Fillable Range Hood Systems Report (City of Oakland)

Fill Online, Printable, Fillable, Blank Range Hood Systems Report (City of Oakland) Form

Use Fill to complete blank online CITY OF OAKLAND (CA) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Range Hood Systems Report (City of Oakland)

On average this form takes 26 minutes to complete

The Range Hood Systems Report (City of Oakland) form is 1 page long and contains:

  • 2 signatures
  • 116 check-boxes
  • 40 other fields

Country of origin: US
File type: PDF

U.S.A. forms for City of Oakland

BROWSE CITY OF OAKLAND (CA) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
TOLL FREE: 888-4-MARMIC
(627642)
CUSTOMER
Name
Address
City
Telephone
Store No.
Owner or Manager
Range Hood Systems Report
A.M. P.M.
ANNUAL SEMI-ANNUAL RECHARGE INSTALLATION RENOVATION
LOCATION OF SYSTEM CYLINDERS
MANUFACTURER MODEL NUMBER WET DRY CHEMICAL
SIZE OF SYSTEM CYLINDER SIZE
FUSE LINKS 360°F FUSE LINKS 450°F FUSE LINKS 500°F OTHER
FUE
L
S
HUT-OF
F
ELECTRIC GAS SIZE
SERIAL NUMBER
NEW OR LAST HYDRO TEST DATE
LAST RECHARGE DATE
MANUFACTURER’S MANUAL REFERENCE
PAGE NUMBER: DRAWING NUMBER:
COOKING APPLIANCE LOCATIONS:
No
2
0. Replaced fuse links
21. Check travel of cable nuts/S-hooks
22. Piping & conduit securely bracketed
23. Proper separation between fryers & flame
24. Proper clearance-flame to filters
25. Exhaust fan in operating order
26. All filters replaced
27. Fuel shut-off in on position
28. Manual & remote set/seals in place
29. Replace systems covers
30. System operational & seals in place
31. Slave system operational
32. Clean cylinder & mount
33. Fan warning sign on hood
34. Personnel instructed in manual operation of system
35. Proper hand portable extinguishers
36. Portable extinguishers properly serviced
37. Service & Certification tag on system
38. System UL-300 Compliant?
Yes
1. All appliances properly covered w/correct nozzles
2. Duct and plenum covered w/correct nozzles
3. Check positioning of all nozzles
4. System installed in accordance w/MFG UL listing
5. Hood/duct penetrations sealed w/weld or UL device
6. Check if seals intact, evidence of tampering
7. If system has been discharged, report same
8. Pressure gauge in proper range
9. Check cartridge weight
10.Inspect cylinder and mount
11.Operate system from terminal link
12.Test for proper operation from remote
13.Check operation of micro switch
14.Check operation of gas valve
15.Clean nozzles
16.Proper nozzle covers in place
17.Check fuse links and clean
18.Hydrostatic test date(s)
19.Next hydrostatic test maintenance due date
COMMENTS:
On this date, the above system was tested and inspected in accordance with procedures of the presently adopted editions of
NFPA 17, 17A, and the manufacturer’s manual and was operated according to these procedures with results indicated above.
The above service technician certifies that the system was personally inspected and found conditions to be as indicated on this report.
X
SERVICE TECHNICIAN PERMIT NO. DATE TIME AM PM CUSTOMER’S AUTHORIZED AGENT
DATE OF SERVICE
TIME
ADD picture(s) of appliance line(s) showing nozzle locations as ST job attachment
YES NO n/a YES NO n/a
N/A
LIST OF
NOZZLES ON
SYSTEM
**ARM SYSTEM UPON COMPLETION
*
NOTE DEFICIENCIE BELOW UNDER COMMENTS
Seafood
Pyro chem
Pcl460
Single tank
3 gal
3 gal
Schnucks Lindell
3
1.25
St. Louis
297548
2018
(314) 533-8027
227
Robert Henry
✔
Fryers need shifted back under nozzles
4/22/21
✔
6 appliance nozzles over 3 fryers and one steamer
4/22/21
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11694 Lackland Road
St. Louis
MO
✔
16g
✔
✔
✔
✔
✔
✔
✔
✔
2018
2030
Pull station needs replaced
1 duct nozzle 1 plenum nozzle
click to sign
signature
click to edit
click to sign
signature
click to edit
TOLL FREE: 888-4-MARMIC
(627642)
CUSTOMER
Name
Address
City
Telephone
Store No.
Owner or Manager
Range Hood Systems Report
A.M. P.M.
ANNUAL SEMI-ANNUAL RECHARGE INSTALLATION RENOVATION
LOCATION OF SYSTEM CYLINDERS
MANUFACTURER MODEL NUMBER WET DRY CHEMICAL
SIZE OF SYSTEM CYLINDER SIZE
FUSE LINKS 360°F FUSE LINKS 450°F FUSE LINKS 500°F OTHER
FUE
L
S
HUT-OF
F
ELECTRIC GAS SIZE
SERIAL NUMBER
NEW OR LAST HYDRO TEST DATE
LAST RECHARGE DATE
MANUFACTURER’S MANUAL REFERENCE
PAGE NUMBER: DRAWING NUMBER:
COOKING APPLIANCE LOCATIONS:
No
2
0. Replaced fuse links
21. Check travel of cable nuts/S-hooks
22. Piping & conduit securely bracketed
23. Proper separation between fryers & flame
24. Proper clearance-flame to filters
25. Exhaust fan in operating order
26. All filters replaced
27. Fuel shut-off in on position
28. Manual & remote set/seals in place
29. Replace systems covers
30. System operational & seals in place
31. Slave system operational
32. Clean cylinder & mount
33. Fan warning sign on hood
34. Personnel instructed in manual operation of system
35. Proper hand portable extinguishers
36. Portable extinguishers properly serviced
37. Service & Certification tag on system
38. System UL-300 Compliant?
Yes
1. All appliances properly covered w/correct nozzles
2. Duct and plenum covered w/correct nozzles
3. Check positioning of all nozzles
4. System installed in accordance w/MFG UL listing
5. Hood/duct penetrations sealed w/weld or UL device
6. Check if seals intact, evidence of tampering
7. If system has been discharged, report same
8. Pressure gauge in proper range
9. Check cartridge weight
10.Inspect cylinder and mount
11.Operate system from terminal link
12.Test for proper operation from remote
13.Check operation of micro switch
14.Check operation of gas valve
15.Clean nozzles
16.Proper nozzle covers in place
17.Check fuse links and clean
18.Hydrostatic test date(s)
19.Next hydrostatic test maintenance due date
COMMENTS:
On this date, the above system was tested and inspected in accordance with procedures of the presently adopted editions of
NFPA 17, 17A, and the manufacturer’s manual and was operated according to these procedures with results indicated above.
The above service technician certifies that the system was personally inspected and found conditions to be as indicated on this report.
X
SERVICE TECHNICIAN PERMIT NO. DATE TIME AM PM CUSTOMER’S AUTHORIZED AGENT
DATE OF SERVICE
TIME
ADD picture(s) of appliance line(s) showing nozzle locations as ST job attachment
YES NO n/a YES NO n/a
N/A
LIST OF
NOZZLES ON
SYSTEM
**ARM SYSTEM UPON COMPLETION
*
NOTE DEFICIENCIE BELOW UNDER COMMENTS
Deli
Pyro chem
Please 300
X
300
3 gal
Schnucks Lindell
1
N/a
St. Louis
798731
2018
(314) 533-8027
227
Robert Henry
✔
Pull station needs replaced.
4/22/21
✔
2 appliance nozzles covering rotisserie
4/22/21
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11694 Lackland Road
St. Louis
MO
✔
16 g
✔
✔
✔
✔
✔
✔
✔
✔
2018
2030
1 duct 1 plenum
TOLL FREE: 888-4-MARMIC
(627642)
CUSTOMER
Name
Address
City
Telephone
Store No.
Owner or Manager
Range Hood Systems Report
A.M. P.M.
ANNUAL SEMI-ANNUAL RECHARGE INSTALLATION RENOVATION
LOCATION OF SYSTEM CYLINDERS
MANUFACTURER MODEL NUMBER WET DRY CHEMICAL
SIZE OF SYSTEM CYLINDER SIZE
FUSE LINKS 360°F FUSE LINKS 450°F FUSE LINKS 500°F OTHER
FUE
L
S
HUT-OF
F
ELECTRIC GAS SIZE
SERIAL NUMBER
NEW OR LAST HYDRO TEST DATE
LAST RECHARGE DATE
MANUFACTURER’S MANUAL REFERENCE
PAGE NUMBER: DRAWING NUMBER:
COOKING APPLIANCE LOCATIONS:
No
2
0. Replaced fuse links
21. Check travel of cable nuts/S-hooks
22. Piping & conduit securely bracketed
23. Proper separation between fryers & flame
24. Proper clearance-flame to filters
25. Exhaust fan in operating order
26. All filters replaced
27. Fuel shut-off in on position
28. Manual & remote set/seals in place
29. Replace systems covers
30. System operational & seals in place
31. Slave system operational
32. Clean cylinder & mount
33. Fan warning sign on hood
34. Personnel instructed in manual operation of system
35. Proper hand portable extinguishers
36. Portable extinguishers properly serviced
37. Service & Certification tag on system
38. System UL-300 Compliant?
Yes
1. All appliances properly covered w/correct nozzles
2. Duct and plenum covered w/correct nozzles
3. Check positioning of all nozzles
4. System installed in accordance w/MFG UL listing
5. Hood/duct penetrations sealed w/weld or UL device
6. Check if seals intact, evidence of tampering
7. If system has been discharged, report same
8. Pressure gauge in proper range
9. Check cartridge weight
10.Inspect cylinder and mount
11.Operate system from terminal link
12.Test for proper operation from remote
13.Check operation of micro switch
14.Check operation of gas valve
15.Clean nozzles
16.Proper nozzle covers in place
17.Check fuse links and clean
