Fillable Sizes Parker Series 2-XXX O-Ring Sizes

Fill Online, Printable, Fillable, Blank Sizes Parker Series 2-XXX O-Ring Sizes Form

Use Fill to complete blank online OTHERS pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Sizes Parker Series 2-XXX O-Ring Sizes

On average this form takes 11 minutes to complete

The Sizes Parker Series 2-XXX O-Ring Sizes form is 9 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 45 other fields

Country of origin: OTHERS
File type: PDF

BROWSE OTHERS FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
9-2
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Sizes
Parker O-Ring Handbook
Sizes
2-001 -001 1/32 3/32 1/32 .029 .004 .040 .003 .0003 0,74 0,10 1,02 0,08 2-001
2-002 -002 3/64 9/64 3/64 .042 .004 .050 .003 .0006 1,07 0,10 1,27 0,08 2-002
2-003 -003 1/16 3/16 1/16 .056 .004 .060 .003 .0010 1,42 0,10 1,52 0,08 2-003
2-004 -004 5/64 13/64 1/16 .070 .005 .070 .003 .0017 1,78 0,13 1,78 0,08 2-004
2-005 -005 3/32 7/32 1/16 .101 .005 .070 .003 .0021 2,57 0,13 1,78 0,08 2-005
2-006 -006 1/8 1/4 1/16 .114 .005 .070 .003 .0022 2,90 0,13 1,78 0,08 2-006
2-007 -007 5/32 9/32 1/16 .145 .005 .070 .003 .0026 3,68 0,13 1,78 0,08 2-007
2-008 -008 3/16 5/16 1/16 .176 .005 .070 .003 .0030 4,47 0,13 1,78 0,08 2-008
2-009 -009 7/32 11/32 1/16 .208 .005 .070 .003 .0034 5,28 0,13 1,78 0,08 2-009
2-010 -010 1/4 3/8 1/16 .239 .005 .070 .003 .0037 6,07 0,13 1,78 0,08 2-010
2-011 -011 5/16 7/16 1/16 .301 .005 .070 .003 .0045 7,65 0,13 1,78 0,08 2-011
2-012 -012 3/8 1/2 1/16 .364 .005 .070 .003 .0052 9,25 0,13 1,78 0,08 2-012
2-013 -013 7/16 9/16 1/16 .426 .005 .070 .003 .0060 10,82 0,13 1,78 0,08 2-013
2-014 -014 1/2 5/8 1/16 .489 .005 .070 .003 .0068 12,42 0,13 1,78 0,08 2-014
2-015 -015 9/16 11/16 1/16 .551 .007 .070 .003 .0075 14,00 0,18 1,78 0,08 2-015
2-016 -016 5/8 3/4 1/16 .614 .009 .070 .003 .0083 15,60 0,23 1,78 0,08 2-016
2-017 -017 11/16 13/16 1/16 .676 .009 .070 .003 .0090 17,17 0,23 1,78 0,08 2-017
2-018 -018 3/4 7/8 1/16 .739 .009 .070 .003 .0098 18,77 0,23 1,78 0,08 2-018
2-019 -019 13/16 15/16 1/16 .801 .009 .070 .003 .0105 20,35 0,23 1,78 0,08 2-019
2-020 -020 7/8 1 1/16 .864 .009 .070 .003 .0113 21,95 0,23 1,78 0,08 2-020
2-021 -021 15/16 1-1/16 1/16 .926 .009 .070 .003 .0120 23,52 0,23 1,78 0,08 2-021
2-022 -022 1 1/8 1/16 .989 .010 .070 .003 .0128 25,12 0,25 1,78 0,08 2-022
2-023 -023 1-1/16 1-3/16 1/16 1.051 .010 .070 .003 .0136 26,70 0,25 1,78 0,08 2-023
2-024 -024 1-1/8 1-1/4 1/16 1.114 .010 .070 .003 .0143 28,30 0,25 1,78 0,08 2-024
2-025 -025 1-3/16 1-5/16 1/16 1.176 .011 .070 .003 .0151 29,87 0,28 1,78 0,08 2-025
2-026 -026 1-1/4 1-3/8 1/16 1.239 .011 .070 .003 .0158 31,47 0,28 1,78 0,08 2-026
2-027 -027 1-5/16 1-7/16 1/16 1.301 .011 .070 .003 .0166 33,05 0,28 1,78 0,08 2-027
2-028 -028 1-3/8 1-1/2 1/16 1.364 .013 .070 .003 .0173 34,65 0,33 1,78 0,08 2-028
2-029 -029 1-1/2 1-5/8 1/16 1.489 .013 .070 .003 .0188 37,82 0,33 1,78 0,08 2-029
2-030 -030 1-5/8 1-3/4 1/16 1.614 .013 .070 .003 .0204 41,00 0,33 1,78 0,08 2-030
2-031 -031 1-3/4 1-7/8 1/16 1.739 .015 .070 .003 .0219 44,17 0,38 1,78 0,08 2-031
2-032 -032 1-7/8 2 1/16 1.864 .015 .070 .003 .0234 47,35 0,38 1,78 0,08 2-032
2-033 -033 2 2-1/8 1/16 1.989 .018 .070 .003 .0249 50,52 0,46 1,78 0,08 2-033
2-034 -034 2-1/8 2-1/4 1/16 2.114 .018 .070 .003 .0264 53,70 0,46 1,78 0,08 2-034
2-035 -035 2-1/4 2-3/8 1/16 2.239 .018 .070 .003 .0279 56,87 0,46 1,78 0,08 2-035
2-036 -036 2-3/8 2-1/2 1/16 2.364 .018 .070 .003 .0294 60,05 0,46 1,78 0,08 2-036
2-037 -037 2-1/2 2-5/8 1/16 2.489 .018 .070 .003 .0309 63,22 0,46 1,78 0,08 2-037
2-038 -038 2-5/8 2-3/4 1/16 2.614 .020 .070 .003 .0324 66,40 0,51 1,78 0,08 2-038
2-039 -039 2-3/4 2-7/8 1/16 2.739 .020 .070 .003 .0340 69,57 0,51 1,78 0,08 2-039
2-040 -040 2-7/8 3 1/16 2.864 .020 .070 .003 .0355 72,75 0,51 1,78 0,08 2-040
.040 Area = .001256
.050 Area = .001964
.060 Area = .002827
.070 Area = .003848
(sq. in.)
