Fillable TOWN OF OCCOQUAN ARCHITECTURAL REVIEW BOARD MEETING (Town of Occoquan Virginia)

Fill Online, Printable, Fillable, Blank TOWN OF OCCOQUAN ARCHITECTURAL REVIEW BOARD MEETING (Town of Occoquan Virginia) Form

Use Fill to complete blank online TOWN OF OCCOQUAN VIRGINIA (VA) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

TOWN OF OCCOQUAN ARCHITECTURAL REVIEW BOARD MEETING (Town of Occoquan Virginia)

On average this form takes 11 minutes to complete

The TOWN OF OCCOQUAN ARCHITECTURAL REVIEW BOARD MEETING (Town of Occoquan Virginia) form is 25 pages long and contains:

  • 0 signatures
  • 1 check-box
  • 42 other fields

Country of origin: US
File type: PDF

U.S.A. forms for Town of Occoquan Virginia

BROWSE TOWN OF OCCOQUAN VIRGINIA (VA) FORMS
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Portions of this meeting may be held in closed session pursuant to the Virginia Freedom of Information Act.
TOWN OF OCCOQUAN
Town Hall, 314 Mill Street, Occoquan, VA 22125
www.occoquanva.gov | info@occoquanva.gov | (703) 491-1918
ARCHITECTURAL REVIEW BOARD MEETING
Town Hall – 314 Mill Street
Tuesday, December 15, 2020
7:30 p.m.
1. Call to Order
2. Citizen Comments
3. Approval of Minutes
a. September 22, 2020 Minutes
4. Exterior Elevation Applications
a. ARB2020-008: 413 Mill Street (Visitors Kiosk)
5. Town Council Report
6. Planning Commission Report
7. Chair Report
8. Adjournment
Brenda Seefeldt
Chair, Architectural Review Board
Architectural ReviewBoard
Meeting Minutes September 22, 2020
The meeting was called to order at 7:32 pm by the Chair, Brenda Seefeldt.
Attendees: Brenda Seefeldt, Carol Bailey, Darryl Hawkins, Johnathan Torres and Doug Kastens on Zoom.
Lori Domenech was excused absent.
There were no citizen comments.
The minutes for August 25, 2020, were moved to be accepted by Carol Bailey and seconded by Darryl
Hawkins. All ayes.
ARB 2020 15-33 Exterior Elevation – Application was submitted for 302 Poplar Alley. They are asking for
siding, CertainTeed Midnight Blue, Monogram, Double 5’ Dutchlap. The application was accepted as is,
motion made by Brenda Seefeldt, seconded by Doug Kastens. All ayes.
Planning Commission report:
The changes to the sign ordinance have been approved.
Chair report:
We welcome back our prior Town Manager, Kirstyn Jovanovich.
Brenda talked about the public meeting the following night reminding everyone that they are
free to ask questions and comment but cannot use their position on the ARB to reinforce any questions
or comments.
The meeting was adjourned by the chairman at 7:43 pm.
Minutes submitted by Carol Bailey.
TOWN OF OCCOQUAN
ARCHITECTURAL REVIEW BOARD
APPLICATION FOR EXTERIOR ELEVATIONS
Commercial and Residential
This application must be filed at Town Hall by noon on the Wednesday prior to the
Architectural Review Board meeting, which is regularly scheduled on the fourth Tuesday of
each month at 7:30 p.m. in Town Hall. The Board requires that actual paint color samples and
product brochures (and a photograph of the structure if there is to be a change to the structure’s
exterior) accompany this form. Applicants are encouraged to refer to the Guidelines
(Residential and Commercial) which are available for review at Town Hall and online at
www.occoquanva.gov. The applicant or a representative must be present at the meeting,
during which the ARB will review the application.
