Holophane | 3825 Columbus Rd., Granville, OH 43023 | Phone: 866-HOLOPHANE | www.holophane.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/28/18 Specifications are subject to change without notice.
WFCL2
Page 1 of 5
WFCL2
Utility Washington Series Luminaire
Full Cutoff LED2
Catalog Number
Notes Type
Mechanical
• Heavy grade A360 cast aluminum (<1% copper)
• Tool-less access with a spring-loaded latch
• Hidden hinge door allowing the door to swing open and
remain open
• Optional internal or external NEMA twist lock photocontrol
receptacle. Housing contains a tempered glass window to
allow light to reach the cell for internal versions.
• Mount to slip-fitter that will accept 3” high by 2-7/8” to
• 3-1/8” O.D. pole tenon
• Decorative top cover contains stainless steel hinge which
secures entry the LED optical chamber
• Polyester power coat paint to ensure maximum durability
• Finish meets 5,000-hour salt spray testing
• Holophane and RAL Classic finishes.
Electrical
• All surge protection meets ANSI/IEEE C62.41.2 10kV/10kA.
• Standard SPD meets 10kV/5kA per ANSI C136.2-2015.
• 20KV Option meets 20kV/10kA per ANSI C136.2-2015.
• Quick disconnect connectors for ease of installation
and maintenance.
• Three pole terminal block is standard, with optional
prewired leads for ease of installation
• LLED drivers meet maximum total harmonic distortion
(THD) of 20%, >0.90 Power Factor and are ROHS compliant.
Minimum operating temperature is -40C. Electronic driver
has an estimated minimum life of 100,000 hours at 25°C.
Optical
• IP65 rated optical compartment
• LED circuit board located in the top cover
• Asymmetric or Symmetric full cutoff distributions
• 2700K, 3000K, 4000K, and 5000K CCT
• 70CRI Standard
Control Options
• Field Adjustable Output (AO) module - Onboard device that
adjusts the light output and input wattage to meet site
specific requirements. The AO module is preset at the factory
to position number 8 (see chart).
• Wireless remote control for monitoring performance and/or
maintenance of the system – ROAM
• Factory Programmed Driver (FPDxx) - Customize lumen
output prior to manufacturing and still enables control leads
so other options can also be used
• Long Life Photocontrols (PCLL) - 20 Year Life
• 3 and 7 pin photocontrol receptacles internally (P3, P7) or
externally (P3E, P7E) mounted
• Part-night dimming (PND) enables luminaire to monitor
and adjust 50% lumens based on season and geographic
location, 8-day rolling average
Testing/Compliance
• UL 1598 - Wet Locations Safety Listing
• Suitable for ambient temperatures -40°C to 40°C
• DesignLights Consortium® (DLC) qualified product. Not all
versions of this product may be DLC qualified. Please check
with the DLC Qualified Products List at www.designlights.
org/QPL for updated list
Manufacturing
• Manufactured in Crawfordsville, Indiana, ARRA compliant
• 100% electrical testing on all luminaires before shipment
• Ten (10) years minimum experience in manufacturing
LED based products
Warranty
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_
Conditions.aspx.
Note: Actual performance may differ as a result of end-user
environment and application.
All values are design or typical values, measured under
laboratory conditions at 25°C.
Specifications subject to change without notice.
3'-6"
Ø1'-7"
LUMINAIRE
HOUSING
OPTICAL
ASSEMBLY
CAST ALUMINUM
FINIAL
SLIPFITTER FOR
NOMINAL 3" DIA.
TENON
SET SCREWS
PHOTOCELL
WINDOW
OPENING
LATCH
HINGED DOOR HOUSING
ELECTRONIC MODULE
WITH TWISTLOCK
RECEPTACLE
(OPTIONAL)
DIMENSIONAL DATA
Maximum Weight - 57 lbs
Maximum Effective Projected Area - 1.72 sq. ft.
WFCL2 P30 30K AS BK L3 S FPD80