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
Parker Series 2-XXX O-Ring Sizes
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
Next >
Table of Contents
Search
< Back
Section Contents
9-3
Sizes
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Parker O-Ring Handbook
2-041 -041 3 3-1/8 1/16 2.989 .024 .070 .003 .0370 75,92 0,61 1,78 0,08 2-041
2-042 -042 3-1/4 3-3/8 1/16 3.239 .024 .070 .003 .0400 82,27 0,61 1,78 0,08 2-042
2-043 -043 3-1/2 3-5/8 1/16 3.489 .024 .070 .003 .0430 88,62 0,61 1,78 0,08 2-043
2-044 -044 3-3/4 3-7/8 1/16 3.739 .027 .070 .003 .0460 94,97 0,69 1,78 0,08 2-044
2-045 -045 4 4-1/8 1/16 3.989 .027 .070 .003 .0491 101,32 0,69 1,78 0,08 2-045
2-046 -046 4-1/4 4-3/8 1/16 4.239 .030 .070 .003 .0521 107,67 0,76 1,78 0,08 2-046
2-047 -047 4-1/2 4-5/8 1/16 4.489 .030 .070 .003 .0551 114,02 0,76 1,78 0,08 2-047
2-048 -048 4-3/4 4-7/8 1/16 4.739 .030 .070 .003 .0581 120,37 0,76 1,78 0,08 2-048
2-049 -049 5 5-1/8 1/16 4.989 .037 .070 .003 .0612 126,72 0,94 1,78 0,08 2-049
2-050 -050 5-1/4 5-3/8 1/16 5.239 .037 .070 .003 .0642 133,07 0,94 1,78 0,08 2-050
2-102 -102 1/16 1/4 3/32 .049 .005 .103 .003 .0040 1,24 0,13 2,62 0,08 2-102
2-103 -103 3/32 9/32 3/32 .081 .005 .103 .003 .0048 2,06 0,13 2,62 0,08 2-103
2-104 -104 1/8 5/16 3/32 .112 .005 .103 .003 .0056 2,84 0,13 2,62 0,08 2-104
2-105 -105 5/32 11/32 3/32 .143 .005 .103 .003 .0064 3,63 0,13 2,62 0,08 2-105
2-106 -106 3/16 3/8 3/32 .174 .005 .103 .003 .0072 4,42 0,13 2,62 0,08 2-106
2-107 -107 7/32 13/32 3/32 .206 .005 .103 .003 .0081 5,23 0,13 2,62 0,08 2-107
2-108 -108 1/4 7/16 3/32 .237 .005 .103 .003 .0089 6,02 0,13 2,62 0,08 2-108
2-109 -109 5/16 1/2 3/32 .299 .005 .103 .003 .0105 7,59 0,13 2,62 0,08 2-109
2-110 -110 3/8 9/16 3/32 .362 .005 .103 .003 .0122 9,19 0,13 2,62 0,08 2-110
2-111 -111 7/16 5/8 3/32 .424 .005 .103 .003 .0138 10,77 0,13 2,62 0,08 2-111
2-112 -112 1/2 11/16 3/32 .487 .005 .103 .003 .0154 12,37 0,13 2,62 0,08 2-112
2-113 -113 9/16 3/4 3/32 .549 .007 .103 .003 .0171 13,94 0,18 2,62 0,08 2-113
2-114 -114 5/8 13/16 3/32 .612 .009 .103 .003 .0187 15,54 0,23 2,62 0,08 2-114
2-115 -115 11/16 7/8 3/32 .674 .009 .103 .003 .0203 17,12 0,23 2,62 0,08 2-115
2-116 -116 3/4 15/16 3/32 .737 .009 .103 .003 .0220 18,72 0,23 2,62 0,08 2-116
2-117 -117 13/16 1 3/32 .799 .010 .103 .003 .0236 20,29 0,25 2,62 0,08 2-117
2-118 -118 7/8 1-1/16 3/32 .862 .010 .103 .003 .0253 21,89 0,25 2,62 0,08 2-118
2-119 -119 15/16 1-1/8 3/32 .924 .010 .103 .003 .0269 23,47 0,25 2,62 0,08 2-119
2-120 -120 1 1-3/16 3/32 .987 .010 .103 .003 .0285 25,07 0,25 2,62 0,08 2-120
2-121 -121 1-1/16 1-1/4 3/32 1.049 .010 .103 .003 .0302 26,64 0,25 2,62 0,08 2-121
2-122 -122 1-1/8 1-5/16 3/32 1.112 .010 .103 .003 .0318 28,24 0,25 2,62 0,08 2-122
2-123 -123 1-3/16 1-3/8 3/32 1.174 .012 .103 .003 .0334 29,82 0,30 2,62 0,08 2-123
2-124 -124 1-1/4 1-7/16 3/32 1.237 .012 .103 .003 .0351 31,42 0,30 2,62 0,08 2-124
2-125 -125 1-5/16 1-1/2 3/32 1.299 .012 .103 .003 .0367 32,99 0,30 2,62 0,08 2-125
2-126 -126 1-3/8 1-9/16 3/32 1.362 .012 .103 .003 .0383 34,59 0,30 2,62 0,08 2-126
2-127 -127 1-7/16 1-5/8 3/32 1.424 .012 .103 .003 .0400 36,17 0,30 2,62 0,08 2-127
2-128 -128 1-1/2 1-11/16 3/32 1.487 .012 .103 .003 .0416 37,77 0,30 2,62 0,08 2-128
2-129 -129 1-9/16 1-3/4 3/32 1.549 .015 .103 .003 .0432 39,34 0,38 2,62 0,08 2-129
2-130 -130 1-5/8 1-13/16 3/32 1.612 .015 .103 .003 .0449 40,94 0,38 2,62 0,08 2-130
2-131 -131 1-11/16 1-7/8 3/32 1.674 .015 .103 .003 .0465 42,52 0,38 2,62 0,08 2-131
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-ringsmanufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
andtolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
.070 Area = .003848
.103 Area = .008332
(sq. in.)
