Fillable Lutron electronics EGRX-PRO 4-Scene

Fill Online, Printable, Fillable, Blank Lutron electronics EGRX-PRO 4-Scene Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics EGRX-PRO 4-Scene

On average this form takes 5 minutes to complete

The Lutron electronics EGRX-PRO 4-Scene form is 3 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 21 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
egrx-7 12.9.03
Wallstations
European Style
®
EGRX-PRO-__-__
4-Scene with Off, Raise/Lower, and
Infrared Receiver Programming Wallstation
Status LEDs
Scene Selection
Buttons
Off/Infrared
Receiver
Master
Raise/Lower
Color and Finish Codes
Do not change
DIP Switches 7-10!
Lutron sets these
at the factory.
Field Selected Functionality
Scenes 1 to 4 Scenes 1 to 8
Scenes 5 to 8 Scenes 5 to 12
Scenes 9 to 12 Scenes 9 to 16
Scenes 13 to 16 Scenes 13 to 16/1 to 4
Scene selection buttons and
GRX-IT 4-Scene Wireless
Remote Control activate:
GRX-8IT 8-Scene Wireless
Remote Control activates
DIP Switch
Settings
5 6
Description
Allows the user to set scenes for a
complete system of GRX-3500 or GRX-
4500 units using a PDA at the wallstation.
When used with a PALM PDA and
available software, the user is able to:
• Select scenes 1-16 and off on any GRX
unit in the system.
• Raise or lower any zone in the system.
• Save the new zone levels as the current
scene.
For more information on the software
required contact Lutron or visit
www.lutron.com.
When used without a PALM PDA, the
wallstation offers the standard functionality
and benefits of the EGRX-4S-IR wallstation.
• Scene selection buttons activate scenes 1
to 4, 5 to 8, 9 to 12, or 13 to 16 depending
on settings of DIP switches 5 and 6.
• Status LEDs show which scene is selected.
• Off button turns lights off.
• Infrared receiver allows a GRX-IT 4-Scene or
GRX-8IT 8-Scene Wireless Remote Control
to select and adjust scenes.
• Master raise/lower button brightens or dims
the selected scene.
Mounts in UK/German wallbox. In the U.S.,
Lutron supplies a UK Wallbox (P/N 241-683)
with the Wallstation.
Program scene intensities using a PALMTM PDA.
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
egrx-15 12.9.03
Wallstations
European Style
®
1
234
5
6
1.4" (35mm)
2.4"
(60mm)
6mm
(1/4”)
25mm
(1”)
86mm
(3 3/8”)
86mm (3.38”)
Color and Finish Codes
Standard
Ship in 48 hours*
Black BL
White WH
Bright Brass BB
Bright Chrome BC
Satin Brass SB
Satin Chrome SC
Matte Finishes
Ship in 3 to 4 weeks
Ivory IV
Beige BE
Gray GR
Brown BR
Metal Finishes
Ship in 4 to 6 weeks
Bright Nickel BN
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum
Ship in 4 to 6 weeks
Clear CLA
Black BLA
Brass BRA
Engraving E
Wallbox Included NA
Custom Controls, color matching,
and engraving available – ship in
4 to 6 weeks. Pricing may vary
depending on finish.
Dimensions
Front View
Mounting
Power
Operating voltage: Low-voltage Type Class 2
(PELV), 12/24 V Direct Current
Key Design Features
• Meets IEC 801-2. Tested to withstand 15kV
electro-static discharge without damage or
memory loss.
• Faceplate snaps on with no visible means of
attachment.
System Communications and Capacity
• Low-voltage Type Class 2 (PELV) wiring
connects Wallstations to Control Units and
other components.
• Up to 8 Control Units and up to 16 total
Wallstations and/or Control Interfaces may
be linked for a total of 24 control points.
Terminals
Capacity: Accept up to two 1.0mm
2
(#18 AWG) typical.
Environment
0-40°C (32-104°F). Relative humidity less
than 90% non-condensing.
* 48 hours for 4S, 2B-SL, 4SIR-8S, 8S-IR.
All others – 2 weeks.
Side View
Back View
Terminals for PELV
(Class 2) Wiring
UK or German wallbox
In US, shipped with Wallstation
(P/N 241-683)
DIP
Switches
Faceplate
Specifications
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
egrx-16 12.9.03
Wallstations
European Style
®
D3
4
21
2 # 18 AWG (1.0 mm
2
)
twisted, shielded pair
from terminals 3 to 3
and 4 to 4
#18 AWG (1.0 mm
2
)
2 #12 AWG (2.5 mm
2
)
Drain/Shield
DIP Switches
• Set DIP switches 1-4 to give the Wallstation
a unique system address from 1 to 16.
• Set additional DIP switches (if any) to specify
function as shown on the first page of the
Wallstation’s Specification Submittal.
DIP Switch Settings
Address
1234
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Reserved for GRX-PRG, if present on link.
Low-Voltage Class 2 (PELV) Wiring
• Use low-voltage Class 2 (PELV) wiring to daisy-chain
Wallstations to Control Units and other
components.
• Make connections inside the wallbox or in a
switch/junction box with a maximum wire length of 8
feet (2.5m) from the link to the Wallstation.
NNoottee::
EGRX Wallstations have a “D” terminal for Drain.
Connect the Drain/Shield at this terminal.
When used with GRX-3000 Control Units:
• Two #18 AWG (1.0mm
2
) conductors for common
(terminal 1) and 12 V Direct Current (terminal 2). Ensure
that the terminal 2 connection is wired correctly. Refer
to GRX-3000 Specification Submittal.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for data
link (terminals 3 and 4).
When used with GRX-4000 Control Units:
• Two #12 AWG (2.5mm
2
) conductors for common
(terminal 1) and 24 V Direct Current (terminal 2). These
won’t fit in terminals. Connect as shown.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for data
link (terminals 3 and 4).
• Connect Drain/Shield as shown.
Do not connect to Ground (Earth) or Wallstation.
Connect the bare drain wires and cut off the outside
shield.
Wallstation Installation
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics EGRX-PRO 4-Scene

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 14 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document