Fillable 369482 ENG ELV Dimmer with Neutral Wire

Fill Online, Printable, Fillable, Blank 369482 ENG ELV Dimmer with Neutral Wire Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369482 ENG ELV Dimmer with Neutral Wire

On average this form takes 9 minutes to complete

The 369482 ENG ELV Dimmer with Neutral Wire form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369482b 1 08.31.2012
Wireless Lighting Control
ELV Dimmer with Neutral WireStanza®
Dimmers with Neutral Wire for Halogen,
Incandescent, ELV, or Interfaces
Description
The Stanza
® system is an easy-to-install and easy-to-use lighting
control system designed especially for hotel guest rooms and
similar applications. The system consists of wallbox dimmers,
wallbox switches, line-voltage wallbox keypads, low-voltage
interfaces, and lamp socket dimmers/switches. All of these
devices communicate via radio frequency (RF) within individual
guest rooms.
Stanza
® dimmers with neutral wire function much like standard
dimmers and switches and have an integral microprocessor,
allowing them to be incorporated into a complete lighting control
system. Stanza
® dimmers with neutral wire are useful in locations
where single circuits of lighting need to be dimmed and switched.
Stanza
® dimmers include a Front Accessible Service Switch
(FASS
TM) for safe bulb replacement.
Stanza
® dimmers with neutral wire can be used in conjunction
with some Lutron
® interfaces to control loads that are not
supported by non-neutral dimmers.
Features
• Allowslocaldimmingandswitchingcontrolofonezoneof
halogen, incandescent, ELV, or other loads controlled by an
interface.
• Lightlevelcanalsobeadjusted,ifaddressedaspartofa
Stanza® lighting control system, via an RF command from a
keypad or integration device.
• 3-wayoperationcanbeobtainedusingadimmerandakeypad.
• Screwterminalsandpush-inconnectionssimplifyinstallation.
• Shallowbackcovertakesuplessroominthewallbox.
• LargecontrolsaredesignedwithADAandUniversalDesign
considerations.
• Faceplatenotincluded;orderseparately.
SZ-5NE-XX
Shown with SZF-Z5-XX faceplate
XX = Color code
N = Neutral wire required
1
R
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369482b 2 08.31.2012
Wireless Lighting Control
ELV Dimmer with Neutral WireStanza®
Specifications
Regulatory Approvals
• ULListed
• NOM
• cULandIC
• FCC(ComplieswiththelimitsforaClassBdigital
device, pursuant to Part 15 of the FCC rules)
Load
• 5Wminimum,500Wmaximumhalogen,
incandescent,or500WELV(deratedifganged;
see derating chart)
• CompatiblewithLutron®interfaceGRX-PWM
• Donotinstalldimmertocontrolstandard
receptacles or motor-operated appliances. Contact
Lutron for dimmable receptacle solution.
Power
• Operatingvoltage:120V~ 50/60 Hz
• Requiresaneutralwireconnection.
Key Design Features
• Backlightofsliderglowsgreen;sectionofslider
track turns amber for programming indication.
• Adjustablemaximumlightlevelprovidesenergy
savings and extended bulb life.
• Powerfailurememory:whenpowerisrestored,
lights will return to the level set prior to the
interruption.
• Onasingletap,lightsalternatelyfadetopreset
level or turn off.
• Lightlevelcanbefine-tunedbymovingtheslider
up or down until the desired light level is reached.
• RequiresStanza® specific faceplate (order
separately).
• Requiresa1-gangU.S.wallbox:3.5in(89mm)
deeprecommended;2.25in(57mm)deep
minimum.
• CanbegangedwithotherStanza® controls or with
decorator controls using multiple-gang Stanza
®
faceplates.
System Communication and Capacity
• DimmerscommunicatewithotherStanza® system
components through radio frequency (RF) at
434MHz.
• MultipleRFchannelsandthousandsofsystem
addresses prevent interference between systems.
• Eachdimmercountsas1towardthebasicsystem
maximum of 31 RF devices (maximum RF devices
canbeincreasedto100ifanSZ-CI-PRGis
present in the system).