Name: ______________________________________________________________________________
Mailing Address:_____________________________________________________________________
Phone: (______)_______________________ Date Submitted: ______________________________
Project Address: ______________________________________________________________________
Work is scheduled to begin (date): _____________________________________________________
Roof and Roofing
Pitch: __________________ Material: __________________ Color: ________________
Dormers
Pitch: __________________ Material: __________________ Color: ________________
Windows
Dimensions: _________________________ Window Placement: ______________________
Grid Pattern/Color: ____________________ Grid Profile: ___________________________
Shutter Color: ________________________ Trim Paint Color: ________________________
ARB2020-008
Prince William County Office of Tourism
14420 Bristow Road, Manassas VA
703
792-4270
2/20/20
12/9/20
NA
NA
NA
NA
NA
ARB Application for Exterior Elevations Page 2
Material(s)
Brick, stucco, siding, etc.: _______________________________________________________
Color(s): ______________________________Pattern: ________________________________
Mortar Color: ________________________ Joint Pattern: ___________________________
Doorway(s)
Design/Pattern: _____________________________________________________________________
Column Size: ______________________________Porch Post(s) Size: ________________________
Spindle Design: ______________________ Color(s): ______________________________________
Light Fixtures (color/style/placement): _________________________________________________
Fences, walls, decks
Material(s) (wood, brick, stucco, etc.): __________________________________________________
Color(s): ____________________________________________________________________________
Pattern: _____________________________________________________________________________
Decorative Trim and/or Hardware: ___________________________________________________
Mortar Color: ___________________________ Joint Pattern: _______________________________
For new construction or alteration of structure, attach nine copies of scale drawings of the
proposal. For new construction, attach a schematic showing building in relation to neighboring
buildings.
Landscape Design Plan Attached? Yes No
_________________________________
Chair, Architectural Review Board
____________________________________
Applicant’s Signature
Date Submitted: _______________
Date Approved: ______________
TOWN USE ONLY
Check No.: ________ Cash Receipt No.: __________
Application Fee: $10
12/9/20
Application Received 12/10/2020
Application Fee Due As of 12/11/20
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
brushed aluminum posts for the kiosk
black powder coated for kiosk frame
the kiosk will be designed to compliment the street lighting
NA
Visitor Center Kiosk Narrative – Town of Occoquan
The kiosk is planned for the west side of the sidewalk adjacent to the Mill House Museum (please see
attached location exhibit). Site work will include a 6’x6’ sidewalk addition. The addition will match the
existing high concrete curb and the brick paver overlay. This will increase the sidewalk area around the
west side of the museum to 12’x12’. The kiosk will be placed in the center of the expanded sidewalk,
allowing for at least 5’ of clearance on either side of the kiosk.
The kiosk will be fabricated of black, powder coated aluminum. It will be designed to closely match the
existing light poles along Mill Street. The rough dimensions are 7’ high with a 2 ½” clearance below the
insert. The informational panel will be roughly 4.5’ x 4.5’. Once the project is approved, the County will
contract with the sign fabricator and provide a final design to the town before ordering the kiosk.
The informational panel will be DURA BOND aluminum material (please see specification sheet). One
