Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
1
Note: Please read all attached instructions prior to completing this application.
SECTION A GENERAL INFORMATION
1.
Facility Name:
a.
Operator Name:
b.
Is the operator identified in 1.a., the owner of the facility?
Yes
No
If no, provide the name and address of the operator and submit a copy of the contract and/or other
documents indicating the operator’s scope of responsibility for the facility.
2.
Facility Address:
Street:
State:
Zip:
3.
Business Mailing Address:
Street or P.O. Box:
State:
Zip:
4.
Designated signatory authority of the facility:
[Attach similar information for each authorized representative]
Name:
Title:
Address:
State:
Zip:
Phone #
5.
Designated facility contact:
Name:
Title:
Phone #
Permit Application Form
2
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION B BUSINESS ACTIVITY
Aluminum Forming
Asbestos Manufacturing
Battery Manufacturing
Can Making
Canned and Preserved Fruit and Vegetable Processing
Canned and Preserved Seafood
Carbon Black Manufacturing
Cement Manufacturing
Centralized Waste Treatment
Coal Mining
Coil Coating
Concentrated Animal Feeding Operation and Feedlots
Concentration Aquatic Animal Production
Copper Forming
Dairy Product Processing or Manufacturing Electric
and Electronic Components Manufacturing
Electroplating
Explosives Manufacturing
Fertilizer Manufacturing
Ferroalloy Manufacturing
Foundries (Metal Molding and Casting)
Glass Manufacturing
Grain Mills
Gum and Wood Chemicals Manufacturing
Hospital
Ink Formulation
Inorganic Chemicals
Iron and Steel
Landfill
Leather Tanning and Finishing
Meat and Poultry Products
Metal Finishing
Metal Products and Machinery
Mineral Mining and Processing
Nonferrous Metals Forming
Nonferrous Metals Manufacturing
Oil and Gas Extraction
Ore Mining
Organic Chemicals Manufacturing
Paint and Ink Formulating
1.
If your facility employs or will be employing processes in any of the industrial categories or business
activities listed below (regardless of whether they generate wastewater, waste sludge, or hazardous wastes),
place a check beside the category of business activity (check all that apply).
Industrial Categories
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
3
Paving and Roofing Manufacturing
Pesticides Chemical Manufacturing, Formulating, and/or Packaging
Petroleum Refining
Pharmaceutical Manufacturing
Phosphate Manufacturing
Photographic Processing
Plastic and Synthetic Materials Manufacturing
Porcelain Enameling
Printed Circuit Board Manufacturing
Pulp, Paper, and Fiberboard Manufacturing
Rubber Manufacturing
Soap and Detergent Manufacturing
Steam Electric Power Generating
Sugar Processing
Textile Mills
Timber Products
Transportation Equipment Cleaning
Waste Combustors
Other (Describe)
2.
Give a brief description of all operations at this facility including primary products or services (attach
additional sheets if necessary):
3.
Indicate applicable North American Industry Classification System (NAICS) for all processes:
a.
b.
c.
d.
e.
4.
Production Rate
Product
Past Calendar Year
Amounts per Day
(Daily Units)
Estimate This Calendar Year
Amounts Per Day
(Daily Units)
Average
Maximum
Average
Maximum
5.
For production-based categorical IUs only:
What is the facility’s long-term average categorical production rate for the past 5 years?
Permit Application Form
4
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION C WATER SUPPLY
1.
Water Sources: (Check as many as are applicable.)
Private Well
Surface Water
Municipal Water Utility (Specify City):
Other (Specify):
2.
Name (as listed on the water bill):
Street:
City:
State:
Zip:
3.
Water service account number:
4.
List average water usage on premises: [new facilities may estimate]
Type
Average Water Usage
(GPD)
Indicate Estimated (E) or
Measured (M)
a.
Contact cooling water
b.
Non-contact cooling water
c.
Boiler feeding
d.
