by
Break Room | New Construction
ASHRAE 90.1-2013
Control Functionality
Occupant Enters:
Lights do not automatically turn on when an occupant enters the space; lights must be turned
on manually. Maximum light level is set to 80%. Controlled receptacles automatically regain power when
occupant enters.
When Occupied:
Manual: Occupant uses wall dimmer to set desired light levels for all lights.
Occupant Exits:
All lights automatically turn off 15 minutes after all occupants exit. 50% of all receptacles automatically turn
off 15 minutes after all occupants exit.
Add a Vive wireless hub to enable simple setup and re-zoning, system monitoring, timeclock
functionality, and advanced integration.
Symbol Model Number Description Qty
RMJS-8T-DV-B PowPak dimming module with 0-10 V 1
RMJS-20R-DV-B 20 A PowPak relay module
1
LRF2-VKLB-P-WH
Radio Powr Savr wireless corner-mount
vacancy sensor
1
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 1
PICO-WBX-ADAPT Pico wallbox adapter 1
Code Notes: For break rooms with daylight, include 0-10 V dimming module per zone and a daylight sensor.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
Line-voltage
wiring
Clear Connect
RF Communication
Low-voltage
wiring
© 06/2017 Lutron Electronics Co., Inc.
I
P/N 368-4608 REV B
Insert Model Number
Insert Description
Fixtuer
Insert
Qty