Environment:
• Ambientoperatingtemperature:32–104°F
(0–40°C).
• Maximum90%non-condensingrelativehumidity.
• Indooruseonly.
Warranty
• 1-yearlimitedwarrantystandard.2-yearparts
and labor warranty, with 8-year pro-rated parts
replacement on systems that include factory
startup.
Formoreinformation:
www.lutron.com/TechnicalDocumentLibrary/
Warranty_CommercialSystems.pdf
Color Codes
(Satin Colors
®)
Button Color Code
Biscuit BI
Eggshell ES
Merlot MR
Midnight MN
Sienna SI
Snow SW
Taupe TP
Contact Lutron for other available finish options.
2
R
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369482b 3 08.31.2012
Wireless Lighting Control
ELV Dimmer with Neutral WireStanza®
System Overview
Communication Notes
• Stanza
® RF devices must be located within 30ft
(9 m) of a Stanza
® RF device configured as a
repeater. Multiple devices configured as repeaters
may be necessary to provide adequate coverage.
• AnyStanza® RF device can be configured as a
repeater.
• Atotalof5devicesmaximumcanbeconfiguredas
repeaters.
• Devicesconfiguredasrepeatersmustbelocated
within 30ft (9 m) of another device configured as a
repeater.
• Stanza
® lighting controls cannot be controlled
wirelessly and Stanza
® keypads will not function
until they are addressed and programmed.
Feature
Basic System
(withoutSZ-CI-PRGpresent)
Advanced System
(withSZ-CI-PRGpresent)
Maximum devices 31 100
RS232 and/or Ethernet
interface capability
No Yes
PC required for device
replacement
No Yes
Dimensions
30 ft (9 m) max.
from repeater device
30 ft (9 m) max.30 ft (9 m) max.
from repeater device
Key
Dimmer Keypad
4.69 in
(119 mm)
2.6 in
(60 mm)
Front view Side view Back view
3.06 in
(77 mm)
1.8 in
(46 mm)
0.2 in
(5.1 mm)
Corner radius
x
4
1.12 in
(35 mm)
0.29 in
(7.5 mm)
Faceplate not shown in back view
3
R
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369482b 4 08.31.2012
Wireless Lighting Control
ELV Dimmer with Neutral WireStanza®
Ganging and Derating
Lutron® Stanza® faceplates are available in
single-gangandmultiple-gangversions.When
combining controls in a wallbox, derating is
required as indicated below.
Derated Loads for SZ-5NE
Position Maximum Rating
Single (no ganging)
500 W Incandescent;
500 W ELV
End of gang
450 W Incandescent;
450 W ELV
Middle of gang
400 W Incandescent;
400 W ELV
Mounting
Examples of Multiple‑Gang versions
End of gang
Middle of gang
Dimmer Faceplate adapter Faceplate
Locating post
Dimmer
mounting
screws
Faceplate
adapter
mounting
screws
Locating post
Locating hole
Locating hole
4
R
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369482b 5 08.31.2012
Wireless Lighting Control
ELV Dimmer with Neutral WireStanza®
Wiring
Single location installation only
Dimmer Operation
Important Notice
To replace bulb, power may be interrupted by pulling down the FASS
TM on the dimmer. For any procedure
other than routine bulb replacement, power must be disconnected at the main electrical panel.
Dimmer
Brass
Silver
Black
Green
Ground
Neutral
Light fixture(s)
Hot
120 V~ 50/60 Hz
Dimming Slider
Note: Load must be On for slider to affect
intensity
• Slideuptobrighten
• Slidedowntodim
Tapswitch
• TurnsloadOn/Off
Indicator Light in Slider Track
• Indicatorlightwithinlengthoftrackglowssoftly
green for ease of locating dimmer
• Trackendswillflashambertoindicate
programming/addressing mode
FASSTM
FASSTM facilitates safe bulb replacement by
interrupting electrical power flow from dimmer to
load without the inconvenience of disconnecting
power at the main electrical panel
• PullFASSTM down to interrupt electrical power
flow
• PushFASSTM up to restore electrical power flow
O
F
F
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369482 ENG ELV Dimmer with Neutral Wire

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 1 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document