Process
e.
Sanitary
f.
Air pollution control
g.
Contained in product
h.
Plant and equipment washdown
i.
Irrigation and lawn watering
j.
Other
k.
Total of a through j
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
5
SECTION D SEWER INFORMATION
1.
a. For an existing business:
Is the building presently connected to the public sanitary sewer system?
Yes
Sanitary sewer account number
No
Have you applied for a sanitary sewer hookup?
Yes
No
b. For a new business:
(i).
Will you be occupying an existing vacant building
(such as in an industrial park)?
Yes
No
(ii).
Have you applied for a building permit if a new facility will be
constructed?
Yes
No
(iii).
Will you be connected to the public sanitary sewer system?
Yes
No
2.
List size, descriptive location, and flow of each discharge pipe or discharge point which connects to the City’s
sewer system. (If more than three, attach additional information on another sheet.)
Descriptive Location of Sewer
Connection or Discharge Point
Average Flow
(GPD)
Permit Application Form
6
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION E WASTEWATER DISCHARGE INFORMATION
1.
Does (or will) this facility discharge any wastewater other than from restrooms to the City sewer?
Yes
If the answer to this question is “yes,” complete the remainder of the application.
No
If the answer to this question is “no,” skip to Section I.
2.
Provide the following information on wastewater flow rate. [New facilities may estimate.]
a. Hours/day discharged (e.g., 8 hours/day)
M
T
W
TH
F
SAT
SUN
b. Hours of discharge (e.g., 9 a.m. to 5 p.m.)
M
T
W
TH
F
SAT
SUN
c. Peak hourly flow rate
(GPD)
d. Maximum daily flow rate
(GPD)
e. Annual daily average
(GPD)
3.
If batch discharge occurs or will occur, indicate: [New facilities may estimate.]
a. Number of batch discharges
(per day)
b. Average discharge per batch
(GPD)
c. Time of batch discharges
(days of week)
(hours of day)
d. Flow rate
(gallons per minute)
e. Percent of total discharge
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
7
4.
Schematic Flow Diagram For each major activity in which wastewater is or will be generated, draw a
diagram of the flow of materials, products, water, and wastewater from the start of the activity to its
completion, showing all unit processes. Indicate which processes use water and which generate wastestreams.
Include the average daily volume and maximum daily volume of each wastestream [new facilities may
estimate]. If estimates are used for flow data this must be indicated. Number each unit process having
wastewater discharges to the community sewer. Use these numbers when showing this unit processes in the
building layout in Section H.
Permit Application Form
8
January 2016
Baton Rouge Industrial Pretreatment Program
5.
List average wastewater discharge, maximum discharge, and type of discharge (batch, continuous, or both), for
each plant process. Include the reference number from the process schematic that corresponds to each process.
[New faculties should provide estimates for each discharge].
No.
Process Description
Average Flow
(GPD)
Maximum
Flow (GPD)
Type of Discharge
(batch, continuous, none)
6.
List the average wastewater discharge, maximum discharge, and type of discharge (batch, continuous, or both)
for each of nonprocess wastewater flows (i.e., cooling tower blowdown, boiler blowdown)
No.
Nonprocess Description
Average
Flow (GPD)
Maximum
Flow (GPD)
Type of Discharge
(bath, continuous, none)
7.
Do you have, or plan to have, automatic sampling equipment or continuous wastewater flow equipment at this
facility?
Yes
No
N/A
Current
Flow Metering
Sampling Equipment
Planned
Flow Metering
Sampling Equipment
If so, please indicate the present or future location of this equipment on the sewer schematic and describe the
equipment below:
8.
Are any process changes or expansions planned during the next three years that could alter wastewater
volumes or characteristics? Consider production processes as well as air or water pollution treatment
processes that may affect the discharge.
Yes
No, (skip to Question 10)
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
9
9.
Briefly describe these changes and their effects on the wastewater volume and characteristics: (attach
additional sheets if needed).
