RESIDENTIAL SITE PLAN CHECKLIST
Signed and sealed by a Florida licensed surveyor digitally submitted.
Lot number and proposed model # or plan name and home elevation selected
Lot corner elevations existing and proposed.
A copy of that portion of the subdivision grading plan for the lot.
Show all property lines with distances.
Show all ROWs and recorded easements.
Proposed finish floor elevation (per approved subdivision grading plan). If different from the
approved grading plan, supply an engineer’s signed and sealed letter changing finished floor
elevation.
Drainage type that matches approved subdivision grading plan (A, B or C). If different than the
approved subdivision grading plan, supply an engineer’s signed and sealed letter changing the
drainage type. Also show drainage flow arrows.
Location of home on lot. Front, side and rear closest distances from lot line to home.
Current zoning building setback requirements.
Location of driveway, walks, patios, pavers, pool, spa, storage shed, a/c pad (a/c cannot be
placed in minimum side setback) and any other impervious items on the lot.
Show any storm drain inlets or other draining structures.
Lot square footage and total impervious area in sq.ft., also expressed as a percent of lot area.
North orientation arrow and scale of site plan.
Flood zone(s) designated on plan, if more than one, show all locations.
Any proposed well or septic locations.
Application will not be distributed for city staff review until all of the above items are
submitted.
SIGNATURE OF OWNER/AUTHORIZED AGENT DATE
~
~
Groveland
FLORIDA
City
with
Natural
Charm
·
CITY OF GROVELAND
BUILDING PERMIT APPLICATION
Date Received:
Permit #
PROPERTY INFORMATION
Site Address # Street City Zip
Subdivision Phase Lot #
Model Elevation Lot Area sq.ft. Impervious area sq.ft.
Legal Description
Alternate Key #
PROJECT INFORMATION Single Family Residence Duplex Townhome Commercial _
Demolition New Alteration Addition Repair Other
Scope of work to be performed
Project Cost $ Project cost of $2,500 or over requires the recording of a notice of commencement
Bonding Company
Address
Architect’s Name License # Phone #
Engineer’s Name License # Phone #
WARNING TO 0WNER: “YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFOE RECORDING YOUR NOTICE OF COMMENCEMENT”.
Detached Garage Yes No Garage Value $ Sewer Septic Sprinkler Yes No
Required work: Plumbing Electrical Mechanical Gas Roofing
SUBCONTRACTORS Company Name
Fla. License # Reg/Cert
License Holders Name
Elect
Mech
Plumb
Gas
Fire
Roof
City
Email
City
Email
First License #
Address # Street
Phone # Email
OWNER’S INFORMATION
Name(s)
Address # Street
State Zip Phone #
Fee Simple Titleholder’s Name (if other than owner)
Address # Street
State Zip Phone #
CONTRACTOR’S INFORMATION
Qualifier Name: Last
Company Name
City State Zip
1. All Building Permit submittals for new home or new commercial building must be in digital format.
2. Submit digital permit applications to PERMITTING@GROVELAND-FL.GOV
3. Re-inspection fees must be paid prior to scheduling a re-inspection.
4. Incomplete permit applications will not be processed until complete.
5. To schedule an inspection email request to: inspectionrequest@alpha-inspections.net
City of Groveland, Building Services Department, 156 S. Lake
Avenue, Groveland, FL 34736
E-
mail: permitting@groveland-fl.gov
Phone (352) 429-2141 Fax (352) 429-3852 (revised 3/12/20)
CONTRACTOR’S SIGNATURE
STATE OF FLORIDA
COUNTY OF LAKE
I DO HEREBY S SWEAR THAT THE INFORMATATION CONTAINED HEREIN AND THE ATTTACHMENTS
HERETO ARE TRUE AND ACCURATE TO THE BEST OF MY KNOWLEDGE AND THAT NO WORK OR
INSTALLATION HAS COMMENCED PRIOR TO ISSUANCE OF A PERMIT.
OWNER’S SIGNATURE
STATE OF FLORIDA
COUNTY OF LAKE
Sworn to (or affirmed) and subscribed before me this ____ day of _____ by _________________
(owner)
(Seal) ________________________________
Signature of Notary Public
Personally Known:______
OR Produced Identification:_____
Type of Identification Produced:____________
Sworn to (or affirmed) and subscribed before me this ____ day of _____ by _________________
(Seal)
(contractor)
________________________________
Signature of Notary Public
Personally Known:______
OR Produced Identification:_____
Type of Identification Produced:____________
click to sign
signature
click to edit
click to sign
signature
click to edit
r;
~
Groveland
FLORIDA
City with Natural Chann
~
City of Groveland
Building Services
Electronic Document Requirements
Introduction:
The City of Groveland recently expanded the technology sector of the Building Department
to include the Trakit permitting program. As part of this expansion, permits issued going
forward must be submitted electronically. Please see the specifics of each form and format
required below.
Building Plans:
Smaller buildings such as sheds, screen rooms and very small additions can be submitted
in PDF format with printable range as low as 11x17. Plans must be electronically signed by
the architect or engineer in accordance with Florida Statutes or the Florida Administrative
Code. We want as few files as possible, so please submit one file if possible, but at the
most, one file for each design professional.
Single Family Residential homes and small commercial buildings (less than 5,000 square
feet) must be submitted in PDF format with printable range as low as 24x36. Plans must be
electronically signed by the architect or engineer in accordance with Florida Statutes or the
Florida Administrative Code. We want as few files as possible, so please submit one file if
possible, but at the most, one file for each design professional.
