9-11
Sizes
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Parker O-Ring Handbook
Parker Series 3-XXX O-Ring Sizes
These O-rings are intended for use with internal straight thread fl uid connection bosses and tube fi ttings. Ref. MS33656, MS33657,
SAE straight thread O-ring boss and mating swivel and adjustment style fi ttings.
1 2 3 45 6 7 89 10 11
3-XXX (a)
Size No.
AS568A
Dash No.
Tube O.D.
(Ref.)
O-Ring Size – Actual (b) per AS568A
(Units are in Inches)
Basic
Volume
Cu. In.
Metric O-Ring Size per AS568A (b)
(Units are in Millimeters)
3-XXX (a)
Size No.I.D.
Tolerance
± W ± I.D.
Toler-
ance
±W±
3-901 -901 3/32 .185 .005 .056 .003 .0019 4,70 0,13 1,42 0,08 3-901
3 -902 -902 1/8 .239 .005 .064 .003 .0031 6,07 0,13 1,63 0,08 3-902
3-903 -903 3/16 .301 .005 .064 .003 .0037 7,65 0,13 1,63 0,08 3-903
3-904 -904 1/4 .351 .005 .072 .003 .0055 8,92 0,13 1,83 0,08 3-904
3-905 -905 5/16 .414 .005 .072 .003 .0063 10,52 0,13 1,83 0,08 3-905
3-906 -906 3/8 .468 .005 .078 .003 .0082 11,89 0,13 1,98 0,08 3-906
3-907 -907 7/16 .530 .007 .082 .003 .0102 13,46 0,18 2,08 0,08 3-907
3-908 -908 1/2 .644 .009 .087 .003 .0137 16,36 0,23 2,21 0,08 3-908
3-909 -909 9/16 .706 .009 .097 .003 .0187 17,93 0,23 2,46 0,08 3-909
3-910 -910 5/8 .755 .009 .097 .003 .0198 19,18 0,23 2,46 0,08 3-910
3-911 -911 11/16 .863 .009 .116 .004 .0326 21,92 0,23 2,95 0,10 3-911
3-912 -912 3/4 .924 .009 .116 .004 .0346 23,47 0,23 2,95 0,10 3-912
3-913 -913 13/16 .986 .010 .116 .004 .0366 25,04 0,26 2,95 0,10 3-913
3-914 -914 7/8 1.047 .010 .116 .004 .0387 26,59 0,26 2,95 0,10 3-914
3-916 -916 1 1.171 .010 .116 .004 .0428 29,74 0,26 2,95 0,10 3-916
3-918 -918 1-1/8 1.355 .012 .116 .004 .0489 34,42 0,30 2,95 0,10 3-918
3-920 -920 1-1/4 1.475 .014 .118 .004 .0548 37,47 0,36 3,00 0,10 3-920
3-924 -924 1-1/2 1.720 .014 .118 .004 .0632 43,69 0,36 3,00 0,10 3-924
3-928 -928 1-3/4 2.090 .018 .118 .004 .0759 53,09 0,46 3,00 0,10 3-928
3-932 -932 2 2.337 .018 .118 .004 .0844 59,36 0,46 3,00 0,10 3-932
(a) The rubber compound must be added when ordering by the 3-size number (i.e., N552-90 3-910).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
andtolerances. For more information on shrinkage rates, see the Appendix.
Table 9-2: Parker Series 3-XXX O-Rings Sizes
.056 Area = .00246
.064 Area = .00322
.072 Area = .00407
.078 Area = .00478
.082 Area = .00528
.087 Area = .00594
.097 Area = .00739
.116 Area = .01057
.118 Area = .01094
(sq. in.)