10.
Are any recycling or reclamation system in use or planned?
Yes
No (skip to Question 12)
11.
Briefly describe recovery process, substance recovered, percent recovered, and the concentration in the spent
solution. Submit a flow diagram for each process (attach additional sheets if needed):
Permit Application Form
10
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION F CHARACTERISTICS OF DISCHARGE
All current industrial users are required to submit monitoring data on all pollutants that are regulated
specific to each process. Use the tables provided in this section to report the analytical results. Do not
leave blanks. For all other (nonregulated) pollutants, indicate whether the pollutant is known to be present
(P), suspected to be present (S), or known not to be present (O), by placing the appropriate letter
in the column for average reported values. Indicate on either the top of each table, or on a separate sheet,
if necessary, the sample location and type of analysis used. Be sure methods conform to 40 CFR Part 136;
if they do not, indicate what method was used.
New dischargers should use the table to indicate what pollutants will be present or are suspected to be
present in proposed wastestreams by placing a P (expected to be present), S (may be present), or O (will
not be present) under the average reported values.
Pollutant
Detection
Level Used
Maximum Daily
Value
Average of
Analyses
Number
of
Analyses
Units
Conc.
Mass
Conc.
Mass
Conc.
Mass
Acenaphthene
Acrolein
Acrylonitrile
Benzene
Benzidine
Carbon Tetrachloride
Chlorobenzene
1,2,4-Trichlorobenzene
Hexachlorobenzene
1,2-Dichloroethane
1,1,1-Trichloroethane
1,1,2,2,-Tetrachloroethane
Chloroethane
Bis(2-Chloroethyl)ether
17 Bis (chloro methyl) ether
2-Chloroethyl vinyl Ether
2-Chloronaphthalene
2,4,6-Trichlorophenol
Parachlorometa cresol
Chloroform
2-Chlorophenol
1,2-Dichlorobenzene
1,3-Dichlorobenzene
1,4-Dichlorobenzene
3,3'-Dichlorobenzidine
1,1-Dichloroethylene
1,2-Trans-Dichloroethylene
2,4-Dichlorophenol
1,2-Dichloropropane
1,2-Dichloropropylene
1,3-Dichloropropylene
2,4-Dimethylphenol
2,4-Dinitrotoluene
2,6-Dinitrotoluene
1,2-Diphenylhydrazine
Ethylbenzene
Fluoranthene
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
11
Pollutant
Detection
Level Used
Maximum Daily
Value
Average of
Analyses
Number
of
Analyses
Units
Conc.
Mass
Conc.
Mass
Conc.
Mass
4-Chlorophenyl Phenyl Ether
4-Bromophenyl Phenyl Ether
Bis(2-Chloroethyl)ether
Bis(2-chloroethoxy)methane
Methylene Chloride
Methyl Chloride
Bromoform
Dichlorobromomethane
Chlorodibromomethane
Hexachlorobutadiene
Hexachlorocyclopentadiene
Isophorone
Naphthalene
Nitrobenzene
Nitrophenol
2-Nitrophenol
4-Nitrophenol
2,4-Dinitrophenol
4,6-Dinitro-O-Cresol
N-Nitrosodimethylamine
N-Nitrosodiphenylamine
N-Nitrosodi-N-Propylamine
Pentachlorophenol
Phenol
Bis(2-ethylyhexyl)phthalate
Butylbenzyl Phthalate
Di-N-Butyl Phthalate
Di-N-Octyl Phthalate
Diethyl Phthalate
Dimethyl Phthalate
Benzo(a)anthracene
Benzo(a)pyrene
3,4-Benzofluoranthene
Benzo(k)fluoranthene
Chrysene
Acenaphthylene
Anthracene
Benzo(ghi)perylene
Fluorene
Phenanthrene
Dibenzo(a,h)anthracene
Indeno(1,2,3-cd)pyrene
Pyrene
Tetrachloroethylene
Toluene
Trichloroethylene
Vinyl Chloride
Aldrin
Dieldrin
Chlordane
4,4'-DDT
4,4’-DDE
Permit Application Form
12
January 2016
Baton Rouge Industrial Pretreatment Program
Pollutant
Detection
Level Used
Maximum Daily
Value
Average of
Analyses
Number
of
Analyses
Units
Conc.
