Fillable Sg SG.qxp (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Sg SG.qxp (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Sg SG.qxp (Lutron Electronics, Inc.)

On average this form takes 19 minutes to complete

The Sg SG.qxp (Lutron Electronics, Inc.) form is 17 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 77 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-1 01.29.04
®
Wallstations
TM
Selects scene 1.
Selects scene 9.
Selects scene 13.
Selects scene 16 (all lighting full on).
Locks all other system controls.
Temporarily brightens selected zone(s).
Control Units act in combination; movable
wall open to make one large space.
Allows only temporary zone adjustment.
Preset scene settings are not affected.
Loops continuosly through scenes 5 to 16
using fade times entered at Control Units.
Entrance Wallstation
Scene Selection
Panic Wallstation
Fine Tuning
Single-Partition
Status Wallstation
Zone Lockout
Sequencing
Turns lights off.
Selects scene 10.
Selects scene 14.
Restores previous scene.
Disables lockout.
Temporarily dims selected zone(s).
Control Units act independently; movable
wall closed to make two spaces.
Disables zone lockout.
Turns sequencing off.
SG-2BN-___-___
2-Button Wallstation
Description
• Often used in entryways to turn lights on and off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Functionality can be selected in the field.
• Status LEDs indicate which button was pushed
last.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Invokes functions in just one Control Unit or group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, refer to the
seeTouch Ordering Guide (P/N 367-274) or visit
the website at www.lutron.com/seetouch.
Color and Engraving Codes
Field Selected Functionality
DIP Switches 8-10 are set at the factory. Do not change
switch 8 or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
Engraving
SG-2BN-WH-EGN
SG-2BI-WH-E00
(Insert version)
Off
LEDs
5 6 7
Top button:
Bottom button:
DIP Switch Settings
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-2 01.29.04
®
Wallstations
TM
SG-4BN-___-___
4-Button Wallstation
Color and Engraving Codes
Engraving
SG-4BN-WH-EGN
SG-4BI-WH-E00
(Insert version)
Description
• Used to select and adjust scenes in GRAFIK Eye
Control Units.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Scene selection functionality can be selected in
the field.
• Status LEDs indicate which scene is selected.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Selects scenes in just one Control Unit or a group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
Scene Selection Buttons
LEDs
Field Selected Functionality
DIP Switch Settings
5 6
Scene selection
buttons activate:
Scenes 1 to 4
Scenes 5 to 8
Scenes 9 to 12
Scenes 13 to 16
DIP Switches 7-10 are set at the factory. Do not change
switch 7, 8, or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-3 01.29.04
®
Wallstations
TM
SG-4NRLN-___-___
4-Scene with Off Wallstation
Off
Scene Selection Buttons
Color and Engraving Codes
SG-4NRLN-WH-EGN
SG-4SNRLI-WH-EOO
(Insert version)
Description
• Used to select and adjust scenes in GRAFIK Eye
Control Units.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Scene selection functionality can be selected in
the field.
• Status LEDs indicate which scene is selected.
• Off button turns all lights off.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Selects scenes in just one Control Unit or a group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
Off
LEDs
DIP Switches 7-10 are set at the factory. Do not change
switch 7, 8, or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
Field Selected Functionality
DIP Switch Settings
5 6
Scene selection
buttons activate:
Scenes 1 to 4
Scenes 5 to 8
Scenes 9 to 12
Scenes 13 to 16
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-4 01.29.04
®
Wallstations
TM
SG-4SN-___-___
4-Scene with Off and Raise/Lower
Wallstation
Description
• Used to select and adjust scenes in GRAFIK Eye
Control Units.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Scene selection functionality can be selected in
the field.
• Status LEDs indicate which scene is selected.
• Off button turns all lights off.
• Master raise/lower brightens or dims all lighting in
the selected scene.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Selects scenes in just one Control Unit or a group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch
..
Field Selected Functionality
Color and Engraving Codes
Off
SG-4SN-WH-EGN
SG-4SI-WH-E00
(Insert version)
Master Raise/Lower
Engraving
Off
LEDs
Scene Selection Buttons
DIP Switches 7-10 are set at the factory. Do not change
switch 7, 8, or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
DIP Switch Settings
5 6
Scene selection
buttons activate:
Scenes 1 to 4
Scenes 5 to 8
Scenes 9 to 12
Scenes 13 to 16
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-5 01.29.04
®
Wallstations
TM
SG-4SIRN-___-___
4-Scene with Off, Raise/Lower, and IR
Receiver Wallstation
Description
• Allows user to select and adjust scenes at the
Wallstation or by Wireless Remote Control.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Scene selection functionality can be selected in
the field.
• Infrared receiver allows infrared transmitters to
select scenes and raise/lower all lighting zones.
• Off button turns all lights off.
• Status LEDs indicate which scene is selected.