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
Next >
Table of Contents
Search
< Back
Section Contents
9-4
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Sizes
Parker O-Ring Handbook
2-132 -132 1-3/4 1-15/16 3/32 1.737 .015 .103 .003 .0482 44,12 0,38 2,62 0,08 2-132
2-133 -133
1-13/16
2 3/32 1.799 .015 .103 .003 .0498 45,69 0,38 2,62 0,08 2-133
2-134 -134 1-7/8 2-1/16 3/32 1.862 .015 .103 .003 .0514 47,29 0,38 2,62 0,08 2-134
2-135 -135
1-15/16
2-1/8 3/32 1.925 .017 .103 .003 .0531 48,90 0,43 2,62 0,08 2-135
2-136 -136 2 2-3/16 3/32 1.987 .017 .103 .003 .0547 50,47 0,43 2,62 0,08 2-136
2-137 -137 2-1/16 2-1/4 3/32 2.050 .017 .103 .003 .0564 52,07 0,43 2,62 0,08 2-137
2-138 -138 2-1/8 2-5/16 3/32 2.112 .017 .103 .003 .0580 53,64 0,43 2,62 0,08 2-138
2-139 -139 2-3/16 2-3/8 3/32 2.175 .017 .103 .003 .0596 55,25 0,43 2,62 0,08 2-139
2-140 -140 2-1/4 2-7/16 3/32 2.237 .017 .103 .003 .0612 56,82 0,43 2,62 0,08 2-140
2-141 -141 2-5/16 2-1/2 3/32 2.300 .020 .103 .003 .0629 58,42 0,51 2,62 0,08 2-141
2-142 -142 2-3/8 2-9/16 3/32 2.362 .020 .103 .003 .0645 59,99 0,51 2,62 0,08 2-142
2-143 -143 2-7/16 2-5/8 3/32 2.425 .020 .103 .003 .0662 61,60 0,51 2,62 0,08 2-143
2-144 -144 2-1/2 2-11/16 3/32 2.487 .020 .103 .003 .0678 63,17 0,51 2,62 0,08 2-144
2-145 -145 2-9/16 2-3/4 3/32 2.550 .020 .103 .003 .0694 64,77 0,51 2,62 0,08 2-145
2-146 -146 2-5/8 2-13/16 3/32 2.612 .020 .103 .003 .0711 66,34 0,51 2,62 0,08 2-146
2-147 -147 2-11/16 2-7/8 3/32 2.675 .022 .103 .003 .0727 67,95 0,56 2,62 0,08 2-147
2-148 -148 2-3/4 2-15/16 3/32 2.737 .022 .103 .003 .0743 69,52 0,56 2,62 0,08 2-148
2-149 -149 2-13/16 3 3/32 2.800 .022 .103 .003 .0760 71,12 0,56 2,62 0,08 2-149
2-150 -150 2-7/8 3-1/16 3/32 2.862 .022 .103 .003 .0776 72,69 0,56 2,62 0,08 2-150
2-151 -151 3 3-3/16 3/32 2.987 .024 .103 .003 .0809 75,87 0,61 2,62 0,08 2-151
2-152 -152 3-1/4 3-7/16 3/32 3.237 .024 .103 .003 .0874 82,22 0,61 2,62 0,08 2-152
2-153 -153 3-1/2 3-11/16 3/32 3.487 .024 .103 .003 .0940 88,57 0,61 2,62 0,08 2-153
2-154 -154 3-3/4 3-15/16 3/32 3.737 .028 .103 .003 .1005 94,92 0,71 2,62 0,08 2-154
2-155 -155 4 4-3/16 3/32 3.987 .028 .103 .003 .1071 101,27 0,71 2,62 0,08 2-155
2-156 -156 4-1/4 4-7/16 3/32 4.237 .030 .103 .003 .1136 107,62 0,76 2,62 0,08 2-156
2-157 -157 4-1/2 4-11/16 3/32 4.487 .030 .103 .003 .1202 113,97 0,76 2,62 0,08 2-157
2-158 -158 4-3/4 4-15/16 3/32 4.737 .030 .103 .003 .1267 120,32 0,76 2,62 0,08 2-158
2-159 -159 5 5-3/16 3/32 4.987 .035 .103 .003 .1332 126,67 0,89 2,62 0,08 2-159
2-160 -160 5-1/4 5-7/16 3/32 5.237 .035 .103 .003 .1398 133,02 0,89 2,62 0,08 2-160
2-161 -161 5-1/2 5-11/16 3/32 5.487 .035 .103 .003 .1463 139,37 0,89 2,62 0,08 2-161
2-162 -162 5-3/4 5-15/16 3/32 5.737 .035 .103 .003 .1529 145,72 0,89 2,62 0,08 2-162
2-163 -163 6 6-3/16 3/32 5.987 .035 .103 .003 .1594 152,07 0,89 2,62 0,08 2-163
2-164 -164 6-1/4 6-7/16 3/32 6.237 .040 .103 .003 .1660 158,42 1,02 2,62 0,08 2-164
2-165 -165 6-1/2 6-11/16 3/32 6.487 .040 .103 .003 .1725 164,77 1,02 2,62 0,08 2-165
2-166 -166 6-3/4 6-15/16 3/32 6.737 .040 .103 .003 .1790 171,12 1,02 2,62 0,08 2-166
2-167 -167 7 7-3/16 3/32 6.987 .040 .103 .003 .1856 177,47 1,02 2,62 0,08 2-167
2-168 -168 7-1/4 7-7/16 3/32 7.237 .045 .103 .003 .1921 183,82 1,14 2,62 0,08 2-168
2-169 -169 7-1/2 7-11/16 3/32 7.487 .045 .103 .003 .1987 190,17 1,14 2,62 0,08 2-169
2-170 -170 7-3/4 7-15/16 3/32 7.737 .045 .103 .003 .2052 196,52 1,14 2,62 0,08 2-170
2-171 -171 8 8-3/16 3/32 7.987 .045 .103 .003 .2118 202,87 1,14 2,62 0,08 2-171
.103 Area = .008332
(sq. in.)
