Fillable INDOOR LIGHTING INCENTIVES WORKSHEET (ComEd)

Fill Online, Printable, Fillable, Blank INDOOR LIGHTING INCENTIVES WORKSHEET (ComEd) Form

Use Fill to complete blank online COMED pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

INDOOR LIGHTING INCENTIVES WORKSHEET (ComEd)

On average this form takes 39 minutes to complete

The INDOOR LIGHTING INCENTIVES WORKSHEET (ComEd) form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 156 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your ComEd forms online.

BROWSE COMED FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
1
INDOOR LIGHTING INCENTIVES WORKSHEET
January 1 through December 31, 2021
Directions: Please save a copy of this form to your computer by selecting “File/Save As” before entering text and
numbers. Then fill in your information electronically and select “Save.” Note that this form requires Adobe Reader
®
version 11.0 to function properly. Download the most recent version of Adobe Acrobat Reader DC
®
at
http://get.adobe.com/reader.
General Specifications
1. Pre-application is required; review instructions on the standard incentives application form. Wait for
a reservation letter before starting your project.
2. All lighting projects are expected to comply with the Illuminating Engineering Society of North America (IESNA)
recommended lighting levels or the local code.
3. Original manufacturer’s specifications sheets must be submitted with the standard incentives application form to
verify measure eligibility. Measure eligibility information can be found under individual specifications in this
worksheet.
4. Lamp and ballast photographs will be required for certain fixture types, and must be submitted with the pre-
application. See the Default Fixture Wattage Reference Table on page 7 for specific fixture types. For example
photographs, see page 10.
5. Use baseline code IECC 2018 for new construction projects that involve a change in building and/or space type.
These projects may be eligible for custom incentives. Use the Specialty/New Construction Lighting Worksheet
available at ComEd.com/Custom.
6. A pending T12 baseline change may reduce future incentive levels on all T12 measures.
LED Fixtures and Retrofits (Please complete the watt reduction worksheet on the following page)
Specifications and Eligible Equipment
1. Product must be listed on the DesignLights Consortium Qualified Products List available at
designlights.org
2. Linear TLEDs type A and B, and trim kits/downlights are not eligible for standard incentives but may be eligible
for instant discounts when purchased from a participating distributor. Contact a distributor to check product
eligibility; visit ComEd.com/BizLights for details.
3. Wall packs are eligible for standard or instant discount incentives. Customers who receive an instant discount
through a participating distributor for wallpacks are not eligible to receive a standard incentive or vice versa.
LED Fixtures
$0.50 per watt reduced
Replacement of an existing interior lighting system with a new or lighting system containing LED fixtures (project
does not have to be a one-for-one replacement).
Note: This measure does not apply to channel signs, open signs or refrigerated display case lighting.
LED Retrofits
$0.50 per watt reduced
Replacement of an existing interior lighting system with a retrofit lighting system containing LEDs.
Note: This measure does not apply to channel signs, open signs, LED screw-based replacement for HID lamps or
refrigerated display case lighting.
Customer Name:
Watt Reduction Worksheet for LED Fixtures and Retrofits
Use this worksheet to calculate the incentives. (See example below).
TYPE OF EQUIPMENT
TO BE REPLACED
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
TYPE OF NEW FIXTURE
TO BE INSTALLED
(MODEL NUMBER)
QUANTITY
OF NEW
EQUIPMENT
WATTAGE OF
NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
example: 2-lamp
4-ft T12 34W
U-Lamps
100 72
example: LED
ARV2- 12/480/8CPT4
120 44 1,920
Total wattage reduction
LED Fixtures and Retrofits (per watt reduced) $0.50
INCENTIVE SUBTOTAL
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
2
$
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
3
LED Lighting
Specifications and Eligible Equipment
Replacement signs cannot use more than 20 percent of the original sign’s input power.
LED “Open” Sign
$40 per sign
Replacement of an existing neon “open” sign with an LED “open” sign.
Number of signs:
