Fillable TD-135 Submittal Requirements for Tenant Improvement Alterations/Additions (City of Murrieta)

Fill Online, Printable, Fillable, Blank TD-135 Submittal Requirements for Tenant Improvement Alterations/Additions (City of Murrieta) Form

Use Fill to complete blank online CITY OF MURRIETA (CA) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

TD-135 Submittal Requirements for Tenant Improvement Alterations/Additions (City of Murrieta)

On average this form takes 16 minutes to complete

The TD-135 Submittal Requirements for Tenant Improvement Alterations/Additions (City of Murrieta) form is 5 pages long and contains:

  • 0 signatures
  • 8 check-boxes
  • 59 other fields

Country of origin: US
File type: PDF

U.S.A. forms for City of Murrieta

BROWSE CITY OF MURRIETA (CA) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
BUILDING & SAFETY DIVISION
Submittal Requirements for Tenant
Improvement Alterations/Additions
City of Murrieta – Development Services Department
1 Town Square, Murrieta CA 92562
Requirements
TD-135
September 2019
Visit our Website at http://www.murrietaca.gov/departments/cd/default.asp
SUBMITTAL REQUIREMENTS FOR TENANT IMPROVEMENT ALTERATIONS/ADDITIONS
This handout if designed for assistance in Tenant Improvement Plan Submittal to the Building and Safety Division.
Omission of the following shall be deemed an Incomplete Submittal and will not be acceptable for plan review.
The California Model Codes currently in effect are the 2016 California Codes, based on the 2015 International Building
Code (IBC), 2015 Uniform Plumbing & Mechanical Codes (UPC, UMC), 2014 National Electric Code (NEC), 2015
International Fire Code (IFC) and the 2016 California Energy Code and the 2016 California Green Building Standard Code
("Cal Green").
Submit four (4) complete sets of fully dimensioned
Architectural, Plumbing, Mechanical and Electrical
plans. All plans shall be on a minimum 18" X 24"
and a maximum 30" X 42" size bond paper.
CONSTRUCTION PLANS SHALL INCLUDE BUT NOT BE LIMITED TO:
Cover Sheet:
1. Vicinity Map
2. Parcel number(s) and Site Address
3. Business Name
4. Building data: Existing building Type of Construction, Sq. Ft. of leased area, leased area intended
use/occupancy, occupant loads, Building Code data: 2016 California Model Codes as based on the 2015 IBC,
2015 UMC and UPC, 2014 NEC, 2015 IFC and the 2016 California Energy Code, 2016 "Cal Green" Code and
whether the existing building is fully fire sprinkler protected building, or not etc.
5. List any flammable /combustible materials, chemicals, toxics or hazardous materials used or stored and total
quantities of each, including MSDS reports
6. Sheet Index
Plot Plans:
1.
North Arrow
2.
Building location and tenant leased suite location and adjacent uses
3.
Accessible parking/unload areas, curb ramps, exterior route of travel to the leased area entry door and at
least one route to the public right-of-away
Floor Plans:
1.
All wall lines to be indicated by double line
2.
Fully dimensioned and to scale (3/16 inch per foot minimum), 1/4 inch per foot preferred.
3.
Exit door locations, widths and direction of door swing
4.
Wall legend. Show walls as existing or new, with references to wall construction details indicating heights, framing
member size, spacing and material type, connections at top and bottom and top of wall lateral bracing method
5.
Show all fixed elements of constructions e.g. bathroom facilities, fixtures, cabinets, storage racks and/or
shelves
6.
Accessible features e.g. fixed customer service counters, including kitchen, dining or drinking bar counters, new
bathroom facilities, access to new areas, features and elements
Reflected Ceiling Plans:
If the leased area consists of existing ceiling, lighting and mechanical and no further alterations are proposed; then along
with the reflected ceiling plan, simply indicate the elements as "existing and to remain"
Section Views:
Walls and roof/ceiling finishes, complete occupancy separation and fire resistive construction if required, demising
walls etc. For new conditioned spaces, section views shall indicate wall heights and insulation locations for walls
and roof/ceilings.
Plumbing/Mechanical Plans:
1. System material types and sizes, waste/vent and potable water layouts or isometrics, plumbing fixture schedule,
etc.
2. HVAC (new or existing) equipment location, distribution layout material type and sizes fire/smoke control devices
and activation
3. Include a line of site detail showing new roof top equipment shielding
4. Gas line diagram, material type, sizes and load demand
Electrical Plans:
1. Interior Main Distribution single line diagram, panel schedule and load calculations, etc
2. Electric power and lighting plans, interior fixture schedule, illuminated exit signs and emergency
illumination (if applicable), or indicate as, "existing and to remain"
3.
Title 24 Energy Electrical requirements including multi-level switching arrangements and automatic
electrical lighting shut-off system
Structural Plan/Foundation/Floor/Ceiling/Roof Plan and Details:
1. Structural design justification of the existing roof framing for new mechanical equipment exceeding 300lbs
2.
Foundation supporting elements and connections, reinforcement, slab and footing details, etc
3.
Structural frame plan(s)
4.
T-Bar ceiling standard details and seismic restraints
Supplemental Information:
1.
Submittal to include two (2) copied sets of original shell building Title 24 Energy calculations or new 8.5' x 11" Title
24 Energy calculations or Energy calculations as for newly constructed conditioned space
2.
ENV or PERF (Envelope), MECH (Mechanical) for conditioned space as new construction or, as for an addition
including, LTG (Lighting) Energy Calculations for new lighting with required forms copied to the full size plan
sheets
3.
Separate submittals and permits are required for signs
4.