Mass
Conc.
Mass
Conc.
Mass
4,4'-DDD
Alpha-Endosulfan
Beta-Endosulfan
Endosulfan Sulfate
Endrin
Endrin Aldehyde
Heptachlor
Heptachlor Epoxide
Alpha-BHC
Beta-BHC
Gamma-BHC
Delta-BHC
PCB-1242
PCB-1254
PCB-1221
PCB-1232
PCB-1248
PCB-1260
PCB-1016
Toxaphene
(TCDD)
Asbestos
Acidity
Alkalinity
Bacteria
BOD
3
Chloride
Chlorine
Fluoride
Hardness
Magnesium
NH
3
-N
Oil and Grease
TSS
TOC
Kjeldahl N
Nitrate N
Nitrite N
Organic N
Orthophosphate P
Phosphorous
Sodium
Specific Conductivity
Sulfate (SO
4
)
Sulfide (S)
Sulfite (SO
3
)
Antimony
Arsenic
Barium
Beryllium
Cadmium
Chromium
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
13
Pollutant
Detection
Level Used
Maximum Daily
Value
Average of
Analyses
Number
of
Analyses
Units
Conc.
Mass
Conc.
Mass
Conc.
Mass
Copper
Cyanide
Lead
Mercury
Nickel
Selenium
Silver
Thallium
Zinc
Any additional pollutants
regulated by state or local
laws:
Permit Application Form
14
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION G - TREATMENT
1.
Is any form of wastewater treatment (see list below) practiced at this facility?
Yes
No
2.
Is any form of wastewater treatment (or changes to an existing wastewater treatment) planned for this facility
within the next three years?
Yes, describe:
No
3.
Treatment devices or processes used or proposed for treating wastewater or sludge (check as many as
appropriate).
Air flotation
Centrifuge
Chemical precipitation
Chlorination
Cyclone
Filtration
Flow equalization
Grease or oil separation, type:
Grease trap
Grinding filter
Grit removal
Ion exchange
Neutralization, pH correction
Ozonation
Reverse osmosis
Screen
Sedimentation
Septic tank
Solvent separation
Spill protection
Sump
Rainwater diversion or storage
Biological treatment, type:
Other chemical treatment, type:
Other physical treatment, type:
Other, type:
4.
Is process wastewater mixed with nonprocess wastewater prior to the sampling point?
Yes, describe:
No
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
15
4.
Description
Describe the pollutant loadings, flow rates, design capacity, physical size, and operating procedures of each
treatment facility checked above.
5.
Attach a process flow diagram for each existing treatment system. Include process equipment, by-products,
by-product disposal method, waste and by-product volumes, and design and operating conditions.
6.
Describe any changes in treatment or disposal methods planned or under construction for the wastewater
discharge to the sanitary sewer. Please include estimated completion dates.
7.
Do you have a treatment operator?
Yes
No
(If Yes)
Name:
Title:
Phone:
Full time (specify hours):
Part time (specify hours):
8.
Do you have a manual on the correct operation of your
treatment equipment?
Yes
No
9.
Do you have written maintenance schedule for your treatment
equipment?
Yes
No
Permit Application Form
16
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION H FACILITY OPERATIONAL CHARACTERISTICS
1.
Shift Information
Work days
Mon
Tues
Wed
Thur
Fri
Sat
Sun
Shifts per work day
Employees per shift
1
st
2
nd
3
rd
Shift start and end times
1
st
2
nd
3
rd
2.
