RESIDENTIAL RE-ROOF APPLICATION
PLEASE PRINT OR TYPE
APPLICATION NO:_________________
General Information For Installing A Residential Roof
1.
Ice-barrier is required starting from the edge of the eave or soffit to a minimum of 24-inches inside the exterior wall line of the building.
2. All roof coverings shall be installed in accordance to the manufacturer’s instructions.
3. A minimum of 15-pound felt shall be used. 30-pound may be required for low slope applications; follow manufacturer’s instructions.
4. Base and cap flashing shall be installed in accordance to the manufacturer’s instructions.
5. Complete tear-off of old roof is required if existing roof is water soaked or shingles are curled or if existing roof covering is slate, wood shake, clay,
cement tiles.
6. Maximum of two layers of roofing materials can be installed, provided first layer is not damaged or water soaked and with manufacturer approval.
7. All damaged, water soaked or deteriorated sheathing shall be replaced.
8. Call 24-hours in advance after tear-off for final inspection.
9. See Sections 806 and 907 of the Residential Code of Ohio for other requirements.
1. PROJECT INFORMATION:
Street Address:__________________________________________
City / State / Zip:_________________________________________
Project Description_______________________________________
Cost of Project $_________________________________________
Name_________________________________________________
Address_______________________________________________
City/State/Zip___________________________________________
Phone______________________Cell_______________________
APPLICANT/PERSON PRIMARILY RESPONSIBLE:
Company Name_________________________________________
Contact Person__________________________________________
Address________________________________________________
City / State / Zip_________________________________________
Phone______________________ Mobile_____________________
E-Mail_________________________________________________
I hereby certify that I am the Owner of Record or that the proposed
work is authorized by the Owner of Record, that I have been
authorized by the Owner to make this application as his Agent, and
that we agree to conform to ALL laws of the County and the State,
and that all information on this application is truthful to the best of my
knowledge. I also understand that UPFRONT FEES ARE NON-
REFUNDABLE AND NON-TRANSFERABLE.
Applicant Signature: ______________________________
Date: _______________________________________
________________________________
ANSWER ALL QUESTIONS BELOW:
1. Will this be a complete tear-off? Yes
No
2. Does the roof have 2 or more layers? Yes
No
if yes, tear-off is required.
3. Is the existing roof water soaked? Yes
No
if yes, tear-off is required.
4. What type of roofing material will be used?
Asphalt
Wood Shakes
Slate
Other
5. Are ridge vents or box vents being used? Yes
No
6. Are eave vents or soffit vents being used? Yes
No
7. Fire classification of new roof? ______________
TO DETERMINE ROOF VENTILATION REQUIREMENTS PERFORM THE
FOLLOWING CALCULATIONS:
If roof and soffit vents are being used, use the following calculation
:
Square footage of the roof area_________divide by 300=__________Square
foot of ventilation required.
If roof and soffit vents are NOT being used, use the following calculation
:
Square footage of the roof area________ divide by 150 =__________Square
foot of ventilation required.
Office Use Only
Intake Person______________________________________
Upfront fee paid $___________________________
Plan Review Approved by_______________Date_____________
Plan Review Comments_________________________________
Balance Due $_____________________________
Notified Permit Ready_________________Date______________
Date Picked Up____________________