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
Next >
Table of Contents
Search
< Back
Section Contents
9-5
Sizes
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Parker O-Ring Handbook
2-172 -172 8-1/4 8-7/16 3/32 8.237 .050 .103 .003 .2183 209,22 1,27 2,62 0,08 2-172
2-173 -173 8-1/2 8-11/16 3/32 8.487 .050 .103 .003 .2249 215,57 1,27 2,62 0,08 2-173
2-174 -174 8-3/4 8-15/16 3/32 8.737 .050 .103 .003 .2314 221,92 1,27 2,62 0,08 2-174
2-175 -175 9 9-3/16 3/32 8.987 .050 .103 .003 .2379 228,27 1,27 2,62 0,08 2-175
2-176 -176 9-1/4 9-7/16 3/32 9.237 .055 .103 .003 .2445 234,62 1,40 2,62 0,08 2-176
2-177 -177 9-1/2 9-11/16 3/32 9.487 .055 .103 .003 .2510 240,97 1,40 2,62 0,08 2-177
2-178 -178 9-3/4 9-15/16 3/32 9.737 .055 .103 .003 .2576 247,32 1,40 2,62 0,08 2-178
2-201 -201 3/16 7/16 1/8 .171 .055 .139 .004 .0148 4,34 0,13 3,53 0,10 2-201
2-202 -202 1/4 1/2 1/8 .234 .005 .139 .004 .0178 5,94 0,13 3,53 0,10 2-202
2-203 -203 5/16 9/16 1/8 .296 .005 .139 .004 .0207 7,52 0,13 3,53 0,10 2-203
2-204 -204 3/8 5/8 1/8 .359 .005 .139 .004 .0237 9,12 0,13 3,53 0,10 2-204
2-205 -205 7/16 11/16 1/8 .421 .005 .139 .004 .0267 10,69 0,13 3,53 0,10 2-205
2-206 -206 1/2 3/4 1/8 .484 .005 .139 .004 .0297 12,29 0,13 3,53 0,10 2-206
2-207 -207 9/16 13/16 1/8 .546 .007 .139 .004 .0327 13,87 0,18 3,53 0,10 2-207
2-208 -208 5/8 7/8 1/8 .609 .009 .139 .004 .0357 15,47 0,23 3,53 0,10 2-208
2-209 -209 11/16 15/16 1/8 .671 .010 .139 .004 .0386 17,04 0,23 3,53 0,10 2-209
2-210 -210 3/4 1 1/8 .734 .010 .139 .004 .0416 18,64 0,25 3,53 0,10 2-210
2-211 -211 13/16 1-1/16 1/8 .796 .010 .139 .004 .0446 20,22 0,25 3,53 0,10 2-211
2-212 -212 7/8 1-1/8 1/8 .859 .010 .139 .004 .0476 21,82 0,25 3,53 0,10 2-212
2-213 -213 15/16 1-3/16 1/8 .921 .010 .139 .004 .0505 23,39 0,25 3,53 0,10 2-213
2-214 -214 1 1-1/4 1/8 .984 .010 .139 .004 .0535 24,99 0,25 3,53 0,10 2-214
2-215 -215 1-1/16 1-5/16 1/8 1.046 .010 .139 .004 .0565 26,57 0,25 3,53 0,10 2-215
2-216 -216 1-1/8 1-3/8 1/8 1.109 .012 .139 .004 .0595 28,17 0,30 3,53 0,10 2-216
2-217 -217 1-3/16 1-7/16 1/8 1.171 .012 .139 .004 .0624 29,74 0,30 3,53 0,10 2-217
2-218 -218 1-1/4 1-1/2 1/8 1.234 .012 .139 .004 .0654 31,34 0,30 3,53 0,10 2-218
2-219 -219 1-5/16 1-9/16 1/8 1.296 .012 .139 .004 .0684 32,92 0,30 3,53 0,10 2-219
2-220 -220 1-3/8 1-5/8 1/8 1.359 .012 .139 .004 .0714 34,52 0,30 3,53 0,10 2-220
2-221 -221 1-7/16 1-11/16 1/8 1.421 .012 .139 .004 .0744 36,09 0,30 3,53 0,10 2-221
2-222 -222 1-1/2 1-3/4 1/8 1.484 .015 .139 .004 .0774 37,69 0,38 3,53 0,10 2-222
2-223 -223 1-5/8 1-7/8 1/8 1.609 .015 .139 .004 .0833 40,87 0,38 3,53 0,10 2-223
2-224 -224 1-3/4 2 1/8 1.734 .015 .139 .004 .0893 44,04 0,38 3,53 0,10 2-224
2-225 -225 1-7/8 2-1/8 1/8 1.859 .018 .139 .004 .0952 47,22 0,46 3,53 0,10 2-225
2-226 -226 2 2-1/4 1/8 1.984 .018 .139 .004 .1012 50,39 0,46 3,53 0,10 2-226
2-227 -227 2-1/16 2-3/8 1/8 2.109 .018 .139 .004 .1072 53,57 0,46 3,53 0,10 2-227
2-228 -228 2-1/4 2-1/2 1/8 2.234 .020 .139 .004 .1131 56,74 0,51 3,53 0,10 2-228
2-229 -229 2-3/8 2-5/8 1/8 2.359 .020 .139 .004 .1191 59,92 0,51 3,53 0,10 2-229
2-230 -230 2-1/2 2-3/4 1/8 2.484 .020 .139 .004 .1250 63,09 0,51 3,53 0,10 2-230
2-231 -231 2-5/8 2-7/8 1/8 2.609 .020 .139 .004 .1310 66,27 0,51 3,53 0,10 2-231
2-232 -232 2-3/4 3 1/8 2.734 .024 .139 .004 .1370 69,44 0,61 3,53 0,10 2-232
2-233 -233 2-7/8
3-1/8 1/8 2.859 .024 .139 .004 .1429 72,62 0,61 3,53 0,10 2-233
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-ringsmanufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
.103 Area = .008332
.139 Area = .015175
(sq. in.)
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
Next >
Table of Contents
Search
< Back
Section Contents
9-6
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Sizes
Parker O-Ring Handbook
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
2-234 -234 3 3-1/4 1/8 2.984 .024 .139 .004 .1489 75,79 0,61 3,53 0,10 2-234
2-235 -235 3-1/8 3-3/8 1/8 3.109 .024 .139 .004 .1548 78,97 0,61 3,53 0,10 2-235
2-236 -236 3-1/4 3-1/2 1/8 3.234 .024 .139 .004 .1608 82,14 0,61 3,53 0,10 2-236
2-237 -237 3-3/8 3-5/8 1/8 3.359 .024 .139 .004 .1668 85,32 0,61 3,53 0,10 2-237
2-238 -238 3-1/2 3-3/4 1/8 3.484 .024 .139 .004 .1727 88,49 0,61 3,53 0,10 2-238
2-239 -239 3-5/8 3-7/8 1/8 3.609 .028 .139 .004 .1787 91,67 0,71 3,53 0,10 2-239
2-240 -240 3-3/4 4 1/8 3.734 .028 .139 .004 .1846 94,84 0,71 3,53 0,10 2-240
2-241 -241 3-7/8 4-1/8 1/8 3.859 .028 .139 .004 .1906 98,02 0,71 3,53 0,10 2-241