Indicate whether the business activity is:
Continuous through the year, or
Seasonal (circle the months of the year during which the business occurs):
J
F
M
A
M
J
J
A
S
O
N
D
Comments:
3.
Indicate whether the facility discharge is:
Continuous through the year, or
Seasonal (circle the months of the year during which the business occurs):
J
F
M
A
M
J
J
A
S
O
N
D
Comments:
4.
Does operation shut down for vacation, maintenance, or other reasons?
Yes, indicate reasons and period when shutdown occurs
No
5.
List types and amounts (mass or volume per day) of raw materials used or planned for use (attach list if
needed):
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
17
6.
List types and quantity of chemicals used or planned for use (attach list if needed). Include copies of Material
Safety Data Sheets (if available) for all chemicals identified.
Chemical
Quantity
7.
Building Layout Draw to scale the location of each building on the premises. Show map orientation and
location of all water meters, storm drains, numbered unit processes (from schematic flow diagram), public
sewers, and each facility sewer line connected to the public sewers. Number each sewer and show existing
and proposed sampling locations.
A blueprint or drawing of the facilities showing the above items may be attached in lieu of submitting a
drawing on this sheet.
Permit Application Form
18
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION I SPILL PREVENTION
1.
Do you have chemical storage containers, bins, or ponds at your facility?
Yes
No
If yes, please give a description of their location, contents, size, type, and frequency and method of cleaning.
Also indicate in a diagram or comment on the proximity of these containers to a sewer or storm drain. Indicate
if buried metal containers have cathodic protection.
2.
Do you have floor drains in your manufacturing or chemical storage area(s)?
Yes
No
If yes where do they discharge to?
3.
If you have chemical storage containers, bins, or ponds in manufacturing area, could an accidental spill lead to
a discharge to (check all that apply):
an onsite disposal system
public sanitary sewer system (e.g., through a floor drain)
storm drain
to ground
other, specify:
not applicable, no possible discharge to any of the above routes
4.
Do you have an accidental spill prevention plan (ASPP) to prevent spills of chemicals or slug discharges from
entering the Control Authority’s collection systems?
Yes [Please enclose a copy with the application.]
No
N/A, not applicable since there are no floor drains and/or the facility discharge(s) only domestic wastes.
5.
Please describe below any previous spill events and remedial measures taken to prevent their reoccurrence.
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
19
SECTION J BEST MANAGEMENT PRACTICES
1.
Describe the types of best management practices (BMPs) you employ to prevent pollutants from entering a
facility’s wastestream or from reaching a discharge point. BMPs are management and operational procedures
such as schedules of activities, prohibitions of practices, maintenance procedures, and other management
practices to implement the general and specific prohibitions listed in 40 CFR 403.5(a)(1) and (b). BMPs also
include treatment requirements, operating procedures, and practices to control plant site runoff, spillage or
leaks, sludge or waste disposal, or drainage from raw materials storage.
2.
Do you have the potential for a slug discharge to the sewer system? A slug discharge
is any discharge of a non-routine episodic nature, including but not limited to an
accidental spill or a non-customary batch discharge, which has a reasonable potential
to cause interference or pass through, or in any other way violate the POTW’s
regulations, local limits or permit conditions [40 CFR 403.8(f)(2)(v).
Yes
No
Please describe the type of the potential slug discharge, including quality and content.
Please describe current mechanisms for prevention of slug discharges.
Please describe where and how raw materials are stored.
Permit Application Form
20
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION K NON-DISCHARGED WASTES
1.
Are any waste liquids or sludges generated and not disposed of in the sanitary sewer system?
Yes, please describe below
No, skip the remainder of Section J
Waste Generated
Quantity (per year)
Disposal Method
2.
Indicate which wastes identified above are disposed of at an off-site treatment facility and which are disposed
of on-site.
3.
If any of your wastes are sent to an off-site centralized waste treatment facility, identify the waste and the
facility.
