SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Linear Recessed Parabolic Fixture
369495c 2 05.16.13
Lutron®
Specifications
Regulatory Approvals
• Approved to ULR and CSA standards
Power / Performance
• Universal input voltage 120/277 V~
• Total Harmonic Distortion (THD) <20%
• Power factor >0.9
• Class A sound rating
• Dimming Range: 100% to 1% of total light output
Environment
• 50 °F to 104 °F (10 °C to 40 °C)
• Relative humidity less than 90% non-condensing
• For indoor use only
Controls
The following controls (EcoSystemR or 3-wire models)
are available for use with LutronR dimmable fixtures:
• GRAFIK EyeR QS • GRAFIK EyeR
• QuantumR • Energi Savr NodeT
• Maestro WirelessR • Nova T*R
• NovaR • DivaR
• SkylarkR • AriadniR
• VareoR • PowPakT
Lamps
• Use only with lamps conforming to the
IEC 60081/60901 specification; Lutron recommends
Sylvania, GE, or Philips lamps for proper dimming
performance
• Lamps are not included with fixture
• 2 or 3 lamp configurations available in T8, T8 U-bend,
T5HE, or T5HO lamp options
• Refer to lamp manufacturer for lamp burn-in
requirements
Key Design Features
• Design provides true parabolic contour and maximum
photometric efficiency with superior brightness control
• Integral seals prevent light leaks without the need for
gasketing. Hinges and spring-loaded latches allow
louvers to swing down for relamping
• Designed to lay into standard NEMA Type G grid
(suspended ) T-bar ceilings
• Gypsum ceiling and surface mount options available
• Housing and ends are die-formed pre-painted
22 gauge steel, with interlocking tabs and screws
• Side mounted T-bar clips
• Quick access plate for easy power connections
• High-reflectance, low-glare satin white reflector
provides soft, uniform indirect light distribution
• Reveal areas and hardware have non-reflective black
finish to create a floating louver appearance
• 3 in (76 mm) deep, pre-anodized aluminum louvers
with semi-specular finish, 6, 9, 12 or 18 cells
• Louver is easily removed providing easy lamp access
for relamping
• Ballast cover and louvers are removable/reversible
without tools
• IEC rated rotary locking sockets (lampholders)
• Smooth, continuous flicker free dimming