SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 1 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Diva 010 V Controls
Controls for 010 V LED drivers and
fluorescentballasts.
Features
Large paddle switch with a captive linear-slide control
for a standard designer-opening wallplate.
010 V control link controls third party fixtures.
DVSTV- wires as single pole or 3-way,
120–277V~switch.
• DVTV- wires as a 24 V- switch. A power pack is
required to switch 120–277 V~ and 347 V~.
• Patented switching technology extends
productlifetime.
Coordinating Claro and Satin Colors wallplates
1
(available separately).
High-end and low-end trim user adjustable for
optimalperformance.
Select light
level with slider
Switch on
(to selected
light level)/off
Diva 010 V Control
1
DVSTV-453PH-WH and DVSTV-453PH-WH-C available in white gloss only.
2
For 3-way switching, use Claro switches or other mechanical switches.
3
“XX” in the model number represents gloss finish color code. See Standard Colors and Finishes on Page 4.
4
“YY” in the model number represents satin finish color code. See Standard Colors and Finishes on Page 4.
5
A Lutron power pack (PP-DV or PP-347H) is required for switching ballasts and drivers. For Lutron power pack specification, please see Lutron P/N 369544.
6
Clamshell packaged product for Canada.
Model Number Operating Voltage Wiring
Load Switching
Capacity
010 V Sink
Capacity
DVSTV-XX
3
120 –277 V~ Single pole / 3-way
2
8 A 50 mA
DVSTV-453PH-WH
1
DVSTV-453PH-WH-C
1, 6
120 –277 V~ Single pole / 3-way
2
450 W
3.75 A (120 V~)
1.62 A (277 V~)
50 mA
DVTV-XX
3
DVSCT V-Y Y
4
24 V- Single pole only
0 A
5
30 mA
Model Numbers
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 2 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Specifications
DVSTV- Models
Regulatory Approvals
• cULus Listed
• NOM
Power
Operating Voltage
120277 V~ 50/60 Hz
Output Ratings
Switch rating of 8 A.
010 V control link for 50 mA maximum output
(sinkonly).
0–10 V Control Link
• 010 V control link is Class 1.
Controls up to 25 ballasts or drivers (IEC 60929 Annex
E.2 requires the ballast / driver to limit the current draw
to 2.0 mA maximum).
Performance
Power pack cannot be used with DVSTV- models.
Works with all ballasts and drivers that provide a
current source compliant to IEC 60629 Annex E.2,
and whose inrush current does not exceed NEMA410
standards for electronic ballast / driver loads of 8 A
steady state current.
Adjustable high-end and low-end trim for optimal
dimming performance.
Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
Captive linear slider.
Precise color matching.
Environment
For indoor use only.
Ambient operating temperature: 32 °F to 104°F
(0°Cto 40 °C), 0% to 90% humidity, non-
condensing.
Application Requirements
No derating required if ganged.
Night light not available.
• Always consult local wiring codes.
Warranty
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 3 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Specifications (continued)
DVSTV-453PH-WH Model
Regulatory Approvals
• cULus Listed
• NOM
Power
Operating Voltage
120277 V~ 50/60 Hz
Output Ratings
Switch rating of 450 W.
010 V control link for 50 mA maximum output
(sinkonly).
0–10 V Control Link
• 010 V control link is Class 1.
Controls up to 25 ballasts or drivers (IEC 60929 Annex
E.2 requires the ballast / driver to limit the current draw
to 2.0 mA maximum).
Performance
Power pack cannot be used with DVSTV- models.
Works with all ballasts and drivers that provide a
current source compliant to IEC 60629 Annex E.2,
and whose inrush current does not exceed NEMA410
standards for electronic ballast / driver loads of 8 A
steady state current.
Adjustable high-end and low-end trim for optimal
dimming performance.
Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
Captive linear slider.
Precise color matching.
Environment
For indoor use only.
Ambient operating temperature: 32 °F to 104°F
(0°Cto 40 °C), 0% to 90% humidity, non-
condensing.
Application Requirements
No derating required if ganged.
Night light not available.
• Always consult local wiring codes.
Warranty
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 4 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Specifications (continued)
DVTV- and DVSCTV- Models
Power
Operating Voltage
24 V- 100 mA
Output Ratings
Power pack required for load switching. Power pack is
rated for 16 A.
30 mA maximum output (sink only).
0–10 V Control Link
010 V control is Class 2.
Controls up to 15 ballasts or drivers (IEC 60929 Annex
E.2 requires the ballast / driver to limit the current draw
to 2.0 mA maximum).
