount of 70% IPA solution to your
cloth and gently wipe down the case.
Alternatively, you can also use a 70%
IPA wipe (such as Clorox).
•
Take a clean, soft, lint-free cloth
and gently wipe down your screen
to remove dust and other particles.
•
If your screen is still dirty, apply
a small amount of 70% isopropyl
alcohol (IPA) solution to your cloth
and gently wipe down the exterior
of your display. Alternatively,
you can also use a 70% IPA wipe
(such as Clorox).
•
Make sure the device is powered o
and the power cable is unplugged
from the outlet.
•
NEVER spray or pour any liquid
directly onto your screen or case.
Doing so could irreparably
damage your device.
BEFORE YOU START CLEANING THE SCREEN CLEANING THE CASE
Whenever possible, try using a 70 - 75% IPA solution rather than a more concentrated solution (such as 90%
to 99%). While stronger solutions might give the appearance of safety, 70 – 75% IPA solutions are more eective
at penetrating the membrane of viruses such as COVID-19.
Solutions that are stronger than 90% require longer times for disinfection and may enable spores to lie dormant
without being killed.
Always remember to wash your hands before and after using an interactive at panel display.
Use 70-75%
IPA Solution
For more information contact your ViewSonic representative today.
ViewSonic Sales: (888) 881-8781 or salesinfo@viewsonic.com