LED Channel Sign ≤ feet Interior
$12 per letter
Replacement or retrofit of an incandescent, HID, argon-mercury or
neon-lighted channel letter ≤ 2 feet high with an LED letter.
Number of letters:
LED Channel Sign > feet Interior
$30 per letter
Replacement or retrofit of an incandescent, HID, argon-mercury or
neon-lighted channel letter > 2 feet high with an LED letter.
Number of letters:
INCENTIVE SUBTOTAL:
$
To apply for incentives for lighting retrofits and replacements that are not listed above, please fill out the
Specialty/New Construction Lighting Worksheet located at ComEd.com/Custom.
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
4
Lighting Control Products
Use the watts controlled worksheet below to calculate watts controlled for each applicable measure.
Occupancy Sensors
$0.10 per watt controlled
Installation of new occupancy sensors on a new or existing lighting system. Passive
infrared, ultrasonic detectors and fixture-integrated sensors or sensors with a
combination thereof are eligible.
Specifications:
1. Replacement of existing occupancy sensors is not eligible for this incentive.
2. An inventory of the controlled fixtures is required with the final application.
Watts controlled:
Vacancy Sensors
$0.10 per watt controlled
Installation of new vacancy sensors on a new or existing lighting system. Passive infrared
and ultrasonic detectors are eligible.
Specifications:
1. Replacement of existing vacancy sensors is not eligible for this incentive.
2. The control must be configured such that manual input is required to turn on the
controlled lighting and the control automatically turns the lighting off.
3. An inventory of the controlled fixtures is required with the final application.
Watts controlled:
INCENTIVE SUBTOTAL
$
Watts Controlled Worksheet for Lighting Control Products
Use this worksheet to calculate watts controlled for each applicable measure.
TYPE OF SENSOR TYPE OF FIXTURE
(A)
NUMBER OF
FIXTURES
(B)
WATTS PER
FIXTURE
(A x B)
WATTS
CONTROLLED
example: occupancy 6-lamp 4-ft T8 100 220 22,000
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
5
Lighting Control Products
Use the watts controlled worksheet below to calculate watts controlled for each applicable measure.
Daylighting Controls
$0.12 per watt controlled
Installation of new daylighting controls on a new or existing lighting system in spaces
with reasonable amounts of sunlight exposure and areas where task lighting is not
critical. Controls can be on/off, stepped or continuous (dimming).
Specifications:
1. The on/off controller should turn off artificial lighting when the interior illuminance
meets the desired indoor lighting level.
2. Daylighting sensor controls are required to be calibrated.
3. An inventory of the controlled fixtures is required with the final application.
Watts controlled:
Time Clocks for Lighting
$0.03 per watt controlled
Installation of time clocks on interior and/or exterior lighting.
Specifications:
1. Clocks must control on/off schedule of lighting equipment and must have a three-hour
back-up system to maintain the program schedule during power outages.
2. Astronomical time clocks (where on-off times are in accordance with sunrise and
sunset) are required for outdoor lighting when photocells are not in use.
3. An inventory of the controlled fixtures is required with the final application.
Watts controlled:
INCENTIVE SUBTOTAL
$
Watts Controlled Worksheet for Lighting Control Products
Use this worksheet to calculate watts controlled for each applicable measure.
TYPE OF SENSOR TYPE OF FIXTURE
(A)
NUMBER OF
FIXTURES
(B)
WATTS PER
FIXTURE
(A x B)
WATTS
CONTROLLED
example: occupancy 6-lamp 4-ft T8 100 220 22,000
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
6
Lighting Control Products (continued)
Use the watts controlled worksheet below to calculate watts controlled for each applicable measure.
Plug-Load Occupancy Sensors
$10 per sensor installed
Installation of new passive infrared and/or ultrasonic plug load occupancy sensors.
Specifications:
1. Plug-load occupancy sensors must control electricity-using equipment in offices or
cubicles, including lighting, shared copiers and/or printers.
Number of sensors
installed:
Occupancy Sensors Plus Daylighting Controls
$0.18 per watt controlled
Installation of both occupancy sensors and daylighting controls to control the same fixture.
Specifications:
1. Must meet all specifications for occupancy sensors and daylighting controls, above.
