Fillable Form B01: BAY COUNTY BUILDERS SERVICES DIVISION COMMERCIAL (Bay County Board of County Commissioners)

Fill Online, Printable, Fillable, Blank Form B01: BAY COUNTY BUILDERS SERVICES DIVISION COMMERCIAL (Bay County Board of County Commissioners) Form

Use Fill to complete blank online BAY COUNTY BOARD OF COUNTY COMMISSIONERS (FL) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Form B01: BAY COUNTY BUILDERS SERVICES DIVISION COMMERCIAL (Bay County Board of County Commissioners)

On average this form takes 104 minutes to complete

The Form B01: BAY COUNTY BUILDERS SERVICES DIVISION COMMERCIAL (Bay County Board of County Commissioners) form is 16 pages long and contains:

  • 1 signature
  • 0 check-boxes
  • 412 other fields

Country of origin: US
File type: PDF

U.S.A. forms for Bay County Board of County Commissioners

BROWSE BAY COUNTY BOARD OF COUNTY COMMISSIONERS (FL) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Form B01
Revised June 26, 2018
BAY COUNTY BUILDERS’ SERVICES DIVISION
COMMERCIAL PLAN REVIEW SUBMITTAL
New Commercial Structures
Please provide all applicable items listed below.
1.
ONE COMPLETE SET OF PAPER PLANS and a pdf CD drawn to scale.
Architect required unless exempted by 481.229 of Florida Statutes.
2.
The reviewed plans and development order from Planning and Zoning if issued.
3.
Method of compliance w/wind-load & wind-borne debris. WBD area is within 1 mile of coastline
and all Risk Category IV and health care structures with 140 mph or greater Vult wind design
Wind-load Design
WBD Protection
CHECK ONE
CHECK ONE
a)
ASCE 7-10
a)
N/A – Not in WBD area (1 mi. of coastline)
b)
WFCM/ICC 600
b)
Impact Resistant Shutters
c)
Other
c)
Impact Resistant Glass
d)
Wood Panel Option-Group R-3 and R-4 only
AFFIDAVIT REQUIRED
4.
Complete, notarized Building Permit Application (Form B03)
5.
Florida Energy Form
6.
Septic Tank Permit or utility sewer receipt showing tap and impact fees have been paid
7.
Well permit or receipt from utility company showing tap and impact fees have been paid
Applicant’s Signature:
Phone Number
E-mail:
………………………………….………….DO NOT WRITE BELOW DOTTED LINE…………………………………………..
INFORMATION
VALUATION
COUNTY IMPACT FEES
FEES
Stories
Type of
Construction
Library
$
Permit
$
Units
Permit Value
$
Parks
$
Plan Review
$
Square
Footage
County
Area
Fire
$
State Surcharge
$
Flood Zone
Occupancy
Classification
Roads
B/A
EB
PC
S/S
Total County Impact Fees
$
$
Notes:
Wholesale Water
$
TOTAL COUNTY FEES
$
click to sign
signature
click to edit
FORM B03
Page 1 of 2
Revised December 28, 2017
APPLICATION FOR BUILDING PERMIT
Code in effect 6
th
Edition Florida Building Code
OWNER’S NAME: Phone #:
Address:
PROJECT ADDRESS: Parcel ID
Proposed use of site:
Commercial Projects, please list name of business:
CONTRACTOR’S NAME:
Address:
Contact Phone #: Cell #: E-mail:
State License #: Competency Card:
INTENDED OCCUPANCY:
Public Lodging Establishment*
Single Family Residence
Commercial
BUILDING INFORMATION:
Residential
Commercial
Valuation of Work: $
New
Addition
Alter/Repair
Other:
Number of Stories
Number of Units
Square Ft. – U.R.:
Square Ft. – H/C:
*Pursuant to Fla. Stat. §509.013, public lodging establishment means any unit, group of units, dwelling,
building, or group of buildings within a single complex of buildings which is rented to guests more than three
times in a calendar year for periods of less than 30 days or 1 calendar month, whichever is less, or which is
advertised or held out to the public as a place regularly rented to guests. Included in this definition are
vacation rentals.
A change of occupancy or use of a building may require the owner to make application to the Building Official and
obtain the required permit for the new occupancy.
Bay County Builders Services
840 W. 11
th
ST.
Panama City, FL 32401
850-248-8350 Fax: 850-248-8384
Master Permit #__________________
Date: ___________________________
Single Family
Dock/seawall
Windows
Duplex
Storage
Doors
Multi-Family
Demolition
Vinyl Siding
Garage/Carport
Swimming pool
Shutters
Other (describe)
FORM B03
Page 2 of 2
Revised December 28, 2017
BONDING COMPANY:
Address:
City, State & Zip Code:
ARCHITECT’S/ENGINEER’S NAME:
Address:
City, State & Zip Code:
MORTGAGE LENDER’S NAME:
Address:
City, State & Zip Code:
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or
installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards
of all laws regulating construction in this jurisdiction. I understand that a separate permit must be secured for
