How To Measure
Measuring Without Entering The Pool:
You will be able to measure horizontally, all of the
bottom dimensions without entering the pool.
You can use a simple measuring tool that will
take about 5 minutes to assemble & is used by
pool professionals taking liner measurements.
You Will Need:
-A Long Straight Pole (Vac Pole) - "Fishing Pole"
-String Attached To End Of Pole
-Weight To Attach To End Of String
-A Measuring Tape
Follow the instructions below, using the "Fishing Pole" to make measurements.
Horizontal Bottom Measurements:
Use your "Fishing Pole" to "Fish" for a point on the bottom of the pool.
With the pole to the ends of the pool and the string vertical (allow no slack in the string), measure the distance from
the edge of the pool (water's edge) to the end of the pole where the string is attached.
You should "Fish" for points that will achieve the desired measurements based on the bottom contour of the pool.
For example to take measurement "H", you would stand on one side of the pool, and "Fish" for a corner of the
hopper. You would then measure the distance from the water's edge to the end of the pole where the string is
attached.
Depth Measurements:
When taking the depth measurements, be sure to measure from the bottom of the pool floor to the bead receiver
(beaded liners only), or to the board where the liner is nailed or stapled (Overlap Liners). Do not measure to the top
of the pool if you have a beaded liner, this will be incorrect & liner will not fit as it should.
If you have any questions on how to measure please feel
free to contact us at 1-800-909-7294
You can view all of our patterns at www.PoolSplash.com
This form can be faxed or sent via email for same day quote for most pool shapes.
We guarantee the lowest price on any size and any shape Inground pool liner.
call! a us give or forms measuring more for website our
visit shapes pool other For form? this on pool of type your see Don't
