Timeclock Interface
369437d 2 03.27.19
QSGR-TC-3S-WHQS System
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Specifications
Regulatory Requirements
• UL
® Listed
• CSA
• CE
• RoHS compliant
• NOM
Input Power
• 120—240 V~ 50/60 Hz 100 mA
Key Design Features
• Tested to withstand 16 kV electrostatic discharge
without damage or memory loss.
• Tested to withstand voltage surges of up to
6000 V~ and current surges of up to 3000 A.
Lightning strike protection meets ANSI/IEEE
62.41-1980 standard.
• Power failure memory automatically restores
Timeclock to the selection prior to power interruption.
Environment
• 32 °F to 104 °F (0 °C to 40 °C)
• Relative humidity less than 90% non-condensing
Info Screen
• OLED (organic LED) screen is viewable from all angles.
• Screen turns off when idle for 30 seconds.
• Programmable Timeclock schedules.
• Programmable shade labels.
System Communications and Capacities
• 24 V- 150 mA IEC PELV/NEC
® Class 2 wiring
connects control units, wallstations, motorized
shades, and control interfaces.
• A QS system can have up to 100 devices and
100 zones.
• The QS Timeclock counts as 1 device on the QS link.
It is compatible with QS Standalone systems only and
is not compatible with Quantum.
Other Accessory Controls and Devices
• Energi Savr Node unit
• QSE-IO
• QSE-CI-NWK-E
• GRAFIK Eye QS
• QSPS (QS Link Power Supply - use if more than
3 devices are powered by the QS Timeclock)
Astronomic Timeclock
• 7 daily schedules available.
• One available holiday schedule is programmable by
date up to one year in advance.
• 25 events per day maximum.
• Astronomic times are programmable by integral
city database or by entering latitude and longitude.
Times automatically adjust throughout the year
based on location.
• Automatically adjusts for Daylight Savings Time
(DST), adjusted for the new dates; DST is
programmable.
• Afterhours feature allows occupants to temporarily
override Timeclock events.
• Security lockout via password for Timeclock settings.
Preset Shade Control
• 3 columns of shade controls.
• Open, preset, close, and raise / lower shade buttons.
• Each shade column can be programmed to operate
one shade or a group of shades.
Contact Closure Input (CCI) with Power
Supply Output
• 24 V- 50 mA
• Each QS Timeclock has one contact closure input
(Terminal A).
- The attached device must provide a dry contact
closure or solid-state output.
- Input is miswire-protected up to 36 V-.
• Each QS Timeclock can supply 50 mA maximum
at 24 V-.
- An auxiliary power supply must be used if the
device requires more than 50 mA.
• The CCI is capable of operating in the following
modes:
- Afterhours: Allows the CCI to start and end the
afterhours mode.
- Timeclock: Allows the CCI to enable and disable
the Timeclock.
- Disable CCI: The CCI will have no effect on the
system and will not appear on the list of available
sensors.