panel will include visitor information for the Town of Occoquan with one panel featuring County tourism
information. Both panels will have weather resistant brochure racks for tourism and programming
information. A draft is included in the packet. Final layout to be negotiated with the Town staff.
LAYOUT
TOWN OF OCCOQUAN
VISITOR INFORMATION KIOSK
Kiosk Design
Decorative
Augusta Pole
Base
Kiosk Layout
Public Restrooms
Visitor Information
VisitPWC.com
Occoquan Brochure /
Map
Future Great Outdoors /
Bandwango Pass
FONTS
Open Sans ‘Bold’
3-Dimensional Letters
County ‘Icons’
3 Dimensional
Color TBD
Prince William County
Brochure / Map
Virginia Travel Guide
QR Code
Linked To Town of
Occoquan / Prince
William County Tourism
Page
(4) Brochure Racks
Will be weather proof
and able to be easily
replaced if vandalized
24”w x 17”h County Map
Map will be able to be
updated frequently or as
needed
SIDE A – COUNTY - KIOSK LAYOUT (Facing Downtown / Town Hall)
Visitor Information
More Shops & Restaurants
SIDE B – TOWN – KIOSK LAYOUT (Facing Restrooms/ River Mill Park)
VisitPWC.com
Occoquan Brochure /
Map
Tourism Promotion
Space
Prince William County
Brochure / Map
Virginia Travel Guide
FONTS
Open Sans ‘Bold’
3-Dimensional Letters
County ‘Icons’
3 Dimensional
Color TBD
QR Code
Linked To Town of
Occoquan / Prince
William County Tourism
Page
(4) Brochure Racks
Will be weather proof
and able to be easily
replaced if vandalized
24”w x 17”h Town Map
& Directory
Map will be able to be
updated frequently or as
needed
SPECIFICATIONS
28
60.25
3
55
30
1
1
1
PROJECT
TITLE
DATE SHEET
DWG NO REVUNITSSIZE
1/510/14/2020
B INCHES
DUROWELD
Kiosk
3
3.5
4.5
2.5
.25
NOTES:
-All material 6061 alum
-All welded joints ground
flush and smooth
-Kiosk bolted to posts with
BHCS
-Posts and entire kiosk
painted gloss black,
except perimeter frame is
painted bronzetone
26.5
84
Ø.375
Ø.375
PROJECT
TITLE
DATE SHEET
DWG NO REVUNITSSIZE
2/510/14/2020
B INCHES
DUROWELD
Kiosk
INNER FRAME
55
26
1
1
OUTER FRAME
59
28
3
1
1
2.5
3
3
9
1.5
SECTION VIEW
1
8
" Panel
2.5
1
1
1
PROJECT
TITLE
DATE SHEET
DWG NO REVUNITSSIZE
3/510/14/2020
B INCHES
DUROWELD
Kiosk
26
55
8.5
45°
9
45°
8.5
1.5
Notes:
Material:
1
8
" Aluminum
Qty: 2 per
Top Assembly
Kiosk Panel
1
29
30
.25
29
3.5
1
1
30
4.5
Top Cap
Top Cap Frame
PROJECT
TITLE
DATE SHEET
DWG NO REVUNITSSIZE
4/510/14/2020
B INCHES
DUROWELD
Kiosk
Ø5
Ø5.5
4
2.5 2.5
NOTES:
Material: Aluminum
Qty: 4 per
3
5
9
Pole Mounts
Oval Seal
2.8
.25
PROJECT
TITLE
DATE SHEET
DWG NO REVUNITSSIZE
5/510/14/2020
B INCHES
DUROWELD
Graphic Layout
A
B
C
D
E
G
F
F
F
H
I
NOTES:
-1/2" spacing
between graphics
-3/8" spacing
between F,F,F and G
-Same dimesnions
for both panels with
different text/graphic
KEY:
A-Oval Seal- 4.6"H x4"W
B-Raised Letters- 8"H x 24"W
C-"i"- 3" Diameter
D-Tourist Info- 3"H x 24"W
E-Map- 17"H x 24"W
F-Brochure Holder- 14"H x 5"W
G-Mag Holder- 14"H x 9.25"W
H-Website- 2"H x 24"W
I-QR Code- 3"H x 3"W
1
1
.3125
10/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
4200 AUGUSTA SERIES
ORNAMENTAL POLE
JOB NAME
FIXTURE TYPE
MEMO
Base Model
• 42
Height (in feet)
• 8 • 9 • 10 • 12 • 14 • 16 • 18
Shaft
• T4: 4”- 3” Tapered Smooth
• T5: 5”- 3” Tapered Smooth
• T54: 5”- 4” Tapered Smooth
• P4: 4” Straight Smooth
• P5: 5” Straight Smooth
• FP4
1
: 4” Straight Fluted
• FP5
2
: 5” Straight Fluted
• TFP5
3
: 5” - 3” Cast Tapered Fluted
1
Not available in .250 wall
2
Not available in .125 wall
3
Heights limited to 9’0”, 10’1”, 12’2”, 14’2”
Wall Thickness
• .125: 1/8” Wall Thickness
• .188: 3/16” Wall Thickness
• .250: 1/4” Wall Thickness
• C
4
: Cast Shaft, Varied Wall Thickness
4
For cast “TFP” shafts only
Post Center Cap (if required)
(Click here to view post cap sheet)
• BCC • FCC • SCC • TFCC
• SSCC • RCC • PCC
Options (Click here to view accessories sheet)
• DB4 Direct Burial mounting style pole, with
4’ direct burial section (or advise other
length)
• HXB Helix Base mounting style pole
• PCD Electronic Button Photocontrol,
mounted on an access door (120v-277v)
• PCD4 Electronic Button Photocontrol,
