Fillable TOWN of MILTON, VT | DEVELOPMENT REVIEW APPLICATION (Town of Milton, Vermont)

Fill Online, Printable, Fillable, Blank TOWN of MILTON, VT | DEVELOPMENT REVIEW APPLICATION (Town of Milton, Vermont) Form

Use Fill to complete blank online TOWN OF MILTON, VERMONT (VT) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

TOWN of MILTON, VT | DEVELOPMENT REVIEW APPLICATION (Town of Milton, Vermont)

On average this form takes 4 minutes to complete

The TOWN of MILTON, VT | DEVELOPMENT REVIEW APPLICATION (Town of Milton, Vermont) form is 2 pages long and contains:

  • 0 signatures
  • 38 check-boxes
  • 0 other fields

Country of origin: US
File type: PDF

U.S.A. forms for Town of Milton, Vermont

BROWSE TOWN OF MILTON, VERMONT (VT) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
TOWN of MILTON, VT | DEVELOPMENT REVIEW APPLICATION
If you have any questions, call (802)893-1186 or visit us in the Milton Municipal Complex at 43 Bombardier Road, Milton, VT 05468
Town of Milton, VT | Development Review Application | Last Revised October 10, 2017
Page 1 of 2
SUBDIVISION PRELIMINARY PLAN FORM, UDR 340 & 440
Preliminary Plan Checklist
Check here to verify that the proposal conforms to the layout shown on the sketch plan plus any recommendations
made by the DRB in its decision.
Check each box below to verify that your preliminary plat drawing includes the following:
The Preliminary Subdivision Plat shall consist of one or more maps or drawings which may be printed or reproduced
on paper with all dimensions shown in feet or decimals of a foot, drawn to scale of not more than one hundred (100)
feet per inch, showing or accompanied by the following information:
Proposed subdivision name or identifying title and the name of the Town.
Name and address of record owner, subdivider and designer of Preliminary Plat.
Number of acres within the proposed subdivision, location of property lines, existing easements, building envelopes,
building locations, natural resources and other essential existing physical features.
The names of all subdivisions immediately adjacent and the names of owners of record of adjacent acreage.
The zoning district designation of the area to be subdivided and any zoning district boundaries affecting the tract.
Deed reference, tax map reference.
The location and size of any existing sewers and water mains, culverts and drains on the property.
Location, names and present widths of existing and proposed streets, highways, easements, building lines, alleys,
parks, and other public open spaces as well as similar facts regarding adjacent property two hundred (200) feet from
property lines.
Contour lines at intervals of five (5) feet for existing grades and for proposed finished grades where change of existing
ground elevation will be five (5) feet or more.
Typical cross sections of the proposed grading and roadways and of sidewalks (see public works specifications).
Complete survey of subdivision tract by a licensed land surveyor.
Date, true north point and scale.
Means of providing water supply to the proposed subdivision.
Means of providing sewage disposal to the proposed subdivision.
Provisions for collecting and discharging storm drainage, in the form of drainage plan.
Preliminary designs of any bridges or culverts which may be required.
The proposed lot lines with approximate dimensions and suggested locations of buildings.
The location of temporary markers adequate to enable the DRB to locate readily and appraise the basic layout in the
field. Unless an existing street intersection shall be shown.
All parcels of land proposed to be dedicated to public use and the conditions of such dedication.
The location of natural features or site elements to be preserved.
The Preliminary Plat shall be accompanied by a vicinity map drawn at the scale of not over four hundred (400) feet to
the inch to show the relation of the proposed subdivision to the adjacent properties and to the general surrounding
area. The vicinity map shall show all the area within two thousand (2,000) feet of any property line of the proposed
subdivision or any smaller area between the tract and all surrounding existing streets, provided any part of such a
street used as part of the perimeter for the vicinity map is at least five hundred (500) feet from any boundary of the
proposed subdivision. Within such area the vicinity map shall show:
All existing subdivisions and approximate tract lines of parcels together with the names of the record owners of all
adjacent parcels of land, namely, those directly abutting or directly across any right-of-way adjoining the proposed
subdivision.
Locations, widths and names of existing, filed or proposed streets, easements, building lines and alleys pertaining to the
proposed subdivision and to the adjacent properties as designated in Paragraph one (1), above.
An outline of the platted area together with its street system and an indication of the future probable street system of
the remaining portion of the tract, if the Preliminary Plat submitted covers only part of the subdivider's entire holding.

Town of Milton, VT | Development Review Application | Last Revised October 10, 2017
Page 2 of 2
Standards of Evaluation (UDR Chapter 340)
Check each box below to verify that you have read, understood, and accept the following standards of evaluation.
The proposed development will not cause a disproportionate or unreasonable burden on the town’s ability to provide
community facilities and utilities
The land to be subdivided is suitable for use without endangering public health or safety, and adversely impacting the
environment, neighboring properties or the character of the area.
The applicant must design the subdivision to follow and extend the planned settlement pattern (including lot size, lot
configuration, road layout and structure location) and to connect to and extend existing road, sidewalk, path, trail,
utility, greenway, and open space corridors.
Applicants must construct new or extended roads in accordance with the Town of Milton’s Public Works Specification.
The proposed development is in compliance with the Milton Comprehensive Plan, Zoning Regulations and other By-
Laws then in effect.
The applicant must demonstrate that the proposed subdivision will be compatible with and enhance the character of
the area; not contribute to a pattern of strip development, and not impair or impede the lawful development of
property within the area for the uses permitted in the applicable zoning district.
The applicant must demonstrate that the proposed subdivision has been designed to facilitate use of energy-efficient
modes of transportation such as walking, biking and transit as feasible and appropriate given the location and use.
The applicant must demonstrate that proposed subdivision will be designed and located to avoid, minimize and/or
mitigate adverse impacts to significant natural resources.
The applicant must comply with soil preservation standards.
Check here if you have opted to ATTACH a narrative explaining how the proposal addresses the standards above, as well
as the standards specifics in Chapter 340 of the UDR.
Conditions of Approval
Check here to verify your understanding and acceptance that the DRB shall study the sketch plan to determine whether or
not it conforms to, or would be in conflict with the Plan, the Zoning Regulations and any other By-laws in effect, and shall
where it deems necessary, make specific recommendations for changes in subsequent submissions. The DRB may also require
where necessary for the protection of the public health, safety, and welfare that a minor subdivision comply with all or some of
the requirements specified in these regulations for major subdivisions.
Final Application
Check here to verify your understanding that within six (6) months of preliminary plat approval, the subdivider shall submit
an application for approval of a final subdivision plat. The application shall contain those items set forth in Chapters 340 and
440 of the UDR, and shall conform to the layout shown on the approved preliminary plat and incorporate all conditions set forth
in the preliminary plat approval.
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

TOWN of MILTON, VT DEVELOPMENT REVIEW APPLICATION (Town of Milton, Vermont)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 January 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document