2-242 -242 4 4-1/4 1/8 3.984 .028 .139 .004 .1966 101,19 0,71 3,53 0,10 2-242
2-243 -243 4-1/8 4-3/8 1/8 4.109 .028 .139 .004 .2025 104,37 0,71 3,53 0,10 2-243
2-244 -244 4-1/4 4-1/2 1/8 4.234 .030 .139 .004 .2085 107,54 0,76 3,53 0,10 2-244
2-245 -245 4-3/8 4-5/8 1/8 4.359 .030 .139 .004 .2144 110,72 0,76 3,53 0,10 2-245
2-246 -246 4-1/2 4-3/4 1/8 4.484 .030 .139 .004 .2204 113,89 0,76 3,53 0,10 2-246
2-247 -247 4-5/8 4-7/8 1/8 4.609 .030 .139 .004 .2264 117,07 0,76 3,53 0,10 2-247
2-248 -248 4-3/4 5 1/8 4.734 .030 .139 .004 .2323 120,24 0,76 3,53 0,10 2-248
2-249 -249 4-7/8 5-1/8 1/8 4.859 .035 .139 .004 .2383 123,42 0,89 3,53 0,10 2-249
2-250 -250 5 5-1/4 1/8 4.984 .035 .139 .004 .2442 126,59 0,89 3,53 0,10 2-250
2-251 -251 5-1/8 5-3/8 1/8 5.109 .035 .139 .004 .2502 129,77 0,89 3,53 0,10 2-251
2-252 -252 5-1/4 5-1/2 1/8 5.234 .035 .139 .004 .2561 132,94 0,89 3,53 0,10 2-252
2-253 -253 5-3/8 5-5/8 1/8 5.359 .035 .139 .004 .2621 136,12 0,89 3,53 0,10 2-253
2-254 -254 5-1/2 5-3/4 1/8 5.484 .035 .139 .004 .2681 139,29 0,89 3,53 0,10 2-254
2-255 -255 5-5/8 5-7/8 1/8 5.609 .035 .139 .004 .2740 142,47 0,89 3,53 0,10 2-255
2-256 -256 5-3/4 6 1/8 5.734 .035 .139 .004 .2800 145,64 0,89 3,53 0,10 2-256
2-257 -257 5-7/8 6-1/8 1/8 5.859 .035 .139 .004 .2859 148,82 0,89 3,53 0,10 2-257
2-258 -258 6 6-1/4 1/8 5.984 .035 .139 .004 .2919 151,99 0,89 3,53 0,10 2-258
2-259 -259 6-1/4 6-1/2 1/8 6.234 .040 .139 .004 .3038 158,34 1,02 3,53 0,10 2-259
2-260 -260 6-1/2 6-3/4 1/8 6.484 .040 .139 .004 .3157 164,69 1,02 3,53 0,10 2-260
2-261 -261 6-3/4 7 1/8 6.734 .040 .139 .004 .3277 171,04 1,02 3,53 0,10 2-261
2-262 -262 7 7-1/4 1/8 6.984 .040 .139 .004 .3396 177,39 1,02 3,53 0,10 2-262
2-263 -263 7-1/4 7-1/2 1/8 7.234 .045 .139 .004 .3515 183,74 1,14 3,53 0,10 2-263
2-264 -264 7-1/2 7-3/4 1/8 7.484 .045 .139 .004 .3634 190,09 1,14 3,53 0,10 2-264
2-265 -265 7-3/4 8 1/8 7.734 .045 .139 .004 .3753 196,44 1,14 3,53 0,10 2-265
2-266 -266 8 8-1/4 1/8 7.984 .045 .139 .004 .3872 202,79 1,14 3,53 0,10 2-266
2-267 -267 8-1/4 8-1/2 1/8 8.234 .050 .139 .004 .3992 209,14 1,27 3,53 0,10 2-267
2-268 -268 8-1/2 8-3/4 1/8 8.484 .050 .139 .004 .4111 215,49 1,27 3,53 0,10 2-268
2-269 -269 8-3/4 9 1/8 8.734 .050 .139 .004 .4230 221,84 1,27 3,53 0,10 2-269
2-270 -270 9 9-1/4 1/8 8.984 .050 .139 .004 .4349 228,19 1,27 3,53 0,10 2-270
2-271 -271 9-1/4 9-1/2 1/8 9.234 .055 .139 .004 .4468 234,54 1,40 3,53 0,10 2-271
2-272 -272 9-1/2 9-3/4 1/8 9.484 .055 .139 .004 .4588 240,89 1,40 3,53 0,10 2-272
2-273 -273 9-3/4 10 1/8 9.734 .055 .139 .004 .4707 247,24 1,40 3,53 0,10 2-273
.139 Area = .015175
(sq. in.)
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
Next >
Table of Contents
Search
< Back
Section Contents
9-7
Sizes
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Parker O-Ring Handbook
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
2-274 -274 10 10-1/4 1/8 9.984 .055 .139 .004 .4826 253,59 1,40 3,53 0,10 2-274
2-275 -275 10-1/2 10-3/4 1/8 10.484 .055 .139 .004 .5064 266,29 1,40 3,53 0,10 2-275
2-276 -276 11 11-1/4 1/8 10.984 .065 .139 .004 .5303 278,99 1,65 3,53 0,10 2-276
2-277 -277 11-1/2 11-3/4 1/8 11.484 .065 .139 .004 .5541 291,69 1,65 3,53 0,10 2-277
2-278 -278 12 12-1/4 1/8 11.984 .065 .139 .004 .5779 304,39 1,65 3,53 0,10 2-278
2-279 -279 13 13-1/4 1/8 12.984 .065 .139 .004 .6256 329,79 1,65 3,53 0,10 2-279
2-280 -280 14 14-1/4 1/8 13.984 .065 .139 .004 .6733 355,19 1,65 3,53 0,10 2-280
2-281 -281 15 15-1/4 1/8 14.984 .065 .139 .004 .7210 380,59 1,65 3,53 0,10 2-281
2-282 -282 16 16-1/4 1/8 15.955 .075 .139 .004 .7672 405,26 1,91 3,53 0,10 2-282
2-283 -283 17 17-1/4 1/8 16.955 .080 .139 .004 .8149 430,66 2,03 3,53 0,10 2-283
2-284 -284 18 18-1/4 1/8 17.955 .085 .139 .004 .8626 456,06 2,16 3,53 0,10 2-284
2-309 -309 7/16 13/16 3/16 .412 .005 .210 .005 .0677 10,46 0,13 5,33 0,13 2-309
2-310 -310 1/2 7/8 3/16 .475 .005 .210 .005 .0745 12,07 0,13 5,33 0,13 2-310
2-311 -311 9/16 15/16 3/16 .537 .007 .210 .005 .0813 13,64 0,18 5,33 0,13 2-311
2-312 -312 5/8 1 3/16 .600 .009 .210 .005 .0881 15,24 0,23 5,33 0,13 2-312
2-313 -313 11/16 1-1/16 3/16 .662 .009 .210 .005 .0949 16,81 0,23 5,33 0,13 2-313
2-314 -314 3/4 1-1/8 3/16 .725 .010 .210 .005 .1017 18,42 0,25 5,33 0,13 2-314
2-315 -315 13/16 1-3/16 3/16 .787 .010 .210 .005 .1085 19,99 0,25 5,33 0,13 2-315
2-316 -316 7/8 1-1/4 3/16 .850 .010 .210 .005 .1153 21,59 0,25 5,33 0,13 2-316
2-317 -317 15/16 1-5/16 3/16 .912 .010 .210 .005 .1221 23,16 0,25 5,33 0,13 2-317