4.
If an outside firm removes any of the above checked wastes, state the name(s) and address(es) of all waste
haulers:
a.
b.
Permit No. (if applicable):
Permit No. (if applicable):
5.
Have you been issued any Federal, State, or local environmental permits?
Yes
No
If yes, please list the permit(s):
6.
Describe where and how waste liquids and sludges are stored.
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
21
SECTION L AUTHORIZED SIGNATURES
Compliance certification:
1.
Are all applicable Federal, State, or local pretreatment standards and requirements being met on a consistent
basis?
Yes
No
Not yet discharging
2.
If No:
a.
What additional operations and maintenance procedures are being considered to bring the facility into
compliance? Also, list additional treatment technology or practice being considered in order to bring the
facility into compliance.
b.
Provide a schedule for bringing the facility into compliance. Specify major events planned along with
reasonable completion dates. Note +that if the Control Authority issues a permit to the applicant, it may
establish a schedule for compliance different from the one submitted by the facility.
Milestone Activity
Completion Date
Permit Application Form
22
January 2016
Baton Rouge Industrial Pretreatment Program
Authorized Representative Statement
I certify under penalty of law that this document and all attachments were prepared under my
direction or supervision in accordance with a system designed to assure that qualified personnel properly
gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage
the system, or those persons directly responsible for gathering the information, the information submitted
is, to the best of my knowledge and belief, true, accurate, and complete. I am aware that there are
significant penalties for submitting false information, including the possibility of fine and imprisonment
for knowing violations.
Name(s) Title
Signature Date Phone
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
23
INSTRUCTIONS TO FILL OUT WASTEWATER DISCHARGE PERMIT APPLICATION
The permit application must be completed through question E.1. If you answer “no to question E.1., you
may skip to Section I. Otherwise, if a question is not applicable, indicate so on the form. Instructions to
some questions on the permit application are given below.
SECTION A INSTRUCTIONS (GENERAL INFORMATION)
1. Enter the facility’s official or legal name. Do not use a colloquial name.
a. Operator Name: Give the name, as it is legally referred to, of the person, firm, public
organization, or any other entity which operates the facility described in this application. This
may or may not be the same name as the facility.
b. Indicate whether the entity which operates the facility also owns it by marking the appropriate
box:
(i) If the response is “No,” clearly indicate the operator’s name and address and submit a copy of
the contract and/or other documents indicating the operator’s scope of responsibility for the
facility.
2. Provide the physical location of the facility that is applying for a discharge permit.
3. Provide the mailing address where correspondence from the Control Authority may be sent.
4. Provide all the names of the authorized signatories for this facility for the purposes of signing all
reports. The designated signatory is defined as:
a. A responsible corporate officer, if the Industrial User submitting the reports is a corporation. For
the purpose of this paragraph, a responsible corporate officer means:
(i) a president, secretary, treasurer, or vice-president of the corporation in charge of a principal
business function, or any other person who performs similar policy- or decision-making
functions for the corporation, or
(ii) the manager of one or more manufacturing, production, or operating facilities, provided, the
manager is authorized to make management decisions which govern the operation of the
regulated facility including having the explicit or implicit duty of making major capital
investment recommendations, and initiate and direct other comprehensive measures to assure
long-term environmental compliance with environmental laws and regulations; can ensure
that the necessary systems are established or actions taken to gather complete and accurate
information for control mechanism requirements; and where authority to sign documents has
been assigned or delegated to the manager in accordance with corporate procedures.
b. A general partner or proprietor if the Industrial User submitting the reports is a partnership or sole
proprietorship respectively.
c. The principal executive officer or director having responsibility for the overall operation of the
discharging facility if the Industrial User submitting the reports is a Federal, State, or local
governmental entity, or their agents.