Performance
For 120-277 V~ installations switching more than
8A, use DVTV- with Lutron power pack (PP-DV). See
Lutron P/N 369544.
For 347 V~ installations, use DVTV- with Lutron power
pack (PP-347H) See Lutron P/N 369544.
Works with all ballasts and drivers that provide a
current source compliant to IEC 60629 Annex E.2.
Adjustable high-end and low-end trim for optimal
dimming performance.
Power failure memory: should power be interrupted,
the 010 V- signal will return to its previously set level
prior to the interruption when power is restored.
Captive linear slider.
Precise color matching.
Environment
For indoor use only.
Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0% to 90% humidity, non-
condensing.
Application Requirements
No derating required if ganged.
Night light not available.
• Always consult local wiring codes.
Warranty
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 5 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Dimensions
4.69 in
(119 mm)
2.94 in
(75 mm)
0.30 in
(7.6 mm)
1.31 in
(33 mm)
2.75 in
(70 mm)
Standard Colors and Finishes
Gloss Finishes*
Add color suffix to model #
Example: DVSTV-WH
WH White
IV Ivory
AL Almond
LA Light Almond
GR Gray
BR Brown
BL Black
Satin Colors*
Add color suffix to model #
Example: DVSCTV-SW
HT Hot
MR Merlot
PL Plum
TQ Turquoise
SG Sea Glass
TP Taupe
ES Eggshell
BI Biscuit
SW Snow
PD Palladium
MN Midnight
TC Terracotta
SI Sienna
GB Green Briar
BG Bluestone
MS Mocha Stone
GS Goldstone
DS Desert Stone
ST Stone
LS Limestone
* DVSTV-453PH-WH and DVSTV-453PH-WH-C available in white gloss only.
5
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 6 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Side View
Front View
Minimum Light Level
(Low-End) Trim
High-End and Low-End Adjustments
Maximum Light Level
(High-End) Trim
DVTV- and DVSCTV- Models
All Models
Bottom View
Maximum Light Level
(High-End) Trim
DVSTV- Models
6
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 7 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Ground
Line/Hot
120–277 V~
50/60 Hz
Red /
White
Red
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Neutral
Neutral
0-10 V-
Ballast / Driver
0-10 V- Ballast / Driver
Neutral
Wiring Diagrams
DVSTV-
Single Pole Wiring
3-Way Wiring
*
*
**
***
*
Copper / Black screw terminal
**
Brass / Gold screw terminal
***
Green screw terminal
For proper wiring, please refer to installation instructions for 3-way switch.
Black
Ground
Line/Hot
120–277 V~
50/60 Hz
Red / White
Red
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Neutral
Neutral
0-10 V-
Ballast / Driver
0-10 V- Ballast / Driver
Switched
Hot
Neutral
Black
Ground
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Switched
Hot
3-Way
Switch
Switched
Hot
Switched
Hot
7
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 8 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Wiring Diagrams (continued)
DVSTV-
(continued)
Ground
Line/Hot
120–277 V~
50/60 Hz
Red /
White
Red
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Neutral
Neutral
0-10 V- Ballast/Driver
0-10 V- Ballast/Driver
Neutral
4-Way Wiring
*
*
**
***
Black
Ground
Violet (+)
Gray (-)
3-way
Switch
Switched
Hot
Switched
Hot
Ground
*
*
**
***
**
Note: For 4-way wiring, control must be installed line side or load side. It cannot be installed in the 4-way location.
*
Copper / Black screw terminal
**
Brass / Gold screw terminal
***
Green screw terminal
For proper wiring, please refer to installation instructions for 3-way /4-way switch.
4-way
Switch
8
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369147f 9 10.03.2017
Wallbox Controls0–10 V ControlsDiva
Dimming With ON/OFF Control
Wiring Diagram Using a Power Pack
0-10 V- Ballast / Driver
Neutral
Red
Red
Red / White
Red
White
Blue
Black
Black
Neutral
Line / Hot
PP-DV / PP-347H
Class 2 Only
Switched
Hot
Dimming With ON / OFF Control For Drivers Which Support Dim To OFF Capability
Power Wiring Not Shown—See Lighting Device For Wiring
Blue
Red/White
Red
Wiring Diagrams (continued)
DVTV- and DVSCTV-
0-10 V- Ballast / Driver
Neutral
Switched
Hot
0-10 V- Ballast / Driver
0-10 V- Ballast / Driver
Gray (-)
Violet (+)
Gray (-)
Violet (+)
120–277 / 347 V~ 50 / 60 Hz
Gray (-)
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Violet (+)
Gray (-)
Violet (+)
)Lutron, Lutron, Diva, Claro, and Satin Colors are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
9