Holophane | 3825 Columbus Rd., Granville, OH 43023 | Phone: 866-HOLOPHANE | www.holophane.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/29/18 Specifications are subject to change without notice.
AUCL2
Page 1 of 5
AUCL2
Utility Arlington Series Luminaire Full Cutoff LED2
Catalog Number
Notes Type
Mechanical
• Heavy grade A360 cast aluminum (<1% copper)
• Tool-less access with a spring-loaded latch
• Hidden hinge door allowing the door to swing open and
remain open
• Optional internal or external NEMA twist lock photocontrol
receptacle. Housing contains a tempered glass window to
allow light to reach the cell for internal versions.
• Mount to slip-fitter that will accept 3” high by 2-7/8” to
• 3-1/8” O.D. pole tenon
• Decorative top cover contains stainless steel hinge which
secures entry the LED optical chamber
• Polyester power coat paint to ensure maximum durability
• Finish meets 5,000-hour salt spray testing
• Holophane and RAL Classic finishes.
Electrical
• All surge protection meets ANSI/IEEE C62.41.2 10kV/10kA.
• Standard SPD meets 10kV/5kA per ANSI C136.2-2015.
• 20KV Option meets 20kV/10kA per ANSI C136.2-2015.
• Quick disconnect connectors for ease of installation
and maintenance.
• Three pole terminal block is standard, with optional
prewired leads for ease of installation
• LED drivers meet maximum total harmonic distortion (THD)
of 20%, >0.90 Power Factor and are ROHS compliant.
Minimum operating temperature is -40C. Electronic driver
has an estimated minimum life of 100,000 hours at 25°C.
Optical
• IP65 rated optical compartment
• LED circuit board located in the top cover
• Asymmetric or Symmetric full cutoff distributions
• 2700K, 3000K, 4000K, and 5000K CCT
• 70CRI Standard
Control Options
• Field Adjustable Output (AO) module - Onboard device that
adjusts the light output and input wattage to meet site
specific requirements. The AO module is preset at the factory
to position number 8 (see chart).
• Wireless remote control for monitoring performance and/or
maintenance of the system – ROAM
• Factory Programmed Driver (FPDxx) - Customize lumen
output prior to manufacturing and still enables control leads
so other options can also be used
• Long Life Photocontrols (PCLL) - 20 Year Life
• 3 and 7 pin photocontrol receptacles internally (P3, P7) or
externally (P3E, P7E) mounted
• Part-night dimming (PND) enables luminaire to monitor
and adjust 50% lumens based on season and geographic
location, 8-day rolling average
Testing/Compliance
• UL 1598 - Wet Locations Safety Listing
• Suitable for ambient temperatures -40°C to 40°C
• DesignLights Consortium® (DLC) qualified product. Not all
versions of this product may be DLC qualified. Please check
with the DLC Qualified Products List at www.designlights.
org/QPL for updated list
Manufacturing
• Manufactured in Crawfordsville, Indiana, ARRA compliant
• 100% electrical testing on all luminaires before shipment
• Ten (10) years minimum experience in manufacturing
LED based products
Warranty
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_
Conditions.aspx.
Note: Actual performance may differ as a result of end-user
environment and application.
All values are design or typical values, measured under
laboratory conditions at 25°C
Specifications subject to change without notice.
2'- 8 1/2"
Ø1'- 4 3/8"
LUMINAIRE
HOUSING
OPTICAL
ASSEMBLY
CAST ALUMINUM
FINIAL
COVER
LATCH
NOMINAL 3" DIA.
PHOTOCELL
WINDOW
OPENING
HINGED DOOR HOUSING
ELECTRONIC MODULE
WITH TWISTLOCK
RECEPTACLE
(OPTIONAL)
DIMENSIONAL DATA
Maximum Weight - 40 lbs
Maximum Effective Projected Area - 1.38 sq. ft.
AUCL2 P30 30K AS BK L3 S FPD80