Permit Application Form
24
January 2016
Baton Rouge Industrial Pretreatment Program
d. A duly authorized representative of the individual designated in paragraph (a), (b), or (c) of this
section if:
(i) the authorization is made in writing by the individual described in paragraph (a), (b), or (c);
(ii) the authorization specifies either an individual or position having responsibility for the
overall operation of the facility from which the Industrial Discharge originates, such as the
position of plant manager, operator of a well, or well field superintendent, or a position of
equivalent responsibility, or having overall responsibility for environmental matters for the
company; and
(iii) the written authorization is submitted to the City.
e. If an authorization under paragraph (d) of this section is no longer accurate because a different
individual or position has responsibility for the overall operation of the facility, or overall
responsibility for environmental matters for the company, a new authorization satisfying the
requirements of paragraph (d) of this section must be submitted to the City prior to or together
with any reports to be signed by an authorized representative.
5. Provide the name of a person who is thoroughly familiar with the facts reported on this form and who
can be contacted by the Control Authority (e.g., the plant manager).
SECTION B INSTRUCTIONS (BUSINESS OPERATIONS)
1. Check off all operations that occur or will occur at your facility. If you have any questions regarding
how to categorize your business activity, contact the Control Authority for technical guidance.
2. Provide a brief narrative description of all operations at this facility.
3. For all processes found on the premises, indicate the NAICS (North America Industry Classification
System) code which replaces the Standard Industrial Classification (SIC) system. To determine the
NAICS code for a facility see North American Industry Classification System--United States, 2002
which includes definitions for each industry, tables showing correspondence between 2002 NAICS
and 1997 NAICS for codes that changed, and a comprehensive index--features also available on this
web site. To order the 1400-page 2002 Manual, in print, call NTIS at (800) 553-6847 or (703) 605-
6000, or check the NTIS web site. The 1250-page 1997 Manual, showing correspondence between
1997 NAICS and 1987 SIC, is also available. The 2002 and 1997 versions of NAICS are available on
CD-ROMs, which can be ordered at NTIS. See http://www.census.gov/epcd/www/naics.html which
lists NAICS codes and definitions for each industry.
4. List the types of products, giving the common or brand name and the proper or scientific name. Enter
from your records the average and maximum amounts produced daily for each operation for the
previous calendar year, and the estimated total daily production for this calendar year. Be sure to
specify the daily units of production. Attach additional pages as necessary.
5. Provide the facility’s long-term average production value for the past 5 years.
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
25
SECTION C INSTRUCTION (WATER SUPPLY)
4. Provide daily average water usage within the facility. Contact cooling water is cooling water that
during the process comes into contact with process materials, thereby becoming contaminated. Non-
contact cooling water does not come into contact with process materials. Sanitary water includes only
water used in restrooms. Plant and equipment washdown includes floor washdown. If sanitary flow is
not metered, provide an estimate based on 15 gallons per day (gpd) for each employee.
Permit Application Form
26
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION E INSTRUCTION (WASTEWATER DISCHARGE INFORMATION)
1. If you answer “no” to this question, skip to Section I, otherwise complete the remainder of the
application.
4. A schematic flow diagram is required to be completed and certified for accuracy by a State registered
professional engineer. Assign a sequential reference number to each process starting with No. 1. An
example of a drawing is shown below in Figure 1. To determine your average daily volume and
maximum daily volume of wastewater flow, you may have to read water meters, sewer meters, or
make estimates of volumes that are not directly measurable.
Figure 1. Schematic Flow Diagram
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
27
5. Users should report average daily and daily maximum wastewater flows from each process,
operation, or activity present at the facility. Categorical users should report average daily and
maximum daily wastewater flows from every regulated, unregulated, and dilution process. A
regulated wastestream is defined as wastewater from an industrial process that is regulated for a
particular pollutant by a categorical pretreatment standard. Unregulated wastestreams are
wastestreams from an industrial process that are not regulated by a categorical pretreatment standard
and are not defined as a dilution wastestream. Dilution wastestreams include sanitary wastewater,
boiler blowdown, noncontact cooling water or blowdown, stormwater streams, demineralized
backwash streams and process wastestreams from certain industrial subcategories exempted by EPA
from categorical pretreatment standards. [For further details see 40 CFR 403.6 (e).]