2-318 -318 1 1-3/8 3/16 .975 .010 .210 .005 .1289 24,77 0,25 5,33 0,13 2-318
2-319 -319 1-1/16 1-7/16 3/16 1.037 .010 .210 .005 .1357 26,34 0,25 5,33 0,13 2-319
2-320 -320 1-1/8 1-1/2 3/16 1.100 .012 .210 .005 .1425 27,94 0,30 5,33 0,13 2-320
2-321 -321 1-3/16 1-9/16 3/16 1.162 .012 .210 .005 .1493 29,51 0,30 5,33 0,13 2-321
2-322 -322 1-1/4 1-5/8 3/16 1.225 .012 .210 .005 .1561 31,12 0,30 5,33 0,13 2-322
2-323 -323 1-5/16 1-11/16 3/16 1.287 .012 .210 .005 .1629 32,69 0,30 5,33 0,13 2-323
2-324 -324 1-3/8 1-3/4 3/16 1.350 .012 .210 .005 .1697 34,29 0,30 5,33 0,13 2-324
2-325 -325 1-1/2 1-7/8 3/16 1.475 .015 .210 .005 .1833 37,47 0,38 5,33 0,13 2-325
2-326 -326 1-5/8 2 3/16 1.600 .015 .210 .005 .1970 40,64 0,38 5,33 0,13 2-326
2-327 -327 1-3/4 2-1/8 3/16 1.725 .015 .210 .005 .2106 43,82 0,38 5,33 0,13 2-327
2-328 -328 1-7/8 2-1/4 3/16 1.850 .015 .210 .005 .2242 46,99 0,38 5,33 0,13 2-328
2-329 -329 2 2-3/8 3/16 1.975 .018 .210 .005 .2378 50,17 0,46 5,33 0,13 2-329
2-330 -330 2-1/8 2-1/2 3/16 2.100 .018 .210 .005 .2514 53,34 0,46 5,33 0,13 2-330
2-331 -331 2-1/4 2-5/8 3/16 2.225 .018 .210 .005 .2650 56,52 0,46 5,33 0,13 2-331
2-332 -332 2-3/8 2-3/4 3/16 2.350 .018 .210 .005 .2786 59,69 0,46 5,33 0,13 2-332
2-333 -333 2-1/2 2-7/8 3/16 2.475 .020 .210 .005 .2922 62,87 0,51 5,33 0,13 2-333
2-334 -334 2-5/8 3 3/16 2.600 .020 .210 .005 .3058 66,04 0,51 5,33 0,13 2-334
2-335 -335 2-3/4 3-1/8 3/16 2.725 .020 .210 .005 .3194 69,22 0,51 5,33 0,13 2-335
2-336 -336 2-7/8 3-1/4 3/16 2.850 .020 .210 .005 .3330 72,39 0,51 5,33 0,13 2-336
2-337 -337 3 3-3/8 3/16 2.975 .024 .210 .005 .3466 75,57 0,61 5,33 0,13 2-337
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-ringsmanufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
.139 Area = .015175
.210 Area = .034636
(sq. in.)
Next >
Table of Contents
Search
< Back
Section Contents
9-8
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Sizes
Parker O-Ring Handbook
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
2-338 -338 3-1/8 3-1/2 3/16 3.100 .024 .210 .005 .3602 78,74 0,61 5,33 0,13 2-338
2-339 -339 3-1/4 3-5/8 3/16 3.225 .024 .210 .005 .3738 81,92 0,61 5,33 0,13 2-339
2-340 -340 3-3/8 3-3/4 3/16 3.350 .024 .210 .005 .3874 85,09 0,61 5,33 0,13 2-340
2-341 -341 3-1/2 3-7/8 3/16 3.475 .024 .210 .005 .4010 88,27 0,61 5,33 0,13 2-341
2-342 -342 3-5/8 4 3/16 3.600 .028 .210 .005 .4146 91,44 0,71 5,33 0,13 2-342
2-343 -343 3-3/4 4-1/8 3/16 3.725 .028 .210 .005 .4282 94,62 0,71 5,33 0,13 2-343
2-344 -344 3-7/8 4-1/4 3/16 3.850 .028 .210 .005 .4418 97,79 0,71 5,33 0,13 2-344
2-345 -345 4 4-3/8 3/16 3.975 .028 .210 .005 .4554 100,97 0,71 5,33 0,13 2-345
2-346 -346 4-1/8 4-1/2 3/16 4.100 .028 .210 .005 .4690 104,14 0,71 5,33 0,13 2-346
2-347 -347 4-1/4 4-5/8 3/16 4.225 .030 .210 .005 .4826 107,32 0,76 5,33 0,13 2-347
2-348 -348 4-3/8 4-3/4 3/16 4.350 .030 .210 .005 .4962 110,49 0,76 5,33 0,13 2-348
2-349 -349 4-1/2 4-7/8 3/16 4.475 .030 .210 .005 .5098 113,67 0,76 5,33 0,13 2-349
2-350 -350 4-5/8 5 3/16 4.600 .030 .210 .005 .5234 116,84 0,76 5,33 0,13 2-350
2-351 -351 4-3/4 5-1/8 3/16 4.725 .030 .210 .005 .5370 120,02 0,76 5,33 0,13 2-351
2-352 -352 4-7/8 5-1/4 3/16 4.850 .030 .210 .005 .5506 123,19 0,76 5,33 0,13 2-352
2-353 -353 5 5-3/8 3/16 4.975 .037 .210 .005 .5642 126,37 0,94 5,33 0,13 2-353
2-354 -354 5-1/8 5-1/2 3/16 5.100 .037 .210 .005 .5778 129,54 0,94 5,33 0,13 2-354
2-355 -355 5-1/4 5-5/8 3/16 5.225 .037 .210 .005 .5914 132,72 0,94 5,33 0,13 2-355
2-356 -356 5-3/8 5-3/4 3/16 5.350 .037 .210 .005 .6050 135,89 0,94 5,33 0,13 2-356
2-357 -357 5-1/2 5-7/8 3/16 5.475 .037 .210 .005 .6186 139,07 0,94 5,33 0,13 2-357
2-358 -358 5-5/8 6 3/16 5.600 .037 .210 .005 .6322 142,24 0,94 5,33 0,13 2-358
2-359 -359 5-3/4 6-1/8 3/16 5.725 .037 .210 .005 .6458 145,42 0,94 5,33 0,13 2-359
2-360 -360 5-7/8 6-1/4 3/16 5.850 .037 .210 .005 .6594 148,59 0,94 5,33 0,13 2-360
2-361 -361 6 6-3/8 3/16 5.975 .037 .210 .005 .6730 151,77 0,94 5,33 0,13 2-361
2-362 -362 6-1/4 6-5/8 3/16 6.225 .040 .210 .005 .7002 158,12 1,02 5,33 0,13 2-362
2-363 -363 6-1/2 6-7/8 3/16 6.475 .040 .210 .005 .7274 164,47 1,02 5,33 0,13 2-363
2-364 -364 6-3/4 7-1/8 3/16 6.725 .040 .210 .005 .7546 170,82 1,02 5,33 0,13 2-364
2-365 -365 7 7-3/8 3/16 6.975 .040 .210 .005 .7818 177,17 1,02 5,33 0,13 2-365
2-366 -366 7-1/4 7-5/8 3/16 7.225 .045 .210 .005 .8090 183,52 1,14 5,33 0,13 2-366
2-367 -367 7-1/2 7-7/8 3/16 7.475 .045 .210 .005 .8362 189,87 1,14 5,33 0,13 2-367