mounted on an access door (480v)
• GFI IUC 15 Amp duplex GFCI receptacles with
a standard in-use cover
• GFI LPIUC 15 Amp duplex GFCI receptacles
with a low-prole in-use cover
• GFI IB 15 Amp duplex GFCI receptacle
installed in pole base, includes mouse
hole on access door for wire access
• GFB Remote Ground Fault Breaker installed
in pole base (for use with NON-GFCI
receptacles)
• FH Cast Aluminum ag holder mount, for
use with 1” diameter ag pole
• SBA Single Banner Arm, “PM” style mount
• DBA Double Banner Arms, “PM” style mount
• SBAR Single Banner Arm and Ring, for
triangle banners, “PM” style mount
• HSBA Single Banner Arm, HUB mount style
mount
• HDBA Double Banner Arms, HUB mount
style mount
• BDBA6 Double Banner Arms, Break-Away
style, to break with 60MPH wind
gust
• BDBA9 Double Banner Arms, Break-Away
style, to break with 90MPH wind
gust
• C4SBA Single Banner Arm, Clamp-Style
mount, for 4” diameter poles
• C5SBA Single Banner Arm, Clamp-Style
mount, for 5” diameter poles
• C4DBA Double Banner Arms at 180°, Clamp-
Style mount, for 4” diameter poles
• C5DBA Double Banner Arms at 180°, Clamp-
Style mount, for 5” diameter poles
• DHPA Double Hooked Planter Arm
• SHPA Single Hooked Planter Arm
• DSPA Double Stepped Planter Arm
• SSPA Single Stepped Planter Arm
• PA478 Cast aluminum decorative planter
arm
• SA78 Small cast aluminum decorative sign
arm, with 24” long channel for blade
sign by others
• SA478 Large cast aluminum decorative sign
arm, with 24” long channel for blade
sign by others
• SABA Banner arm style sign arm, with 24”
long channel for blade sign by others
• SH Female threaded speaker hub, advise
thread size
• SB Sign Bracket, vertically mounted on pole
shaft
• WHK Steel wreath hook
Finish (Click here to view paint nish sheet)
Standard Finishes
5
• BKT Black Textured
• WHT White Textured
• PGT Park Green Textured
• ABZT Architectural Medium Bronze Textured
• DBT Dark Bronze Textured
5
Smooth nishes are available upon request.
Custom Finishes
6
• CM Custom Match
• OI Old Iron
• RT Rust
• WBR Weathered Brown
• CD Cedar
• WBK Weathered Black
• TT Two Tone
6
Custom colors require upcharge.
Sternberg Select Finishes
• VG Verde Green
• SI Swedish Iron
• OWGT Old World Gray Textured
BUILD A PART NUMBER
ORDERING EXAMPLE: 4214FP4-.188-BCC-GFILPIUC-SH/BKT
Base
Model
Height Shaft
Wall
Thickness
Post
Center
Cap
Option
Burial
Option
Photocell
Option
Ground
Fault
Breaker
Option
Flag Pole
Holder
Option
Banner
Arms
Option
Planter
Arms
Option
Sign
Arms
Option
Speaker
Hub
Option
Sign
Bracket
Option Steel
Wreath
Hook
Finish
DIMENSIONS
16-3/4” Ø
18” TALL
5 YEAR
WARRANTY
UL
LISTED
ETL
LISTED
CLICK
FOR FAQ’s
STERNBERG
STERNBERG STERNBERG STERNBERG STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
STERNBERG
STERNBERG STERNBERG STERNBERG STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
10/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
4200 AUGUSTA SERIES
ORNAMENTAL POLE
The tapered smooth shaft shall be made of
ASTM 6063 extruded aluminum and tempered
to a T6 condition
The straight uted shaft shall be made of
ASTM 6061 extruded aluminum and tempered
to a T6 condition
The tapered uted shaft shall be made of
heavy wall 356 alloy cast aluminum
Installation
Four 1/2” diameter, hot-dipped galvanized “L”
type anchor bolts shall be provided with the
post for anchorage, they shall be mounted in a
12” bolt circle. A door shall be provided for
wiring and anchor bolt access. It shall be se-
cured with stainless steel hardware. Post will be
provided with a grounding stud mounted on the
base oor opposite the access door.
Warranty
Five-year limited warranty. See product and
nish warranty guide for details.
Finish
Refer to website for details.
Specications
Construction
The one piece base is made of heavy wall 356
alloy cast aluminum with a 3/4” thick oor cas-
tas an integral part of the base. The high tensile
aluminum shaft shall be double circumferen-
tially welded internally and externally to the
base for added strength.
