PF-11.16
PROJECT INFORMATION APPROVAL STAMP
Project:
q
Approved
Address:
q
Approved as noted
Contractor:
q
Not approved
Engineer: Remarks:
Submittal Date:
Notes 1:
Notes 2:
MALLEABLE IRON & CAST IRON FITTINGS
Malleable Iron Face Bushing
q
Cast Iron Face Bushing
FIGURE 385
Face Bushing
Size
Unit Weight
Black
NPS DN NPS DN lbs kg
3 80 2 50 13.30 6.03
4 100
2
1
/2 65
2.55 1.16
3 80
19.20 8.71
According to specifications, hex bushings and cored plugs should be used with 150# malleable iron and 125# cast iron. Solid plugs and face bushings are recommended for use with 250# and 300# fittings.
Note: See following page for malleable iron pressure-temperature ratings.
Note: See page 3 for cast iron pressure-temperature ratings.
q
FIGURE 385
Face Bushing
Size
Unit Weight
Black Galv.
NPS DN NPS DN lbs kg lbs kg
3
4 20
3
8 10 0.08 0.04
1
2 15 0.06 0.03 0.06 0.03
1 25
1
2 15 0.16 0.07 0.16 0.07
3
4 20 0.10 0.05 0.10 0.05
1
1
4 32
1
2 15 0.30 0.14
3
4 20 0.27 0.12
1 25 0.19 0.09 0.19 0.09
1
1
2 40
1
2 15 0.40 0.18
3
4 20 0.39 0.18
1 25 0.33 0.15
1
1
4 32 0.16 0.07 0.16 0.07
2 50
1 25 0.65 0.29 0.65 0.29
1
1
4 32 0.53 0.24 0.53 0.24
1
1
2 40 0.40 0.18 0.40 0.18
2
1
2 65
1
1
4 32 1.10 0.50
2 50 0.40 0.18 0.40 0.18
3 80 2
1
2 65 0.99 0.45
PF-11.16
MALLEABLE IRON FITTINGS
Anvil Class 150/300 Malleable Iron Fittings conform to ASME
B16.3 and Unions conform to ASME B16.39.
ALL ELBOWS & TEES
3
8" (10 DN) and LARGER ARE 100% GAS TESTED AT
A MINIMUM OF 100 PSI. (6.9 bar)
Malleable Iron Threaded Fittings
Pressure - Temperature Ratings
Temperature
Pressure
Class 150
Class 300
Sizes
1
4"–1"
(6–25 mm)
Sizes 1
1
4"–2"
(32–51 mm)
Sizes 2
1
2"–3"
(64–76 mm)
(°F) (°C) psi bar psi bar psi bar psi bar
-20°
to
150°
-28.9°
to
65.6°
300 20.7 2,000 137.9 1,500 103.4 1,000 68.9
200° 93.3 265 18.3 1,785 123.1 1,350 93.1 910 62.7
250° 121.1 225 15.5 1,575 108.6 1,200 82.7 825 56.9
300° 148.9 185 12.8 1,360 93.8 1,050 72.4 735 50.7
350° 176.7 150 10.3 1,150 79.3 900 62.1 650 44.8
400° 204.4 935 64.5 750 51.7 560 38.6
450° 232.2 725 50.0 600 41.4 475 32.8
500° 260.0 510 35.2 450 31.0 385 26.5
550° 287.8 300 20.7 300 20.7 300 20.7
For Listings/Approval Details and Limitations, visit our website at
www.anvilintl.com or contact an Anvil Sales Representative.
Standards and Specifications
Dimensions Material Galvanizing
*
Thread Pressure Rating
MALLEABLE IRON FITTINGS
Class 150/PN 20 ASME B16.3 ASTM A-197 ASTM A-153 ASME B1 20.1 ASME B16.3
Class 300/PN 50 ASME B16.3 ASTM A-197 ASTM A-153 ASME B1 20.1 ASME B16.3
MALLEABLE IRON UNIONS
Class 150/PN 20 ASME B16.39 ASTM A-197 ASTM A-153 ASME B1 20.1 ASME B16.39
Class 250 ASME B16.39 ASTM A-197 ASTM A-153 ASME B1 20.1 ASME B16.39
Class 300/PN 50 ASME B16.39 ASTM A-197 ASTM A-153 ASME B1 20.1 ASME B16.39
* ASTM B 633. Type I, SC 4, may be supplied as alternate zinc coating per applicable ASME B16 product standard.