Large commercial projects (larger than 5,000 square feet must be submitted in PDF format
with printable range of 36x48. Some exceptions to this requirement can be granted but
must be approved prior to submittal and at the discretion of the Building Official. Plans must
be electronically signed by the architect or engineer in accordance with Florida Statutes or
the Florida Administrative Code. We want as few files as possible, so please submit one file
if possible, but at the most, one file for each design professional.
Truss Drawings, energy calculations, details associated with engineer repair letters and
similar can be submitted in PDF format on 8x11 printable range. However, the truss layout
must be a minimum of 11x17 printable range.
AC layouts for residential structures must be in PDF format and on printable range no less
than 11x17.
Security Settings:
PDF files must not be locked and must allow for the plan reviewer to add comments, place
watermarks and other processing required to process the file.
Submitting Files:
Miscellaneous, Commercial, and Zoning clearance permits may be submitted in person or
emailed to permitting@groveland-fl.gov.
All Single Family Residential home permits must be submitted through Dropbox. A link for
Dropbox may be obtained by emailing a request to permitting@groveland-fl.gov.
~
~
Groveland
FLORIDA
City
with
Natural
Charm
·
Revised 2019
Residential Design Checklist
Please use the checklist below to assist in designing plans for the latest edition of the Florida Building
Code. This should only be used as a guide. Depending on the nature of your project, more extensive details
may be required. Plans should provide specific details that are referenced on the plans and associated with
specific details on the applicable detail sheets. In other words, the reviewer cannot assume that a detail
applies to specific location unless that location has a referenced detail associated with it.
N
Design Criteria
Plans are digitally signed by an engineer or architect per R301 FBCR
Plans are scaled and legible
Plans indicate wind speed, exposure, pressure coefficient for all openings
Default exposure listed as C or other exposure type with justification
Designer’s name, address and license number per FL admin code requirements
Site plan showing correct orientation
FLOOR PLAN
Accessible restroom with 29” opening
Square footage both conditioned and unconditioned
Tempered glass shown where required
Egress windows shown where required
Label all windows and doors with sizes
Window sills greater than 24” where FF is 72” above grade
Ceiling height
FOUNDATION
Footing locations with sizes and reinforcement requirements
Vertical dowel locations shown
Slab depth and concrete compressive strength
Slab shown minimum 12” below grade
Relieving arch detail
Column pad footing details/location
Interior footing detail where required
MASONRY WALLS
Vertical steel grade, lap, location
Lintel Schedule showing length, depth and reinforcement
Typical wall and opening detail
Change in height detail
Non-continuous lintel detail
Stem-wall detail
Rough opening detail
FRAME WALLS
Size, grade and species of lumber
Pressure treated bottom plate
Typical wall section
Type, exposure and thickness of sheathing
Fastening schedule of sheathing
Header and opening details
Anchor type and spacing
Revised 2019
Continuous load path detail including connector hardware
2-story wall detail
ROOF FRAMING
Digitally signed truss drawings
Truss layout
Typical wall section showing the typical truss connector
Truss connector schedule for trusses where uplift exceeds typical
Truss bracing schedule or design layout
Roof sheathing schedule with nailing pattern
Valley framing detail
Gable bracing and special bracing details
Interior bearing wall connector detail
ELECTRICAL
Compliance statement indicating the version of code design
Location of AFCI and GFCI protection
Smoke detector location and type
General electrical layout
Service size
Grounding electrode type
MECHANICAL
Equipment locations
Energy calculations digitally signed
Correct orientation
Manual J and D
Duct Layout on 11x17
PLUMBING
Water heater location
Reduced pressure valve where required
Fixture locations
GAS
BTU’s for each outlet and total BTU
Gas piping size and type
Makeup air and combustion air where required
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
_________________________________
___________________
PRODUCT APPROVAL SPECIFICATION SHEET
As required by Florida Statute 553.842 and Florida Administrative Code 9B-72, please provide the information and approval
numbers on the building components listed below if they will be utilized on the construction project for which you are applying
for a building permit. We recommend you contact your local product supplier should you not know the product approval
number for any of the applicable listed products. Statewide approved products are listed online @ www.floridabuilding.org
Category/Subcategory Manufacturer Product Description Approval Number(s)
1. EXTERIOR DOORS
A. SWINGING
B. SLIDING
C. SECTIONAL/ROLL UP
D. OTHER
2. WINDOWS
A. SINGLE/DOUBLE HUNG
B. HORIZONTAL SLIDER
C. CASEMENT
D. FIXED
E. MULLION
F. SKYLIGHTS
G. OTHER
3. PANEL WALL
A. SIDING
B. SOFFITS
C. STOREFRONTS
D. GLASS BLOCK
E. OTHER
4. ROOFING PRODUCTS
A. ASPHALT SHINGLES
B. NON-STRUCT METAL
C. ROOFING TILES
D. SINGLE PLY ROOF
E. OTHER
5. STRUCT COMPONENTS
A. WOOD CONNECTORS
B. WOOD ANCHORS
C. TRUSS PLATES
D. INSULATION FORMS
E. LINTELS
F. OTHERS
6. NEW EXTERIOR
ENVELOPE PRODUCTS
A.
The products listed below did not demonstrate product approval at plan review. I understand that at the time of inspection of these
products, the following information must be available to the inspector on the jobsite; 1) copy of the product approval, 2) performance
characteristics which the product was tested and certified to comply with, 3) copy of the applicable manufacturers installation
requirements. Further, I understand these products may have to be removed if approval cannot be demonstrated during inspection.
APPLICANT SIGNATURE DATE
R-1305 01-04
click to sign
signature
click to edit