2-368 -368 7-3/4 8-1/8 3/16 7.725 .045 .210 .005 .8634 196,22 1,14 5,33 0,13 2-368
2-369 -369 8 8-3/8 3/16 7.975 .045 .210 .005 .8906 202,57 1,14 5,33 0,13 2-369
2-370 -370 8-1/4 8-5/8 3/16 8.225 .050 .210 .005 .9178 208,92 1,27 5,33 0,13 2-370
2-371 -371 8-1/2 8-7/8 3/16 8.475 .050 .210 .005 .9450 215,27 1,27 5,33 0,13 2-371
2-372 -372 8-3/4 9-1/8 3/16 8.725 .050 .210 .005 .9722 221,62 1,27 5,33 0,13 2-372
2-373 -373 9 9-3/8 3/16 8.975 .050 .210 .005 .9994 227,97 1,27 5,33 0,13 2-373
2-374 -374 9-1/4 9-5/8 3/16 9.225 .055 .210 .005 1.0266 234,32 1,40 5,33 0,13 2-374
2-375 -375 9-1/2 9-7/8 3/16 9.475 .055 .210 .005 1.0538 240,67 1,40 5,33 0,13 2-375
2-376 -376 9-3/4 10-1/8 3/16 9.725 .055 .210 .005 1.0810 247,02 1,40 5,33 0,13 2-376
2-377 -377 10 10-3/8 3/16 9.975 .055 .210 .005 1.1083 253,37 1,40 5,33 0,13 2-377
.210 Area = .034636
(sq. in.)
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
Next >
Table of Contents
Search
< Back
Section Contents
9-9
Sizes
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Parker O-Ring Handbook
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
2-378 -378 10-1/2 10-7/8 3/16 10.475 .060 .210 .005 1.1627 266,07 1,52 5,33 0,13 2-378
2-379 -379 11 11-3/8 3/16 10.975 .060 .210 .005 1.2171 278,77 1,52 5,33 0,13 2-379
2-380 -380 11-1/2 11-7/8 3/16 11.475 .065 .210 .005 1.2715 291,47 1,65 5,33 0,13 2-380
2-381 -381 12 12-3/8 3/16 11.975 .065 .210 .005 1.3259 304,17 1,65 5,33 0,13 2-381
2-382 -382 13 13-3/8 3/16 12.975 .065 .210 .005 1.4347 329,57 1,65 5,33 0,13 2-382
2-383 -383 14 14-3/8 3/16 13.975 .070 .210 .005 1.5435 354,97 1,78 5,33 0,13 2-383
2-384 -384 15 15-3/8 3/16 14.975 .070 .210 .005 1.6523 380,37 1,78 5,33 0,13 2-384
2-385 -385 16 16-3/8 3/16 15.955 .075 .210 .005 1.7590 405,26 1,91 5,33 0,13 2-385
2-386 -386 17 17-3/8 3/16 16.955 .080 .210 .005 1.8678 430,66 2,03 5,33 0,13 2-386
2-387 -387 18 18-3/8 3/16 17.955 .085 .210 .005 1.9766 456,06 2,16 5,33 0,13 2-387
2-388 -388 19 19-3/8 3/16 18.955 .090 .210 .005 2.0854 481,46 2,29 5,33 0,13 2-388
2-389 -389 20 20-3/8 3/16 19.955 .095 .210 .005 2.1942 506,86 2,41 5,33 0,13 2-389
2-390 -390 21 21-3/8 3/16 20.955 .095 .210 .005 2.3030 532,26 2,41 5,33 0,13 2-390
2-391 -391 22 22-3/8 3/16 21.955 .100 .210 .005 2.4118 557,66 2,54 5,33 0,13 2-391
2-392 -392 23 23-3/8 3/16 22.940 .105 .210 .005 2.5190 582,68 2,67 5,33 0,13 2-392
2-393 -393 24 24-3/8 3/16 23.940 .110 .210 .005 2.6278 608,08 2,79 5,33 0,13 2-393
2-394 -394 25 25-3/8 3/16 24.940 .115 .210 .005 2.7366 633,48 2,92 5,33 0,13 2-394
2-395 -395 26 26-3/8 3/16 25.940 .120 .210 .005 2.8454 658,88 3,05 5,33 0,13 2-395
2-425 -425 4-1/2 5 1/4 4.475 .033 .275 .006 .8863 113,67 0,84 6,99 0,15 2-425
2-426 -426 4-5/8 5-1/8 1/4 4.600 .033 .275 .006 .9097 116,84 0,84 6,99 0,15 2-426
2-427 -427 4-3/4 5-1/4 1/4 4.725 .033 .275 .006 .9330 120,02 0,84 6,99 0,15 2-427
2-428 -428 4-7/8 5-3/8 1/4 4.850 .033 .275 .006 .9563 123,19 0,84 6,99 0,15 2-428
2-429 -429 5 5-1/2 1/4 4.975 .037 .275 .006 .9796 126,37 0,94 6,99 0,15 2-429
2-430 -430 5-1/8 5-5/8 1/4 5.100 .037 .275 .006 1.0030 129,54 0,94 6,99 0,15 2-430
2-431 -431 5-1/4 5-3/4 1/4 5.225 .037 .275 .006 1.0263 132,72 0,94 6,99 0,15 2-431
2-432 -432 5-3/8 5-7/8 1/4 5.350 .037 .275 .006 1.0496 135,89 0,94 6,99 0,15 2-432
2-433 -433 5-1/2 6 1/4 5.475 .037 .275 .006 1.0729 139,07 0,94 6,99 0,15 2-433
2-434 -434 5-5/8 6-1/8 1/4 5.600 .037 .275 .006 1.0963 142,24 0,94 6,99 0,15 2-434
2-435 -435 5-3/4 6-1/4 1/4 5.725 .037 .275 .006 1.1196 145,42 0,94 6,99 0,15 2-435
2-436 -436 5-7/8 6-3/8 1/4 5.850 .037 .275 .006 1.1429 148,59 0,94 6,99 0,15 2-436
2-437 -437 6 6-1/2 1/4 5.975 .037 .275 .006 1.1662 151,77 0,94 6,99 0,15 2-437
2-438 -438 6-1/4 6-3/4 1/4 6.225 .040 .275 .006 1.2129 158,12 1,02 6,99 0,15 2-438
2-439 -439 6-1/2 7 1/4 6.475 .040 .275 .006 1.2595 164,47 1,02 6,99 0,15 2-439
2-440 -440 6-3/4 7-1/4 1/4 6.725 .040 .275 .006 1.3062 170,82 1,02 6,99 0,15 2-440
2-441 -441 7 7-1/2 1/4 6.975 .040 .275 .006 1.3528 177,17 1,02 6,99 0,15 2-441
2-442 -442 7-1/4 7-3/4 1/4 7.225 .045 .275 .006 1.3995 183,52 1,14 6,99 0,15 2-442
2-443 -443 7-1/2 8 1/4 7.475 .045 .275 .006 1.4461 189,87 1,14 6,99 0,15 2-443
2-444 -444 7-3/4 8-1/4 1/4 7.725 .045 .275 .006 1.4928 196,22 1,14 6,99 0,15 2-444
2-445 -445 8 8-1/2 1/4 7.975 .045 .275 .006 1.5394 202,57 1,14 6,99 0,15 2-445
2-446 -446 8-1/2 9 1/4 8.475 .055 .275 .006 1.6327 215,27 1,40 6,99 0,15 2-446
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
.210 Area = .034636
.275 Area = .059396
(sq. in.)