Malleable Iron Threaded Pipe Unions
Pressure - Temperature Ratings
Temperature
Pressure
Class 150 Class 250 Class 300
(°F) (°C) psi bar psi bar psi bar
-20°
to
150°
-28.9°
to
65.6°
300 20.7 500 34.5 600 41.4
200° 93.3° 265 18.3 455 31.4 550 37.9
250° 121.1° 225 15.5 405 27.9 505 34.8
300° 148.9° 185 12.8 360 24.8 460 31.7
350° 176.7° 150 10.3 315 21.7 415 28.6
400° 204.4° 110 7.6 270 18.6 370 25.5
450° 232.2° 75 5.2 225 15.5 325 22.4
500° 260.0° 180 12.4 280 19.3
550° 287.8° 130 9.0 230 15.9
Note: Unions with Copper or Copper Alloy seats are not intended for use where temperature exceeds
450°F
CAST IRON FITTINGS
PF-11.16
For Listings/Approval Details and Limitations, visit our website at
www.anvilintl.com or contact an Anvil Sales Representative.
Standards and Specifications
Dimensions Material Galvanizing
*
Thread Pressure Rating
CAST IRON THREADED FITTINGS
Class 125 ASME B16.4 ASTM A-126 (A) ASTM A-153 ASME B1.20.1 ASME B16.4
Class 250 ASME B16.4 ASTM A-126 (A) ASTM A-153 ASME B1.20.1 ASME B16.4
CAST IRON PLUGS AND BUSHINGS
ASME B16.14 ASTM A- 126 (A) ASTM A-153 ASME B1.20.1 ASME B16.14
* ASTM B 633. Type I, SC 4, may be supplied as alternate zinc coating per applicable ASME B16 product standard.
Anvil standard and extra heavy cast iron threaded fittings
are manufactured in accordance with ASME B16.4. Plugs and
bushings are manufactured in accordance with ASME B16.14.
NOTE: Figure 367 Concentric Reducers do not meet the overall length
requirement of ASME B16.4. All other dimensions are in compliance.
Cast Iron Threaded Fittings
Pressure - Temperature Ratings
Temperature
Pressure
Class 125 Class 250
(°F) (°C) psi bar psi bar
-20° to 150° -28.9 to 65.6 175 12.1 400 27.6
200° 93.3 165 11.4 370 25.5
250° 121.1 150 10.3 340 23.4
300° 148.9 140 9.7 310 21.4
350° 176.7 125 8.6 300 20.7
400° 204.4 250 17.2
PF-6.13
MALLEABLE IRON & CAST IRON FITTINGS
1) Inspect both male and female components prior to assembly.
Threads should be free from mechanical damage, dirt, chips and excess cutting oil.
Clean or replace components as necessary.
2) Application of thread sealant
Use a thread sealant that is fast drying, sets-up to a semi hard condition and is vibration resistant. Alternately, an anaerobic
sealant may be utilized.
Thoroughly mix the thread sealant prior to application.
Apply a thick even coat to the male threads only. Best application is achieved with a brush stiff enough to force sealant down
to the root of the threads.
3) Joint Makeup
For sizes up to and including 2" pipe, wrench tight makeup is considered three full turns past handtight. Handtight engagement
for
1
2" through 2" thread varies from 4
1
2 turns to 5 turns.
For 2
1
2" through 4" sizes, wrench tight makeup is considered two full turns past handtight. Handtight engagement for 2
1
2"
through 4" thread varies from 5
1
2 turns to 6
3
4 turns.
General Assembly of Threaded Fittings