FIRE ALARM INSTALLATION CERTIFICATE
After completion of an installation, modification, or addition of a system or single station detector (excluding a one
or two family residence) the licensee shall complete and present this certificate to the owner or their representative
or post the certificate near the main control panel according to the Fire Alarm Rules 28TAC§34.617
DISTRIBUTION: Original to owner or posted on site at control panel. Copy 1 to main authority having
jurisdiction. Copy 2 Certifying firm to retain in their office for access by SFMO.
The system complies with the following codes and standards.
Name of nearest Fire Department:
Fire Department (non-emergency) Phone:
Control Panel Manufacturer:
Check all the applicable system types below that were installed by the above certifying firm or the system type(s) in which the firm made modifications or additions.
Sprinkler System Supervision
Magnetic Door Holder/Release
Gas Fire Protection Syst.
Record Drawings (One with original planner’s signature.)
Instructions describing, operation, test & maintenance
Information to aid in establishing an Emergency Evacuation Plan
The above required documents were supplied to:
I hereby certify, on behalf of the registered certifying firm, that this fire alarm system has been tested and complies
with the requirements of Texas Insurance Code, Chapter 6002, the Fire Alarm Rules, the applicable codes and standards
and the manufacturer's installation requirements.
Printed name of Licensee:
SF035 | 0615 FML-009A
click to sign
signature
click to edit