Next >
Table of Contents
Search
< Back
Section Contents
9-10
Parker Hannifi n Corporation • O-Ring Division
2360 Palumbo Drive, Lexington, KY 40509
Phone: (859) 269-2351 • Fax: (859) 335-5128
www.parkerorings.com
Sizes
Parker O-Ring Handbook
Parker Series 2-XXX O-Ring Sizes (Continued)
12 3 4 5 6 7
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Inches)
Standard O-Ring Size
(Units are in Inches)
Actual (b) Per AS 568A
(Ref.
Only)
Metric O-Ring Size
(Units are in Millimeteres)
Actual (b) Per AS 568A
Parker
Size No.
(Size Only)
(a)
AS 568A
Uniform
Dash No.
(Ref. Only)
I.D.
Tolerance
±
W±
Basic
Volume
Cu. In. I.D.
Tolerance
±
W±I.D. O.D. W.
2-447 -447 9 9-1/2 1/4
8.975
.055 .275 .006 1.7260
227,97
1,40 6,99 0,15 2-447
2-448 -448 9-1/2 10 1/4
9.475
.055 .275 .006 1.8193
240,67
1,40 6,99 0,15 2-448
2-449 -449 10 10-1/2 1/4
9.975
.055 .275 .006 1.9126
253,37
1,40 6,99 0,15 2-449
2-450 -450 10-1/2 11 1/4
10.475
.060 .275 .006 2.0059
266,07
1,52 6,99 0,15 2-450
2-451 -451 11 11-1/2 1/4
10.975
.060 .275 .006 2.0992
278,77
1,52 6,99 0,15 2-451
2-452 -452 11 1/2 12 1/4
11.475
.060 .275 .006 2.1925
291,47
1,52 6,99 0,15 2-452
2-453 -453 12 12-1/2 1/4
11.975
.060 .275 .006 2.2858
304,17
1,52 6,99 0,15 2-453
2-454 -454 12-1/2 13 1/4
12.475
.060 .275 .006 2.3791
316,87
1,52 6,99 0,15 2-454
2-455 -455 13 13-1/2 1/4
12.975
.060 .275 .006 2.4724
329,57
1,52 6,99 0,15 2-455
2-456 -456 13-1/2 14 1/4
13.475
.070 .275 .006 2.5657
342,27
1,78 6,99 0,15 2-456
2-457 -457 14 14-1/2 1/4
13.975
.070 .275 .006 2.6590
354,97
1,78 6,99 0,15 2-457
2-458 -458 14-1/2 15 1/4
14.475
.070 .275 .006 2.7523
367,67
1,78 6,99 0,15 2-458
2-459 -459 15 15-1/2 1/4
14.975
.070 .275 .006 2.8456
380,37
1,78 6,99 0,15 2-459
2-460 -460 15-1/2 16 1/4
15.475
.070 .275 .006 2.9389
393,07
1,78 6,99 0,15 2-460
2-461 -461 16 16-1/2 1/4
15.955
.075 .275 .006 3.0285
405,26
1,91 6,99 0,15 2-461
2-462 -462 16-1/2 17 1/4
16.455
.075 .275 .006 3.1218
417,96
1,91 6,99 0,15 2-462
2-463 -463 17 17-1/2 1/4
16.955
.080 .275 .006 3.2151
430,66
2,03 6,99 0,15 2-463
2-464 -464 17-1/2 18 1/4
17.455
.085 .275 .006 3.3084
443,36
2,16 6,99 0,15 2-464
2-465 -465 18 18-1/2 1/4
17.955
.085 .275 .006 3.4017
456,06
2,16 6,99 0,15 2-465
2-466 -466 18-1/2 19 1/4
18.455
.085 .275 .006 3.4950
468,76
2,16 6,99 0,15 2-466
2-467 -467 19 19-1/2 1/4
18.955
.090 .275 .006 3.5883
481,46
2,29 6,99 0,15 2-467
2-468 -468 19-1/2 20 1/4
19.455
.090 .275 .006 3.6816
494,16
2,29 6,99 0,15 2-468
2-469 -469 20 20-1/2 1/4
19.955
.095 .275 .006 3.7749
506,86
2,41 6,99 0,15 2-469
2-470 -470 21 21-1/2 1/4
20.955
.095 .275 .006 3.9615
532,26
2,41 6,99 0,15 2-470
2-471 -471 22 22-1/2 1/4
21.955
.100 .275 .006 4.1481
557,66
2,54 6,99 0,15 2-471
2-472 -472 23 23-1/2 1/4
22.940
.105 .275 .006 4.3319
582,68
2,67 6,99 0,15 2-472
2-473 -473 24 24-1/2 1/4
23.940
.110 .275 .006 4.5185
608,08
2,79 6,99 0,15 2-473
2-474 -474 25 25-1/2 1/4
24.940
.115 .275 .006 4.7051
633,48
2,92 6,99 0,15 2-474
2-475 -475 26 26-1/2 1/4
25.940
.120 .275 .006 4.8917
658,88
3,05 6,99 0,15 2-475
(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674-70 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specifi cation, see Section VIII, Specifi cations, for more information.
Table 9-1: Parker Series 2-XXX O-Ring Sizes
.275 Area = .059396
(sq. in.)
Next >
Table of Contents
Search
< Back
Section Contents
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Sizes Parker Series 2-XXX O-Ring Sizes

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 28 December 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document