Fees are based on the City of Murrieta Adopted Fee Schedule
5.
Restaurant/Food establishments must obtain approval from the County Health Department/Food Division: and
the local water/sewer purveyor for grease waste interceptors
6.
All contractors/sub-contractors must show proof of State and City licenses and shall comply with Sec. 3800 of the
Labor Code regarding Workers Compensation
7.
Applicant shall obtain all required clearances and/or approvals from the appropriate water district(s) prior to
issuance of any building permits
BUILDING SAFETY DIVISION
Submittal Requirements for Tenant
Improvement Alterations/Additions
City of Murrieta – Development Services Department
1 Town Square, Murrieta CA 92562
Requirements
TD-135
November 2018
Visit our Website at http://www.murrietaca.gov/departments/cd/default.asp
Tenant Disclosure
for Certificate of Occupancy
If you are NOT doing work that requires a building permit, please provide two copies of a site plan
showing the building and suite location; and two floor plans of the existing leased space as-is.
•
Intended business use:
•
Business nam
e:
•
I
s
t
his
a new business in Murrieta? Yes
No
•
Address and suite number:
•
Leased sq. ft. area:
•
Number of employees:
•
Are you the first tenant to occupy this space? Yes
•
List
any
t
oxic
chemicals, flammable/combustible liquids or gases used or stored with MSDS
sheets and quantities of each below or on a separate attached sheet(s):
•
Are you making any improvements to the unit/suite or building other than painting, floor
covering or similar finish work; installing moveable cases, shelving or partitions greater than
5'9" tall?
Yes
No
•
Applicant shall obtain all required clearances and/or approvals from the appropriate water
district(s) prior to issuance of any building permits.
SIGNATURE:
DATE:
PRINT NAME:
Page 1 of 2
Rev. 10-18-17
South Coast Air Quality Management
District
21865 Copley Drive, Diamond Bar, CA 91765-4182
Air Quality Permit Checklist
South Coast Air Quality Management District (SCAQMD) developed this Air Quality Checklist as a screening
evaluation tool in the process required by California Government Code Section 65850.2. Please provide a
response to all questions on this checklist.
If you have any question or need assistance completing this checklist, please contact the SCAQMD’s Small
Business Assistance Office, and a representative will help you complete the information in the checklist.
SCAQMD may decline to issue this form due to lack of information from applicant.
NOTE: If there are any demolition or renovation activities that may disturb building materials, please contact the
Asbestos Hotline at 909-396-2336.
Section A - Operator/Business Information
1. Business Name:
2. Address:
___________________________________________ ______________________________ CA _________________
Street City Zip
3. Contact Name:
Telephone Number:
Title:
Email:
Section B - Facility Business Information/Business and Equipment Description
Please provide a detailed description of the business operations to be performed and equipment to be used at this location:
Section C - Checklist Questionnaire
Please respond to all questions as it relates to the business activities to be performed at this location. Will business
operations at this location:
1. Result in the release of air pollutants, including but not limited to, dust, fumes, gas, mist, odors, smoke, vapor, or
a combination of these to the atmosphere? Yes No
2. Result in the use of fuel-burning equipment including, but not limited to, boilers, generators, and internal
combustion engines? Yes No
3. Result in the use of hazardous materials, including but not limited to, chemicals, plastics, rubber, resins, solvents,
paints, and parts cleaners? Yes No
Page 2 of 2
Rev. 10-18-17
Section C - Checklist Questionnaire (continued)
4. Result in the use of an above or underground storage tank? Yes No
5. Consist of manufacturing, fabrication, finishing, or treatment of wood, metal or plastic products: Yes No
6. Result in the use of any of the equipment listed below: Yes No
Soldering Oven
Spray Booth
Storage of Acids/Solvents/Organic
Liquids/Fuels
Storage Silos (sugar, flour, etc.)
(Place an X on all that apply)
Abrasive Blasting Cabinet/Room
Air Conditioning Systems (containing > 50 lbs of refrigerant)
Application of Paints/Adhesives/Resins
Baghouse/Dust Collector
Bakery Oven (gas-fired)
Boiler/Water Heater (max. heat input = or > 1 million BTU/hr)
Charbroiler/Smoker
Coffee Roaster/Afterburner
Deep Fryer (excluding equipment located at eating establishments)
Dry Cleaning Equipment
Electrostatic Precipitator
Etching/Plating/Casting/Melting/Forging/Grinding/Cutting of Metals
Fermentation
Gasoline Storage & Dispensing Equipment
Internal Combustion Engine (rated > 50 bhp; e.g. back-up generator)
Mixing/Blending of Liquids and/or Powders
Molding/Extruding/Curing of Plastics
Pharmaceutical/Nutraceutical
Plasma/Laser Cutter
Printing/Coating/Drying
Production of Fumes/Dust/Smoke/Odors
Refrigeration Systems (containing > 50 lbs of refrigerant)
Section D - Business Self Certification
7. Preparer:
Title:
Signature:
Date:
Telephone Number:
I hereby certify by my signature above that, I am a duly authorized representative of the above-named business, and
that all information contained herein is true and correct.
SCAQMD
USE ONLY
Equipment:
Issued By:
Applicant has permit(s) from the SCAQMD:
Applicant has filed for permit(s) with the SCAQMD:
Applicant is exempt from permit requirements:
Applicant has complied with filing requirements of R222:
Based on the information provided, no equipment/process requiring air
quality permit or registration.
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

TD-135 Submittal Requirements for Tenant Improvement AlterationsAdditions (City of Murrieta)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 14 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document