Fillable Drapery Track System Lutron Drapery Track System Chassis (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Drapery Track System Lutron Drapery Track System Chassis (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Drapery Track System Lutron Drapery Track System Chassis (Lutron Electronics, Inc.)

On average this form takes 28 minutes to complete

The Drapery Track System Lutron Drapery Track System Chassis (Lutron Electronics, Inc.) form is 22 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 112 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 1 10.23.17
Drapery Track System
The Lutron drapery track utilizes the ultra-quiet, precision controlled Electronic Drive Unit. It controls the movement
of the drape, adjusting it to the user’s desired positions.
Features
• Smooth, ultra-quiet operation
• Draperies start, move, and stop with precision
• Offers programmable stop points
• Single, dual, curved, single-tandem and
dual-tandem tracks available
• Easy-to-read and easy-to-use controls
• Available in right, left, and center draw
configurations
• Does not require group controllers or relay
systems to create drapery groups and sub-groups
• Can be installed in new construction or
retrofit application
• Power failure memory for the lifetime of
the product
• Operates up to 175 lb (79.4 kg) draperies
• Manual open feature option available (not available with
all drive models; for more information, refer to your
ordering tool or contact Lutron Customer Service)
• Track splicing option available with up to
two splices per track
• Available in pinch pleat and ripplefold pleat styles
• 8 year limited warranty
Electronic
Drive Unit
Right Draw, Right Drive
System Shown
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 2 10.23.17
Drive Belt
Idler Gear Housing
Track
Plug
Track
Optional
Manual Open
Master Carrier
Available
Electronic Drive Unit
Auxiliary Carriers
Traditional
Master Carrier
Optional
Splicing Bar
System Components
One way draw
master carrier Drive end snap bracket
Idler end snap bracket Drive end snap bracket
One Way Draw, Ripplefold Components
Center draw master carrier
Center Draw Ripplefold Components
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 3 10.23.17
Straight Drapery Track Options (pinch pleat carriers shown)
Center-draw, left or right drive (right drive shown)
Left draw, left drive
Right draw, right drive
Tandem draw, left and right drives
NOTE
Valance and drapery fabric panel not included
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specifi cation
086123d 4 10.23.17
Standard Curved Drapery Track Options
Right draw, right drive, inside curve
Left draw, left drive, inside curve
Left draw, left drive, outside curve
Right draw, right drive, outside curve
Minimum Drive Leg Length (D) – 22
7
⁄8 in (581 mm)
Minimum Idler Leg Length (B) – 23
1
⁄8 in (587 mm)
One leg can be up to 72 in (1829 mm) while the other leg can be up to 144 in (3658 mm).
Left draw, left drive, outside curve
B
D
D
B
D
B
B
D
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specifi cation
086123d 5 10.23.17
Standard Curved Drapery Track Options (continued)
Center draw, right drive, inside curve
Center draw, left drive, outside curve
Center draw, right drive, outside curve
Center draw, left drive, inside curve
B
D
D
B
D
B
B
D
5
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specifi cation
086123d 6 10.23.17
Center draw, tandem (right and left drive), inside curve
Center draw, tandem (right and left drive), outside curve
Standard Curved Drapery Track Options (continued)
B
D
D
B
D
D
Note:
Dimension B and D do not include any wall offsets. When providing dimensions B and D, account for the
wall offset to ensure the drapery track will fi t properly in the desired location. The factory DOES NOT take any
deductions from the provided dimensions. Refer to page 8 for recommended minimum offsets.
6
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 7 10.23.17
System dimensions
Top view (single track, right draw)
2.1 in (52 mm)
1.3 in (32 mm)1.6 in (42 mm)
Track width 18 ft (5.5 m) max without splice
Up to 30 ft (9.1 m) with splice (2 splice max)
3.3 in
(84 mm)
10.6 in
(270 mm)
Front view (single track, right draw)
8.89 in
(226 mm)
3.3 in
(84 mm)
2.1 in
(52 mm)
Electronic Drive Unit
1.9 lbs (0.9 kg)
7
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 8 10.23.17
Corner application
Lutron drapery tracks can be used in corner applications.