6. Users should report the average daily and daily maximum wastewater flows for each nonprocess
wastewater flows. Nonprocess wastewater flows include, but are not limited to, cooling tower
blowdown and boiler blowdown.
SECTION F INSTRUCTION (CHARACTERISTICS OF DISCHARGE)
Provide the results of sampling and analysis identifying the nature and concentration (or mass, if required)
or regulated pollutants in the discharge from each regulated process. Both daily maximum and average
concentration values (or mass, if required) must be reported. The sample must be representative of daily
operations.
If the User is subject to categorical effluent limits, the user must take a minimum of one representative
sample to compile the necessary data. Samples should be taken immediately downstream from
pretreatment facilities if such exists or immediately downstream from the regulated process if no
pretreatment exists. If other wastewaters are mixed with the regulated wastewater prior to pretreatment,
the user should measure the flows and concentrations. Sampling and analysis must be performed in
accordance with the techniques prescribed in 40 CFR part 136 and amendments thereto. Furthermore, the
date and place, and the methods of analysis must be submitted with the application.
Historical data may be used if the data provides sufficient information to determine the need for industrial
pretreatment measures.
Permit Application Form
28
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION H INSTRUCTION (FACILITY OPERATIONAL CHARACTERISTICS)
2. Indicate whether the business activity is continuous throughout the year or if it is seasonal. If the
activity is seasonal, circle the months of the year during which the discharge occurs. Make any
comments you feel are required to describe the variation in operation of your business activity.
4. Indicate any shut downs in operation which may occur during the year and indicate the reasons for
shutdown.
5. Provide a listing of all primary raw materials used (or planned) in the facility’s operations. Indicate
amount of raw material used in daily units.
6. Provide a listing of all chemicals used (or planned) in the facility’s operations. Indicate the amount
use of planned in daily units. Avoid the use of trade names of chemicals. If trade names are used, also
provide chemical compounds. Provide copies of all available material safety data sheets for all
chemical identified.
7. A building layout or plant site plan of the premises is required to be completed and certified for
accuracy by a State registered professional engineer. Approved building plans may be submitted. An
arrow showing North as well as the map scale must be shown. The location of each existing and
proposed sampling location and facility sewer line must be clearly identified as well as all sanitary
and wastewater drainage plumbing. Number each unit process discharging wastewater to the public
sewer. Use the same number system shown in Figure 2, the schematic flow diagram. An example of
the drawing required is shown below.
Baton Rouge Industrial Pretreatment Program
Permit Application Form
January 2016
29
Figure 2. Building Layout
Permit Application Form
30
January 2016
Baton Rouge Industrial Pretreatment Program
SECTION I INSTRUCTION (SPILL PREVENTION)
5. Describe how the spill occurred, what was spilled, when the spill happened, where it occurred, how
much was spilled, and whether or not the spill reached the sewer. Also explain what measures have
been taken to prevent a reoccurrence or what measures have been taken to limit damage if another
spill occurs.
SECTION J INSTRUCTIONS (NON-DISCHARGED WASTES)
1. For wastes not discharged to the Control Authority’s sewer, indicate types of waste generated,
amount generated, the way in which the waste is disposed (e.g., incinerated, hauled, etc.), and the
location of disposal.
2. Onsite disposal system could be a septic system, lagoon, holding pond (evaporative-type), etc.
5. Types of permits could be: air, hazardous waste, underground injection, solid waste, NPDES (for
discharges to surface water), etc.
SECTION K INSTRUCTIONS (AUTHORIZED SIGNATURES)
See instructions for question 4 in Section A, for a definition of an authorized representative.