Shaft
The straight smooth shaft shall be made of
ASTM 6063 extruded aluminum and tempered
to a T6 condition
18”
12-3/4”
16-3/4 ”
ACCESS DOOR
TAPERED
FLUTED
SHAFT
STRAIGHT
FLUTED
SHAFT
TAPERED
SMOOTH
SHAFT
STRAIGHT
SMOOTH
SHAFT
STERNBERG
STERNBERG STERNBERG STERNBERG
STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
STERNBERG
STERNBERG STERNBERG
STERNBERG
STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
STERNBERG
STERNBERG
STERNBERG
STERNBERG STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
STERNBERG
STERNBERG
STERNBERG STERNBERG STERNBERG
STRAIGHT
FLUTED
SHAFT
STRAIGHT
SMOOTH
SHAFT
TAPERED
SMOOTH
SHAFT
TAPERED
FLUTED
SHAFT
18"
16 3/4"
12 3/4"
ACCESS DOOR
Ă12" Bolt Circle
12” BOLT CIRCLE
10/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
4200 AUGUSTA SERIES
ORNAMENTAL POLE
POLE HEIGHT 90 MPH 100 MPH 110 MPH 120 MPH 130 MPH 140 MPH 150 MPH
T4 4”-3” Smooth Tapered Shaft - 0.125” Wall Thickness
8
13.87 11.07 8.99 7.41 6.22 5.32 4.60
10
10.12 7.97 6.39 5.18 4.29 3.64 3.13
12
7.64 5.92 4.64 3.67 2.97 2.50 2.12
14
5.84 4.41 3.35 2.54 1.98 1.63 1.36
T4 4”-3” Smooth Tapered Shaft - 0.188” Wall Thickness
10
10.20 8.04 6.44 5.22 4.32 3.68 3.16
12
7.73 5.99 4.70 3.72 3.01 2.54 2.15
14
5.95 4.49 3.42 2.60 2.03 1.67 1.39
16
4.56 3.32 2.40 1.70 1.24 0.98 0.78
T4 4”-3” Smooth Tapered Shaft - 0.25” Wall Thickness
12
7.78 6.02 4.73 3.74 3.03 2.55 2.17
14
6.00 4.53 3.45 2.63 2.05 1.69 1.41
16
4.62 3.36 2.44 1.73 1.26 1.00 0.80
18
3.42 2.34 1.54 0.94 0.56 0.38
T5 5”-3” Smooth Tapered Shaft - 0.125” Wall Thickness
8
18.96 15.17 12.47 10.43 8.85 7.60 6.59
10
14.01 11.11 9.10 7.58 6.41 5.49 4.74
12
10.79 8.44 6.87 5.70 4.80 4.08 3.51
14
8.47 6.51 5.25 4.33 3.61 3.05 2.61
T5 5”-3” Smooth Tapered Shaft - 0.188” Wall Thickness
10
14.08 11.16 9.14 7.62 6.44 5.51 4.77
12
10.86 8.50 6.92 5.74 4.83 4.11 3.54
14
8.55 6.57 5.31 4.37 3.65 3.09 2.64
16
6.78 5.09 4.06 3.31 2.74 2.29 1.93
T5 5”-3” Smooth Tapered Shaft - 0.25” Wall Thickness
12
10.89 8.53 6.94 5.76 4.85 4.13 3.55
14
8.59 6.61 5.34 4.40 3.67 3.11 2.65
16
6.83 5.12 4.09 3.34 2.76 2.31 1.95
18
5.30 3.83 3.00 2.41 1.96 1.61 1.33
T54 5”-4” Smooth Tapered Shaft - 0.125” Wall Thickness
8
18.81 15.01 12.33 10.31 8.73 7.49 6.49
10
13.82 10.90 8.91 7.42 6.26 5.35 4.62
12
10.54 8.19 6.64 5.49 4.61 3.91 3.35
14
8.18 6.20 4.98 4.08 3.39 2.85 2.42
T54 5”-4” Smooth Tapered Shaft - 0.188” Wall Thickness
10
13.86 10.94 8.94 7.44 6.28 5.37 4.63
12
10.60 8.23 6.68 5.52 4.63 3.93 3.37
14
8.24 6.25 5.02 4.11 3.42 2.88 2.44
16
6.42 4.71 3.73 3.01 2.46 2.04 1.71
T54 5”-4” Smooth Tapered Shaft - 0.25” Wall Thickness
12
10.64 8.27 6.71 5.55 4.65 3.95 3.39
14
8.29 6.30 5.06 4.14 3.44 2.90 2.46
16
6.48 4.76 3.77 3.04 2.49 2.06 1.73
18
4.90 3.42 2.63 2.07 1.65 1.33 1.08
FP4 4” Straight Fluted Pole - 0.125” Wall Thickness
8
13.73 10.92 8.83 7.25 6.06 5.17 4.47
10
9.93 7.77 6.18 4.96 4.08 3.45 2.95
12
7.41 5.67 4.38 3.40 2.71 2.26 1.90
14
5.56 4.11 3.04 2.22 1.67 1.35 1.10
FP4 4” Straight Fluted Pole - 0.188” Wall Thickness
10
9.99 7.82 6.22 5.00 4.10 3.48 2.98
12
7.48 5.72 4.43 3.44 2.74 2.29 1.93
14
5.64 4.17 3.09 2.27 1.71 1.38 1.13
16
4.20 2.95 2.02 1.32 0.86 0.64 0.47
EPA Chart - AASHTO 2009
*
Consult factory for other heights.