18.Hydrostatic test date(s)
19.Next hydrostatic test maintenance due date
COMMENTS:
On this date, the above system was tested and inspected in accordance with procedures of the presently adopted editions of
NFPA 17, 17A, and the manufacturer’s manual and was operated according to these procedures with results indicated above.
The above service technician certifies that the system was personally inspected and found conditions to be as indicated on this report.
X
SERVICE TECHNICIAN PERMIT NO. DATE TIME AM PM CUSTOMER’S AUTHORIZED AGENT
DATE OF SERVICE
TIME
ADD picture(s) of appliance line(s) showing nozzle locations as ST job attachment
YES NO n/a YES NO n/a
N/A
LIST OF
NOZZLES ON
SYSTEM
**ARM SYSTEM UPON COMPLETION
*
NOTE DEFICIENCIE BELOW UNDER COMMENTS
Bakery
Kidde
400 T
X
400
4 gal
Schnucks Lindell
1
N/a
St. Louis
G64509
2020
2020
(314) 533-8027
227
Robert henry
✔
4/22/21
✔
2 nozzles over donut fryer
4/22/21
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11694 Lackland Road
St. Louis
MO
✔
Nitrogen
✔
✔
✔
✔
✔
✔
✔
✔
2020
2032
1 duct 1 plenum
TOLL FREE: 888-4-MARMIC
(627642)
CUSTOMER
Name
Address
City
Telephone
Store No.
Owner or Manager
Range Hood Systems Report
A.M. P.M.
ANNUAL SEMI-ANNUAL RECHARGE INSTALLATION RENOVATION
LOCATION OF SYSTEM CYLINDERS
MANUFACTURER MODEL NUMBER WET DRY CHEMICAL
SIZE OF SYSTEM CYLINDER SIZE
FUSE LINKS 360°F FUSE LINKS 450°F FUSE LINKS 500°F OTHER
FUE
L
S
HUT-OF
F
ELECTRIC GAS SIZE
SERIAL NUMBER
NEW OR LAST HYDRO TEST DATE
LAST RECHARGE DATE
MANUFACTURER’S MANUAL REFERENCE
PAGE NUMBER: DRAWING NUMBER:
COOKING APPLIANCE LOCATIONS:
No
2
0. Replaced fuse links
21. Check travel of cable nuts/S-hooks
22. Piping & conduit securely bracketed
23. Proper separation between fryers & flame
24. Proper clearance-flame to filters
25. Exhaust fan in operating order
26. All filters replaced
27. Fuel shut-off in on position
28. Manual & remote set/seals in place
29. Replace systems covers
30. System operational & seals in place
31. Slave system operational
32. Clean cylinder & mount
33. Fan warning sign on hood
34. Personnel instructed in manual operation of system
35. Proper hand portable extinguishers
36. Portable extinguishers properly serviced
37. Service & Certification tag on system
38. System UL-300 Compliant?
Yes
1. All appliances properly covered w/correct nozzles
2. Duct and plenum covered w/correct nozzles
3. Check positioning of all nozzles
4. System installed in accordance w/MFG UL listing
5. Hood/duct penetrations sealed w/weld or UL device
6. Check if seals intact, evidence of tampering
7. If system has been discharged, report same
8. Pressure gauge in proper range
9. Check cartridge weight
10.Inspect cylinder and mount
11.Operate system from terminal link
12.Test for proper operation from remote
13.Check operation of micro switch
14.Check operation of gas valve
15.Clean nozzles
16.Proper nozzle covers in place
17.Check fuse links and clean
18.Hydrostatic test date(s)
19.Next hydrostatic test maintenance due date
COMMENTS:
On this date, the above system was tested and inspected in accordance with procedures of the presently adopted editions of
NFPA 17, 17A, and the manufacturer’s manual and was operated according to these procedures with results indicated above.
The above service technician certifies that the system was personally inspected and found conditions to be as indicated on this report.
X
SERVICE TECHNICIAN PERMIT NO. DATE TIME AM PM CUSTOMER’S AUTHORIZED AGENT
DATE OF SERVICE
TIME
ADD picture(s) of appliance line(s) showing nozzle locations as ST job attachment
YES NO n/a YES NO n/a
N/A
LIST OF
NOZZLES ON
SYSTEM
**ARM SYSTEM UPON COMPLETION
*
NOTE DEFICIENCIE BELOW UNDER COMMENTS
Behind deli
Pyro chem
PCL 300
X
300/300
300/300
Schnucks Lindell
4
1.25
St. Louis
798719/298650
2018
(314) 533-8027
227
✔
Fryers need shifted back under nozzles
4/22/21
✔
8 appliance nozzles cover 4 fryers and 1 steamer
4/22/21
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11694 Lackland Road
St. Louis
MO
✔
16 g
✔
✔
✔
✔
✔
✔
✔
✔
2018
2030
1 duct 1 plenum
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Range Hood Systems Report (City of Oakland)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 29 April 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document