Dual drapery track system
Lutron
® drapery tracks can be used for a combination
sheer/blackout treatment.
Single, tandem drapery track system
The accuracy of movement and speed control of the Lutron
drapery track system allows two independent systems to be
used to create a center draw drape.
(wall mount shown)
(wall mount shown)
(wall mount shown)
Dimensions
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
5.5 in (140 mm)
Dimensions
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
Single drapery track system
Maintain enough clearance between the drapery track and the inside face of the
top treatment or ceiling recess to allow the fabric to move freely.
8
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 9 10.23.17
Ceiling bracket cam lock
Bracket Options
Lutron drapery track is available in either wall mount or ceiling mount.
Ceiling mount bracket
top view of clip arm extended
in unlocked position
1.3 in
(33 mm)
closing
direction
Ceiling mount application
Pocket mount application
Wall-mount bracket
Wall mount application
1.2 in
(31 mm)
1.2 in
(31 mm)
1.3 in
(33 mm)
1.3 in
(33 mm)
6.0 in (152 mm) minimum
9
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 10 10.23.17
Wall Mount Bracket
Minimum extension
3.5 in (89 mm)
6.6 in (170 mm)
6 in (152 mm)
4.1 in (108 mm)
1.7 in
(43 mm)
1.7 in
(43 mm)
1.2 in
(31 mm)
1.2 in
(31 mm)
2.7 in
(70 mm)
2.7 in
(70 mm)
Maximum extension
10
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 11 10.23.17
Dual Wall Mount Bracket
Minimum extension
Maximum extension
9.6 in (248 mm)
9 in (229 mm)
3.5 in (89 mm)
6 in (152 mm)
11.5 in (292 mm)
12.1 in (311 mm)
4.6 in
(118 mm)
4.6 in
(118 mm)
1.2 in (31 mm)
1.2 in (31 mm)
1.7 in (43 mm)
1.7 in (43 mm)
11
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 12 10.23.17
Recessed Mount Bracket
7 ¾ in (187 mm)
7 ¼ in (184 mm)
18 ¾ in (467 mm)
16 in (406 mm)
16 in (406 mm)
8
8
The track is predrilled with mounting holes, spaced as indicated below.
Mounting with wood screw
1½ inch Wood Screw
Structural Member
Recessed Mounting
Bracket
Drapery Track
2
7
⁄8 in (73 mm)
Minimum Recess Width
1
1
⁄16 in (27 mm)
Recess Depth*
* Provides complete concealment of the track while maintaining proper clearance for the drapery fabric below the recess.
A deeper recess will require additional width to clear the drapery fabric.
12
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 13 10.23.17
Splice (optional)
Track available with up to 2 splices
Splicing Bar
Track splicing is available as an
option with all straight Lutron
drapery track systems
Track with 1 splice
Minimum Length: 6 ft (1829 mm)
Maximum Length: 30 ft (9144 mm)
Track provided in 2 equal sections
Track with 2 splices
Minimum Length: 12 ft (3658 mm)
Maximum Length: 30 ft (9144 mm)
Track provided in 3 equal sections
Note:
To maximize durability while minimizing carrier noise, all ripplefold
configurations, and pinch pleat systems configured as Left or Right Draw
with 1 or 2 splices, and Center Draw with 2 splices, utilize carriers with
plastic wheels.
All other pinch pleat configurations utilize carriers with rubber wheels.
13
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 14 10.23.17
Return size minimum
4.68 in (119 mm)
minimum for wall
mount bracket
9.68 in (246 mm)
minimum for dual
mount bracket
Drapery fabric return
Drapery fabric
Pinch Pleat | Drapery Hook Setting
Drapes are typically sized so the bottom of the drapery track is located 4 in (101 mm) above the window casing.
