Fillable Solar Systems Guidelines City of Miami Beach High (City of Miami Beach)

Fill Online, Printable, Fillable, Blank Solar Systems Guidelines City of Miami Beach High (City of Miami Beach) Form

Use Fill to complete blank online CITY OF MIAMI BEACH (FL) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Solar Systems Guidelines City of Miami Beach High (City of Miami Beach)

On average this form takes 2 minutes to complete

The Solar Systems Guidelines City of Miami Beach High (City of Miami Beach) form is 3 pages long and contains:

  • 0 signatures
  • 20 check-boxes
  • 0 other fields

Country of origin: US
File type: PDF

U.S.A. forms for City of Miami Beach

BROWSE CITY OF MIAMI BEACH (FL) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Solar Systems
Guidelines
City of Miami Beach
High Velocity Hurricane Zone (HVHZ)
Solar Systems
Electronic Permit Application
SOLAR SYSTEMS PERMIT DOCUMENT GUIDELINE
Building / Equipment / Roof Plan Information
Required for Photovoltaic & Solar Thermal Systems
1. Provide a roof plan diagram showing all dimensions and the total area of the roof.
2. Show roof edges, walls, parapet walls, change of elevations, expansion joints, roof top
equipment, etc. on the roof plan diagram
3. Show the location on the roof where the solar system is to be installed.
Include the size of the solar system and total area of the proposed system installed on the roof.
4. Provide the wind uplift zone (per ASCE-7) of the roof, the solar system is to be installed & the
wind uplift pressure for that zone.
5. Provide the Perimeter Width (per ASCE-7) of the roof and /or roof section, the solar system is to
be installed
6. Provide the type of structural roof deck type on the building, the solar system is to be installed
7. Specify condition of the roof assembly:
New roof (tied to a new construction master permit)
Separate roof permit required.
Re-roof (replacing existing roof assembly)
Separate roof permit required.
Existing roof (no change to roof assembly)
Fire Rating of the existing roof
assembly shall be maintained.
8. Specify the type of roof on the structure and the roofing material used for the roof assembly.
9. Submit roof clearance requirements for the proposed solar system.
10. Submit a detail of required roof penetration flashings
11. Provide a Florida Solar Energy Center ( FSEC ) photovoltaic system certification approval form
for the proposed solar system
NOTE: Photovoltaic Laminate Modules require a separate roofing permit
for the installation of this product.
12. Provide completed copy of owner's solar system disclosure form.
Page 1 of 3
Print Form
Solar Systems
Guidelines
Structural Design Requirements for Solar Systems
Provide signed & sealed drawings & design calculations for the applicable
requirements listed below:
1. Provide documentation and/or verification that the exposed solar panel equipment meets
wind load
2. Provide documentation and/or verification the support framing meets both uplift and lateral
forces
3. Provide documentation and/ or verification the structure will accommodate additional dead
loads
4. Provide design of connections for the wind loads
Electrical Design Requirements for Solar Systems
1. Submit a complete Electrical Diagram:
Designed in accordance to the NEC Article 690 Solar Photovoltaic
Systems, in its entirety.
2. Submit a floor plan showing location of all electrical equipment
3. Submit load calculations
NEC 110.3(B) Installation and Use Listed or Labeled equipment shall be
installed and used in accordance with any instructions included in the
listing or labeling
Electrical Engineer must sign and seal plans if:
1. The system has a value of more than $50,000
2. The system has an aggregate service of capacity of 600 amps (240 volts) or more for a
residential electrical system
3. The system has an aggregate service of capacity of 800 amps (240 volts) or more for a
commercial or industrial electrical system
Page 2 of 3
Solar Systems Guidelines
2. Solar water heater using a PV powered pump: Provide electrical listing for PV panel and
pump
3. Solar swimming pool water heater: Provide manufacturer's selected system installation
manual /detail and system specifications
4. Solar swimming pool water heater: Provide FSEC approval/listing and system reference
drawing
5. Show water heater storage tank location on the floor plan
6. Show water heater storage tank relief line termination point
7. Show piping layout from solar collector to storage tank
USEFUL LINKS
»
Florida Power & Light Company
» View Solar Energy Information
»
Customer-Owned Renewable Generation
» Photovoltaic Systems
» Photovoltaic Systems Interconnection Tiers
» Tier One (0-10kW)
Learn more
» Tier Two (>10kW - 100kW)
Learn more
» Tier Three (>100kW - 2mW)
Learn more
Note: For Tier Two & Tier Three Photovoltaic Systems: System designers please
contact FPL at netmetering@fpl.com prior to final design completion, to assure the
visible load break switch is
acceptable to FPL.
»
F L O R I D A S O L A R E N E R G Y C E N T E R (FSEC)
Page 3 of 3
Solar Water Heaters
System Components
1. Solar water heater: Submit FSEC approval/listing and system reference drawing
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Solar Systems Guidelines City of Miami Beach High (City of Miami Beach)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 21 February 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document