ELECTRICAL WORK, PLUMBING, SIGNS, WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS, AIR
CONDITIONERS, and etc.
NOTICE: Bay County Builders’ Services Division does not have the authority to enforce deed restrictions or covenants
on properties. You are advised to check for any restrictions that may affect your property.
For improvements to real property with a construction cost of $2,500 or more, a certified copy of the Notice of
Commencement is required to be submitted to Builders’ Services when application is made for a permit or the
applicant may submit a copy of the Notice of Commencement along with an Affidavit attesting to its recording. A
certified copy of the Notice of Commencement must be provided to Builders’ Services and posted on the jobsite before
the first inspection can be performed.
The enforcing agency shall require each building permit for the demolition or renovation of an existing structure to
contain an asbestos notification statement which indicates the owner's or operator's responsibility to comply with the
provisions of Section 469.003, Florida Statutes, and to notify the Department of Environmental Protection of his or her
intentions to remove asbestos, when applicable, in accordance with state and federal law.
IMPORTANT: The building permit is valid as long as there is construction progress and an approved inspection is
recorded within each 180 days (6 months) period.
Owner/Agent/Contractor Affidavit
I certify that all statements, drawings, and other information submitted on and with this application are true and correct
and that all work will be done in compliance with all applicable laws. I further certify that I have reviewed the applicable
regulations associated with the proposed construction and intended use. I understand that the submittal of incorrect
information or any changes which vary from the approved plans will result in the revocation of this permit.
(Signature of Owner) Date (Signature of Contractor) Date
(Signature of Notary Public – Stamp or Seal) Date (Signature of Notary Public – Stamp or Seal)Date
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be
found in the public records of this county, and there may be additional permits required from other government entities such as
water management districts, state agencies, or federal agencies.
Form B05
Revised 5/30/12
NOTICE OF COMMENCEMENT
Permit No. Tax Folio No.
State of Florida
County of Bay
To Whom It May Concern:
The undersigned hereby gives Notice that improvement will be made to certain real property, and in
accordance with Chapter 713, Florida Statutes, the following information is provided in this Notice of
Commencement.
Description of property (legal description of the property, and street address if available):
General description of improvement:
Owner Name:
Address:
Owner’s interest in site of the improvement:
Fee Simple Titleholder Name:
Address:
Contractor Name:
Address:
Phone Number:
Payment Bond Surety:
Address:
Phone Number: Amount of Bond: $
Lender Name:
Address:
Phone Number:
Person within the State of Florida designated by Owner upon whom Notices or other documents may be
served as provided by Section 713.13(1) (a) 7., Florida Statutes:
Name
Address
Phone Number:
In addition to himself or herself, Owner designates
of to receive a copy of the Lienor’s Notice
as provided in Section 713.13(1) (b), Florida Statutes. Phone Number:
Expiration date of Notice of Commencement is one (1) year from date of recording
unless a different date is specified .
Signature of Owner
Sworn to (or affirmed) and subscribed before me this day of , 20 ,
by (name of person making statement).
Signature of Notary Public (State of Florida)
NOTARY SEAL
Personally Known or Produced Identification
Type of Identification Produced _____________________
WARNING TO OWNER: ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE
NOTICE OF COMMENCEMENT ARE CONSIDERED IMPROVER PAYMENTS UNDER CHAPTER 713,
PART I, SECTION 713.13, FLORIDA STATUTES, AND CAN RESULT IN YOUR PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED
AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE COMMENCING WORK
ON RECORDING YOUR NOTICE OF COMMENCEMENT.
Form B09
Revised 5/30/12
BAY COUNTY BUILDERS’ SERVICES DIVISION
STATEMENT FOR WATER
Site Address: _____________________________________
WELL A working potable water well located on the site which will be used
water supply to the structure. (no public utilities are available)
SEPTIC TANK A new or existing septic system located on the site will be
used. (Provide a current septic permit or existing system letter from the Bay