Location may need to be adjusted to accommodate the specific drapery size and application. Lutron recommends
a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook (hooks not included).
This locates the drapes just below the track and prevents it from rubbing on the track. It is recommended that
a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of fabric panel and the floor.
1/2 in (13 mm)
Top of fabric panel
Floor
4 in
(100 mm)
Top of
window
Bottom of
drapery track
5/8 in
(16 mm)
1/2-1 in (13-25 mm)
Bottom of
fabric panel
Fabric
panel
height
+
5/8-1
1
⁄8 in
(16-29 mm)
14
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 15 10.23.17
NOTES
•
Drapery track
system compatible
with Graber
ripplefold snap tape
•
Tracks available in
3 fullness factors:
80%, 100%, 120%
Idler end snap bracket Center Draw
Master Carrier
Auxiliary Snap
locations
Drive end snap bracket
Center draw
Auxiliary Snap
locations
Drive end
snap bracket
One-way draw
One way draw
master carrier
Top of snap tape and
fabric panel
Floor
4 in
(101 mm)
Fabric panel height +
3/4-1 1/4 in
(19-32 mm)
Top of
window
1/2-1 in
(13-25 mm) Minimum
Bottom of
fabric panel
Ripplefold | Drapery Tape Assembly
The bottom of the drapery track is to be mounted such that it is located a distance of 1/2 in (13 mm) + fabric
panel height from the floor. Drapes are typically sized so the bottom of the drapery track and top of the fabric
panel are located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate
the specific fabric panel height and application. It is recommended that a space of 1/2-1 in (13-25 mm) be
maintained between the bottom of fabric panel and the floor.
Drive-end snap bracket
Idler end snap bracket Center draw master carriers
(Center-draw tracks only)
Snap tape
Fabric panel
1/2 in
(13 mm)
3/4 in
(19 mm)
15
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron Drapery Track System Chassis Specification
086123d 16 10.23.17
Snap Tape
Drapery Panel
Snap Tape
Drapery Panel
Snap Tape
Drapery Panel
Ripplefold
|
Drapery tape assembly (continued)
The Ripplefold drapery snap tape is attached to the top of the fabric panel by the drapery manufacturer. The
number of snaps required is based on the Track Width, Draw Type and Fullness of the drapery. Refer to the Shade
Configuration Tool (SCT) for the number of snaps required per panel for the given specifications. Left draw and
Right draw configurations require one fabric panel. Center draw and Tandem draw configurations require two fab-
ric panels. The Lutron Ripplefold drapery system is compatible with Graber snap tape, which has a spacing of 4
1/4 in (108 mm) between snaps. The Buttmaster Carriers and the End Snap Brackets, require the outermost snap
on both ends of the snap tape to be spaced 1 in (25 mm) from the adjacent snaps.
Left Draw and Right Draw Configurations
Number of Panels — 1
Snap Tape Type — Graber
Inner Snap Spacing — 4 1/4 in (108 mm) typical
End Snap Spacing — 1 in (25 mm)
Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness.
Refer to Shade Configuration Tool (SCT) for exact snap quantity.
Center Draw and Tandem Draw Configurations
Number of Panels — 2
Snap Tape Type — Graber
Inner Snap Spacing — 4 1/4 in (108 mm) typical
End Snap Spacing — 1 in (25 mm)
Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness.
Refer to Shade Configuration Tool (SCT) for exact snap quantity.
Varies based
on return distance
1 in
(25 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
1 in
(25 mm)
Varies based
on return distance
Varies
based on return
distance
1 in
(25 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
1 in
(25 mm)
Varies based
on return distance
1 in
(25 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
1 in
(25 mm)
Varies
based on return
distance
1 in
(25 mm)
typ
1 in
(25 mm)
typ
O
Lutron is a trademark of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
16
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Drapery Track System Lutron Drapery Track System Chassis (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 29 June 2022

Message

View Audit Log
Print With Audit Log
Duplicate Document