» Surface mount – ceiling or wall;
13"Dia.×3"D (MR13FFL), 17"Dia.×4"D (MR17FFL)
» Peace of Mind Guarantee
against breakage available
» Dust and water protected to IP64 standards
» Full cut-off for IDA-Approved
Dark Sky installations
Ceiling Mount only.
» ADA compliant
BASEPLATE: Marine grade die-cast aluminum. Integral heat sinks. Baseplate ange interlocks and wraps around lens base producing maximum moisture deection and resistance to prying.
Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting breakouts. Standard matte black, dark bronze or matte white exterior TGIC polyester
powder coat – 5-step pre-treatment.
REFLECTOR: Full reector/wire cover – 92% reectivity.
LENS: UV-stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured
with one concealed captive Torx
with center pin fastener.
LENS BASE: High impact resistant, injection molded matte black, dark bronze or matte white polycarbonate.
GASKETING: Die-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens
base, baseplate and optional surface adapter.
HARDWARE: One stainless steel Torx
with center pin fastener.
ELECTRICAL: Available in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard
0-10V dimming with 1-100% range; maximum driver source of 200 μA.
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WARRANTY: Limited ve (5) year LED warranty.
LISTINGS: Luminaire is certied to UL Standards by either Underwriters Laboratory or Intertek Testing Laboratory for Wet Location. (listing includes Emergency Battery Pack “LEL” option). UL certied
IP64 per IEC 60598. IESNA-designated full cut-off.
IESNA designated "Full Cutoff" when ceiling mounted.
PP Pearlescent Polycarbonate
MB Matte Black
MW Matte White
DB Dark Bronze
LEL-SA LED Emergency Battery Backup with Die-cast
Surface Adapter (SA)- Non ADA (n/a with 347V)
BPC-SA Photo Control – Shielded Button Type with Die-cast
surface adapter (SA) – Non ADA (120 or 277V only)
FS Single Fuse & Holder
NAT Natatorium Environment Option
RMP‡ Retrot Mounting Plate (See Tech Sheet)
SA Die-Cast Surface Adapter
‡ n/a with Surface Adapter
† n/a with BPC
www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specication sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
10L35K 10 Watt 3500K LED
10L40K 10 Watt 4000K LED
10L50K 10 Watt 5000K LED
20L35K 20 Watt 3500K LED
20L40K 20 Watt 4000K LED
20L50K 20 Watt 5000K LED
15L35K 15 Watt 3500K LED
15L40K 15 Watt 4000K LED
15L50K 15 Watt 5000K LED
25L35K 25 Watt 3500K LED
25L40K 25 Watt 4000K LED
25L50K 25 Watt 5000K LED
120 120 Volts
277 277 Volts
347† 347 Volts
DV† 120-277 Volts
MR13/MR17 SERIES – FLAT FACE LOW PROFILE
Model Lamp Type Voltage
Lens Type Finish Accessories
ORDERING INFORMATION (Ex: MR13FFL-PP-DB-20L50K-DV)