County Health Department before building permit can be issued.
PUBLIC UTILITIES – WATER Are available and will utilized for water to the
structure. (Provide water receipt from serving utility company indicating
available service and that all tap fees and impact fees have been paid)
PUBLIC UTILITIES – SEWER Are available and will be utilized for sewer to
the structure. (Provide sewer receipt from serving utility company indicating
available services and that all tap fees have been paid)
Owner/Agent/Contractor Signature
Date
Form B21
Page 1 of 1
Revised 10/10
TEMPORARY POWER AFFIDAVIT
STATE OF FLORIDA
COUNTY OF BAY
Permit Number: ________________________
Project Address:__________________________________________________________
I, the Contractor of Record, agree and accept all responsibility to have Temporary Power turned on at
the above listed project address. At any time prior to issuance of a Certificate of Occupancy, I
authorize the County to have power disconnected from the building or premises noted above.
I acknowledge that authorization for Temporary Power is for a period of 90 days from the date permanent power
is applied and an extension of 90 days may be granted if requested.
I affirm that this building, nor any portion thereof, shall not be occupied without the issuance of a
Certificate of Occupancy. Violation of this will result in cancellation of Temporary Power.
Contractor
Bay County Builders Services
840 West. 11
th
St.
Panama City, FL 32401
850-248-8350, Fax 850-248-8384
Form B23
Revised January 2, 2018
BAY COUNTY BUILDERS’ SERVICES DIVISION
840 W. 11
th
Street
Panama City, Florida 32401
Telephone: (850) 248-8350
Fax: (850) 248-8384
WIND-BORNE DEBRIS PROTECTION
AFFIDAVIT AND NOTICE
For the purpose of documenting the wind-borne debris protection method for the exterior glazing (windows) of the
structure located at:
I (print name) attest to the following:
1) The structure is classified as an R-3 or R-4 occupancy with mean roof height of 33 ft. or less.
2) The building is within one mile of the mean coastal high water line.
3) I have applied for a Building Permit under an exception to the required “Protection of Openings” found in the
Florida Building Code. (R301.2.1.2 and 1609.1.2)
NOTICE: This is only an option for Groups R-3 and R-4 occupancies.
Exception: Wood structural panels with a thickness of not less than
7
/
16
inch (11 mm) and a span between
lines of fasteners of 44 inches (1118 mm) shall be permitted for opening protection in buildings with a mean
roof height of 33 feet or less in locations where V
ult
is 180 mph or less. Panels shall be precut to overlap the
wall such that they extend a minimum of 2 inches (50.8 mm) beyond the lines of fasteners and attached to
the framing surrounding the opening containing the product with the glazed opening. Panels shall be
predrilled as required for the attachment method and secured with corrosion-resistant attachment hardware
permanently installed on the building.
a. Attachments shall be designed to resist the component and cladding loads determined in accordance
with either Table R301.2(2) or ASCE 7, with the permanent corrosion-resistant attachment hardware
provided and anchors permanently installed on the building.
b. As an alternative, panels shall be fastened at 16 inches (406.4 mm) o.c. along the edges of the
opposing long sides of the panel.
I. For wood frame construction, fasteners shall be located on the wall such that they are embedded
into the wall framing members, nominally a minimum of 1 inch (25.4 mm) from the edge of the
opening and 2 inches (50.8 mm) inward from the panel edge. Permanently installed anchors used
for buildings with wood frame wall construction shall have the threaded portion that will be
embedded into the wall framing based on
1
/
4
-inch (6.35 mm) lag-screws and shall be long enough
to penetrate through the exterior wall covering with sufficient embedment length to provide an
allowable minimum 300 pounds ASD design withdrawal capacity. For concrete or masonry wall
construction, fasteners shall be located on the wall a minimum of 1.5 inches (37.9 mm) from the
edge of the opening and 2 inches (50.8 mm) inward of the panel edge. Permanently installed
anchors in concrete or masonry wall construction shall have an allowable minimum 300 pounds
ASD design withdrawal capacity.
II. For concrete or masonry wall construction, fasteners shall be located on the wall a minimum of 1.5
inches (37.9 mm) from the edge of the opening and 2 inches (50.8 mm) inward of the panel edge.