2. An inventory of the controlled fixtures is required with the final application.
Watts controlled:
INCENTIVE SUBTOTAL:
$
Watts Controlled Worksheet for Lighting Control Products
Use this worksheet to calculate watts controlled for each applicable measure.
TYPE OF SENSOR TYPE OF FIXTURE
(A)
NUMBER OF
FIXTURES
(B)
WATTS PER
FIXTURE
(A x B)
WATTS
CONTROLLED
example: occupancy 6-lamp 4-ft T8 100 220 22,000
GRAND TOTAL INCENTIVE REQUESTED
$
Incentive cannot exceed 100 percent of the incremental measure cost and 75 percent of the total project cost and must
meet all program terms and conditions.
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
7
Default Fixture Wattage Reference Table
This table is to be used as a reference for determining the wattage of baseline (existing) fixtures. Wattages for all new
(proposed) fixtures should be referenced from the new product specifications.
There are many factors that affect the input wattage of a fixture: ballast factor, lamp quality, system voltage, etc. The
more information that is provided about your project, the more accurate the incentive and energy savings calculations
can be. If there is any doubt as to which fixture type is correct, the conservative wattage will be used. To ensure that
the wattages used in incentive calculations are as accurate as possible, pictures are required for all of the fixture
types listed below in red or with an asterisk(*).
This table is made up of the most common fixtures but does not include all fixture types. T12 fixtures are listed with
energy-saving (ES) magnetic ballasts and standard magnetic ballasts. If a fixture type is not listed on this table, it
does not necessarily mean that the fixture is not eligible for an incentive. Please visit ComEd.com/BizIncentives or
call us at 855-433-2700 if you have any questions.
T12
NUMBER OF
LAMPS PER
FIXTURE
2-FT 20W
LAMPS
3-FT 30W
LAMPS
4-FT 34W
U-LAMPS
4-FT 40W U-LAMP(S)
WITH ES MAGNETIC
BALLASTS (STANDARD
MAGNETIC BALLASTS)
4-FT 34W
LAMP(S) WITH
ES MAGNETIC
BALLAST
4-FT 34W
LAMP(S) WITH
STANDARD
MAGNETIC
BALLAST
4-FT 40W
LAMP(S) WITH
ES MAGNETIC
BALLAST
4-FT 40W
LAMP(S) WITH
STANDARD
MAGNETIC
BALLAST
1 28 37 43 40 50* 48* 57*
2 56 74 72 85* (96)* 68 80* 82* 94*
3 62 111 115 110 130* 122* 147*
4 112 148 139 160* 164* 182*
6 146 216 236* 258* 282*
8 288
T12 8-FT
NUMBER
OF LAMPS
PER
FIXTURE
60W
LAMP(S)
WITH ES
MAGNETIC
BALLAST
60W LAMP(S)
WITH
STANDARD
MAGNETIC
BALLAST
75W
LAMP(S)
WITH ES
MAGNETIC
BALLAST
75W LAMP(S)
WITH
STANDARD
MAGNETIC
BALLAST
HO 95W
LAMP(S) WITH
ES MAGNETIC
BALLAST
(STANDARD)
HO 110W
LAMP(S) WITH
ES MAGNETIC
BALLAST
(STANDARD)
VHO 185W
LAMP(S) WITH
MAGNETIC
BALLAST
T12 VHO 215W
LAMP(S) WITH
MAGNETIC
BALLAST
1 62 75 91* 100* 104* (112)* 132* (145)* 205* 230*
2 123 128 158* 173* 207* (227)* 237* (257)* 380* 450*
3 203 210 237* 311* (380)* 369* (392)* 585* 680*
4 246 256 316* 346* 414* (454)* 474* (514)* 760* 900*
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
8
T8
NUMBER OF
LAMPS PER
FIXTURE
2-FT 17W
LAMPS
3-FT 25W
LAMPS
4-FT 32W
U-LAMPS
4-FT RW 25W
LAMP(S)
4-FT RW 28W
LAMP(S)
4-FT 32W
LAMP(S)
(HIGH OUTPUT)
8-FT 59W
LAMP(S)
8-FT HO 86W
LAMP(S)
1 16 23 28 24 26 32 62 85*
2 32 46 56 44 50 59 124 160*
3 48 69 89 66 74 88 186
4 64 92 90 99 114 248 320*
5 148
6 134 134 175 (220)* 328
8 224 (294)*
T5
NUMBER OF
LAMPS PER
FIXTURE
2-FT 14W LAMPS 2-FT 24W HO
LAMPS
4-FT 28W LAMPS 4-FT 54W HO LAMP(S)
1 18 27* 32 62*
2 34 52* 64 117*
3 52 79* 96 179*
4 68 104* 128 240*
6 192 360*
8 256 468*
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
9
HID
NOMINAL
WATTS
PULSE START
METAL HALIDE
METAL HALIDE MERCURY VAPOR HPS
50 72 74 66
60 67
70 95 95
75 93
90 99
100 128* 125 138
140 153
150 190 188
175 208 215 205
200 232 250
210 229
250 288 295 290 295
310 365
315 343
350 400
400 456 455 455 465
450 506*
700 780*
750 818* 850* 835*
1000 1080* 1080* 1075* 1100*
1500 1610*
January 1 through December 31, 2021
INDOOR LIGHTING INCENTIVES WORKSHEET
10
Example Photographs
Lamp Stamp
Standard Magnetic Ballast
Energy Saver Ballast
Terms and conditions apply. Offers are subject to change.
Actual savings will vary by customer’s energy usage and rate.
© Commonwealth Edison Company, 2021
The ComEd Energy Efficiency Program is funded in compliance with state law.
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

INDOOR LIGHTING INCENTIVES WORKSHEET (ComEd)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 22 July 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document