• Master raise/lower button brightens or dims all
lighting in the selected scene.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Selects scenes in just one Control Unit or a group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
Off/Infrared Receiver
Master Raise/Lower
Color and Engraving Codes
SG-4SIRN-WH-EGN
SG-4SIRI-WH-E00
(Insert version)
Engraving
LEDs
Scene Selection Buttons
Field Selected Functionality
Scenes 1 to 4 Scenes 1 to 8
Scenes 5 to 8 Scenes 5 to 12
Scenes 9 to 12 Scenes 9 to 16
Scenes 13 to 16 Scenes 13 to 16/1 to 4
Scene selection buttons and
GRX-IT 4-Scene Wireless Remote
Control activate:
GRX-8IT 8-Scene Wireless
Remote Control activates:
DIP Switch Settings
5 6
DIP Switches 7-10 are set at the factory. Do not change
switch 7, 8, or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
5
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-6 01.29.04
®
Wallstations
TM
SG-PRON-___ -___
4-Scene with Off, Raise/Lower, and IR
Receiver Programming
Description
Allows user to perform the following functions in a
system of GRX-3500 or GRX-4500 Control Units
using a PDA at the wallstation:
• Select scenes 1-16 and off on any Control Unit
in the system.
• Raise or lower any zone in the system.
• Save the new zone levels as the current scene.
For more information on the software required,
contact Lutron or visit www.lutron.com.
When used without a PALM PDA, the wallstation
offers the standard functionality and benefits of
the SG-4SIRN wallstation:
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Scene selection functionality can be selected in
the field.
• Infrared receiver allows infrared transmitters to
select scenes and raise/lower all lighting zones.
• Off button turns all lights off.
• Status LEDs indicate which scene is selected.
• Master raise/lower button brightens or dims all
lighting in the selected scene.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
OFF/Infrared Receiver
Master Raise/Lower
SG-PRON-WH-EGN
LEDs
Scene Selection Buttons
Program scene intensities using a PALM PDA.
DIP Switches 7-10 are
set at the factory. Do not
change switch 7, 8, or 9.
Switch 10 controls the
button backlight. Refer to
product installation guide
for more details.
Field Selected Functionality
Scenes 1 to 4 Scenes 1 to 8
Scenes 5 to 8 Scenes 5 to 12
Scenes 9 to 12 Scenes 9 to 16
Scenes 13 to 16 Scenes 13 to 16/1 to 4
Scene selection buttons and
GRX-IT 4-Scene Wireless Remote
Control activate:
GRX-8IT 8-Scene Wireless
Remote Control activates:
DIP Switch Settings
5 6
Color and Engraving Codes
6
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-7 01.29.04
®
Wallstations
TM
SG-4PSN-___-___
4-Partition Status Wallstation
LEDs
Reset
A
12345
Movable Wall
Movable Wall
BC
Movable Wall
Movable Wall
D
Color and Engraving Codes
Description
• Coordinates lighting for up to four movable walls
(five rooms). Each toggle button is setup to
operate the Control Units associated with a
movable wall.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• When the wall is open to make one large space,
the user presses the wall’s toggle button to make
the LED light up. The GRAFIK Eye Control Units
assigned to the buttons now work “in combina-
tion.” Scene changes at one Control Unit occur on
all of these Control Units.
• When the wall is closed to make several smaller
spaces, the user presses the wall’s toggle button
to turn off the LED. The Control Units now work
independently.
• The bottom button resets all Control Units to
independent operation.
• The example shows how to use the Wallstation in
a space with four movable walls.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
SG-4PSN-WH-E01
SG-4PSI-WH-E00
(Insert version)
Toggle buttons
Button:
Button 1
Button 2
Button 3
Button 4
Wall:
Wall A
Wall B
Wall C
Wall D
Combine
Control Units:
1 and 2
2 and 3
3 and 4
4 and 5
Example
7
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-8 01.29.04
®
Wallstations
TM
SG-4MN-___-___
4-Button Master Wallstation
Description
• Allows user to control several different areas of
GRAFIK Eye lighting from one master location.
• Each button can operate a different GRAFIK Eye
Control Unit or group of Control Units.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Four toggle buttons turn their associated Control
Units on (to Scene 1) and off.
• Status LEDs indicate which Control Units are on.
• The bottom button either turns all associated
Control Units on (to scene 1) or off, depending on
settings of DIP switches 5 and 6.
• In a home, a Master Wallstation might be placed
inside the main entry. The first button would turn
on foyer lights, the second button would light a
path to the kitchen, etc.
• The Master Wallstation works with a total of eight
GRAFIK Eye 3000 or 4000 Series Control Units.
The Control Units can be assigned to buttons in
any combination.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, please refer to
the seeTouch Ordering Guide (P/N 367-274) or
visit the website at www.lutron.com/seetouch.
Color and Engraving Codes
SG-4MN-WH-E01
SG-4MI-WH-E00
(Insert version)
Field Selected Functionality
LEDs
All off
(or all on to Scene 1)
Toggle buttons
DIP Switches 7-10 are set at the factory. Do not change
switch 7, 8, or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
DIP Switch Settings
5 6
Bottom button:
Turns all associated Control
Units on to Scene 1.
Turns all associated Control
Units off.
8
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-9 01.29.04
®
Wallstations
TM
4
3
2
1
Dimensions
Front View
Specifications
Power
Low-voltage type Class 2 (PELV). Operating voltage:12/24 V Direct Current.