**
All EPA values expressed in square feet.
10/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
4200 AUGUSTA SERIES
ORNAMENTAL POLE
POLE HEIGHT 90 MPH 100 MPH 110 MPH 120 MPH 130 MPH 140 MPH 150 MPH
FP5 5” Straight Fluted Pole - 0.188” Wall Thickness
10 13.64 10.71 8.73 7.26 6.11 5.21 4.49
12 10.32 7.94 6.42 5.29 4.42 3.74 3.20
14 7.90 5.91 4.72 3.84 3.17 2.65 2.24
16 6.03 4.32 3.37 2.69 2.18 1.78 1.47
FP5 5” Straight Fluted Pole - 0.25” Wall Thickness
12 10.33 7.96 6.43 5.30 4.43 3.75 3.21
14 7.93 5.93 4.73 3.85 3.18 2.66 2.24
16 6.05 4.34 3.39 2.71 2.19 1.79 1.47
18 4.42 2.94 2.20 1.69 1.31 1.02 0.79
P4 4” Straight Smooth Shaft - 0.125” Wall Thickness
8
13.73 10.92 8.83 7.25 6.06 5.17 4.47
10
9.93 7.77 6.18 4.96 4.08 3.45 2.95
12
7.41 5.67 4.38 3.40 2.71 2.26 1.90
14
5.56 4.11 3.04 2.22 1.67 1.35 1.10
P4 4” Straight Smooth Shaft - 0.188” Wall Thickness
10
9.99 7.82 6.22 5.00 4.10 3.48 2.98
12
7.48 5.72 4.43 3.44 2.74 2.29 1.93
14
5.64 4.17 3.09 2.27 1.71 1.38 1.13
16
4.20 2.95 2.02 1.32 0.86 0.64 0.47
P4 4” Straight Smooth Shaft - 0.25” Wall Thickness
12
7.51 5.75 4.45 3.46 2.76 2.30 1.94
14
5.68 4.20 3.12 2.29 1.73 1.40 1.14
16
4.24 2.98 2.05 1.34 0.88 0.66 0.48
18
2.99 1.91 1.10 0.49
P5 5” Straight Smooth Shaft - 0.125” Wall Thickness
8
18.64 14.84 12.18 10.17 8.61 7.38 6.39
10
13.60 10.68 8.71 7.23 6.09 5.20 4.48
12
10.27 7.91 6.39 5.27 4.40 3.73 3.18
14
7.85 5.87 4.68 3.81 3.15 2.63 2.22
P5 5” Straight Smooth Shaft - 0.188” Wall Thickness
10
13.64 10.71 8.73 7.26 6.11 5.21 4.49
12
10.32 7.94 6.42 5.29 4.42 3.74 3.20
14
7.90 5.91 4.72 3.84 3.17 2.65 2.24
16
6.03 4.32 3.37 2.69 2.18 1.78 1.47
P5 5” Straight Smooth Shaft - 0.25” Wall Thickness
12
10.33 7.96 6.43 5.30 4.43 3.75 3.21
14
7.93 5.93 4.73 3.85 3.18 2.66 2.24
16
6.05 4.34 3.39 2.71 2.19 1.79 1.47
18
4.42 2.94 2.20 1.69 1.31 1.02 0.79
EPA Chart - AASHTO 2009
*
Consult factory for other heights.
**
All EPA values expressed in square feet.
LOCATION
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

TOWN OF OCCOQUAN ARCHITECTURAL REVIEW BOARD MEETING (Town of Occoquan Virginia)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 1 February 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document