SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® Tamper Resistant Receptacles and Plugs
369-269 b 1 08.18.10
(RP-FDU-10-WH Shown)
Lutron® Tamper Resistant Receptacles
and Plug for Dimming use
Tamper resistant receptacles, unlike traditional
receptacles, offer the added protection of a permanently
installed, spring-loaded slider mechanism capable of
resisting insertion of single pronged elements (such
as keys, hairpins, or nails) while still allowing access
to electrical plugs. Lutron Tamper Resistant Receptacles
are compliant with article 406.11 of the 2008 National
Electric Code (NEC®).
The NEC prohibits the dimming of standard receptacles.
The dimmable outlets of the Dual Dimming Tamper
Resistant (DDTR) and Half Dimming Tamper Resistant
(HDTR) are specifically designed to mechanicaly reject all
NEMA standard plugs and thus can not be used for any
other device (fan, heater, vacuum, radio, etc.). These
receptacles will only accept the special mating Lutron
replacement plug for dimming use (RP-FDU). The
result is an NEC compliant way to control a portable
lamp with a dimmer.
15 Amp Tamper Resistant Receptacles
(xx in model number represents color/finish code.)
Model Rating
CAR-15-DDTR-XX 15 A 125 V 60 Hz
CAR-15-HDTR-XX 15 A 125 V 60 Hz
SCR-15-DDTR-XX 15 A 125 V 60 Hz
SCR-15-HDTR-XX 15 A 125 V 60 Hz
* NTR-15-DDTR-XX 15 A 125 V 60 Hz
* NTR-15-HDTR-XX 15 A 125 V 60 Hz
20 Amp Tamper Resistant Receptacles
(xx in model number represents color/finish code.)
Model Rating
CAR-20-DDTR-XX 20 A 125 V 60 Hz
CAR-20-HDTR-XX 20 A 125 V 60 Hz
SCR-20-DDTR-XX 20 A 125 V 60 Hz
SCR-20-HDTR-XX 20 A 125 V 60 Hz
* NTR-20-DDTR-XX 20 A 125 V 60 Hz
* NTR-20-HDTR-XX 20 A 125 V 60 Hz
Replacement Plug for Dimming Use
Model Rating
** RP-FDU-10-XX 10 A 125 V
60 Hz
Key Design Features:
• Features on receptacle(s) for dimming use reject
standard plugs
• Uses standard switched receptacle wiring
(HDTR requires two separate live/hot feeds)
(CAR-20-DDTR-WH Shown)
• Permanently installed internal tamper resistant shutter
mechanism capable of resisting insertion of foreign
elements into the device
• Specification grade construction
• Back wire installation capable
• Receptacle face compatible with NEMA designer and
Nova T opening wallplates *
• Plug may be used with standard receptacles and with new
receptacles designed for dimming use
• Plug is compatible with 18 AWG (0.75 mm
2
) SPT-2 lamp cords
• Plug uses split-shell design for easy wiring and the ability
to control cord exit direction
• Compliant with article 406.11 of the 2008 National Electric
Code (NEC )
*
receptacles ship with wallplate
** Replacement plug available in White (WH) or Brown (BR) only