Key Design Features
• Field-changeable button and faceplate assemblies allow
easy customization.
• Front accessible DIP switches allow change of function
without removing the unit from the wall.
• Meets IEC 801-2. Tested to withstand 15kV electro-static
discharge without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multi-ganging.
• Can be ganged to share a common faceplate with NovaT*
® and Vareo®
Dimmers. To order new Wallplates for multi-ganging, specify “R3” openings
in a Lutron NovaT* multi-gang FB (fins broken) Series model number.
• Use Button Replacement Kits to change color, button configuration,
or engraving.
• Button Replacement Kits may also be used to convert between
non-insert and insert configurations.
System Communications and Capacity
• Low-voltage type Class 2 (PELV) wiring connects Wallstations
to Control Units and other components.
• Up to 8 Control Units and 16 total Wallstations and/or Control
Interfaces may be connected for a total of 24 control points.
Terminals
Accept up to two #18 AWG (1.0mm
2
) typical.
Environment
32-104°F (0-40°C). Relative humidity less than 90% non-condensing.
Mounting
Typical backbox dimensions: 95mm (3.74”) high, 55mm (2.17”) wide, 70mm
(2.75”) deep.
Side View
Back View
Terminals
for Class 2
(PELV)
Wiring
1 1/16”
(27 mm)
2 3/4”
(70 mm)
4 9/16”
(116 mm)
5/16”
(8 mm)
3/4”
(19 mm)
9
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-10 01.29.04
®
Wallstations
TM
Matte Finishes
White WH
Ivory IV*
Beige BE
Gray GR*
Brown BR
Black BL
* GR, IV not currently backlighted
Color/Finish and Customizing Information
Color/Finish
Multi-ganging
Gloss Finishes
Available with Insert (I) style controls only.
Ship with Claro
® faceplates.
White GWH
Light Almond GLA
• Order Insert (I) style controls.
• To order new Wallplates for multi-ganging, specify
“R3” openings in a Lutron NovaT*
® multi-gang FB
(fins broken) Series model number.
Metal Finishes
With Black Plastic Buttons (Standard)
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum Finishes
Clear CLA
Black BLA
Brass BRA
Backlighting Notes:
Illuminated text (translucent text
on buttons) is available for these
colors: BL and BR (including all
metal finishes).
Illuminated buttons (with black
text on buttons) are available for
these colors: WH, BE, GR, WH*,
GLA*.
* Insert (I) style controls only
Use Button Replacement Kits to change: colors, button
configuration, engraving, between insert and non-insert versions.
Each Kit includes
an adapter, button
assembly, and
wallplate
Non-Insert Kit
Examples:
Wallplate for 2 seeTouch Wallstations,
Model # NT-R3-R3-FB-(color)
Wallplate for other Lutron controls and
2 seeTouch Wallstations,
Model # NT-T8-R3-R3-FB-(color)
Note: New button inserts are not included with
multi-ganging Wallplates.
Button Replacement Kits
Insert Kit
10
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-11 01.29.04
®
Wallstations
TM
DIP Switches
• Set DIP switches 1-4 to give the Wallstation a
unique system address from 1 to 16.
• Set additional DIP switches (if any) to specify
function as shown on the first page of the
Wallstation’s Specification Submittal.
• DIP switch 10 controls the button backlight.
Low-voltage Class 2 (PELV) Wiring
• Use low-voltage Class 2 (PELV) wiring to daisy-chain
Wallstations to Control Units and other components.
• Make connections inside the wallbox or in a
switch/junction box with a maximum wire length of 8
feet (2.5m) from the link to the Wallstation.
When used with GRAFIK Eye 3000 Control Units
• Two #18 AWG (1.0mm
2
) conductors for common
(terminal 1) and 12VDC (terminal 2). Ensure that the
terminal 2 connection is wired correctly. Refer to
GRAFIK Eye 3000 Series Specification Submittal.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for
data link (terminals 3 and 4).
When used with GRAFIK Eye 4000 Control Units
• Two #12 AWG (2.5mm
2
) conductors for common
(terminal 1) and 24VFW (terminal 2). These won’t fit
in terminals. Connect as shown.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for
data link (terminals 3 and 4).
• Connect Drain/Shield as shown. Do not connect to
Ground (Earth) or Wallstation. Connect the bare drain
wires and cut off the outside shield.
Note: Use appropriate wire connecting devices as
specified by local codes.
4
3
2
1
Data Link - (1) twisted,
shielded pair #18 AWG
(1.0mm
2
)
3: MUX
4: MUX
Class 2/PELV
Control wiring
1: Common
2: 24VFW
D: Drain/Shield
Wallstation Rear View
(2) #12 AWG
(2.5mm
2
)
(2) #12 AWG
(2.5mm
2
)
(1) #18 AWG
(1.0mm
2
)
(1) #18 AWG
(1.0mm
2
)
Wallstation Installation
Address
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DIP Switch Settings
1 2 3 4
Reserved for GRX-PRG, if present on link.
11
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Sg SG.qxp (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 18 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document