Permanently installed anchors in Concrete or masonry wall construction shall have an allowable
minimum 300 pounds ASD design withdrawal capacity and an allowable minimum 525 pounds
ASD design shear capacity with a 1.5 inch edge distance. Hex nuts, washered wing-nuts, or bolts
used to attach the wood structural panels to the anchors shall be minimum
1
/
4
-inch hardware and
shall be installed with or have integral washers with a minimum 1-inch outside diameter.
III. Vibration-resistant alternative attachments designed to resist the component and cladding loads
determined in accordance with provisions of Table R301.2(2) or ASCE 7 shall be permitted.
I understand and agree to all of the above,
Signature of Owner/Agent/Contractor Date
Form B37
Revised 9/2/15
Florida Product Approval
Affidavit
In complying with Florida Law and Chapter 17 of the Florida Building Code,
I__________________________________ as the contractor/builder, attest the
structure to be built or renovated at __________________________________ will
comply with the established standards for performance of products and materials set
forth by the product approval guidelines as required by 553.842 Florida Statute and
61G20-3 Florida Administrative Code.
Information and approval numbers of the building components will be
available at the time of inspection of these products to the inspector on the jobsite: 1)
copy of the product approval; 2) the performance characteristics which the product
was tested and certified to comply with; and 3) copy of the applicable manufacturer’s
installation requirements. Further, I understand these products may have to be
removed if approval cannot be demonstrated during inspection. A copy of the
completed Product Approval Specification Sheet will be returned to Bay
County Builders Services before a Certificate of Occupancy will be issued.
_________________________________ ________________
Contractor/Builder signature Date
Form B38
Page 1 of 2
Revised 10/10
PRODUCT APPROVAL SPECIFICATION SHEET
As required by Florida Statute 553.842 and the Florida Administrative Code, please provide the information and
approval numbers on the building components listed below if they will be utilized on the construction project for which
you are applying for a building permit. We recommend you contact your local product supplier should you not know
the product approval number for any of the applicable listed products.
Category/Subcategory
Manufacturer
Product Description
Approval Number(s)
1.
Exterior Doors
A.
Swinging
B.
Sliding
C.
Sectional
D.
Roll-up
E.
Automatic
F.
Other
2.
Windows
A.
Single Hung
B.
Horizontal Slider
C.
Casement
D.
Double Hung
E.
Fixed
F.
Awning
G.
Pass Through
H.
Projected
I.
Mullion
J.
Wind Breaker
K.
Dual Action
L.
Other
3.
Panel Walls
A.
Siding
B.
Soffits
C.
EIFS
D.
Storefronts
E.
Curtain Walls
F.
Wall Louver
G.
Glass Block
H.
Membrane
I.
Greenhouse
J.
Other
4.
Roofing Products
A.
Asphalt Shingles
B.
Underlayments
C.
Roofing Fasteners
D.
Non-Structural Metal
Roofing
E.
Wood Shingles and Shakes
F.
Roofing Tiles
G.
Roofing Insulation
H.
Waterproofing
I.
Built Up Roofing Roof
Systems
J.
Modified Bitumen
K.
Single Ply Roof Systems
Form B38
Page 2 of 2
Revised 10/10
Category/Subcategory
Manufacturer
Product Description
Approval Number(s)
L.
Roofing Slate
M.
Cements-Adhesives
Coatings
N.
Liquid Applied Roof
Systems
O.
Roof Tile Adhesive
P.
Spray Applied Polyurethane
Roof
Q.
Other
5.
Shutters
A.
Accordion
B.
Bahama
C.
Storm Panels
D.
Colonial
E.
Roll-up
F.
Equipment
G.
Other
6.
Skylights
A.
Skylight
B.
Other
7.
Structural Components
A.
Wood Connectors/ Anchors
B.
Truss Plates
C.
Engineered Lumber
D.
Railing
E.
Coolers-Freezers
F.
Concrete Admixtures
G.
Material
H.
Insulation Forms
I.
Plastics
J.
Deck Roof
K.
Wall
L.
Sheds
M.
Other
8.
New Exterior Envelope
Product
The products manufacturer, description, and approval numbers can be obtained from the Florida Building Code
information system on the web @ Florida Building Code Online. I understand that at the time of inspection of these
products, the following information must be available to the inspector on the jobsite: 1) copy of the product approval; 2)
the performance characteristics which the product was tested and certified to comply with; and 3) copy of the
applicable manufacturers installation requirements. Further, I understand these products may have to be removed if
approval cannot be demonstrated during inspection. A completed copy of this Product Approval Specification Sheet
will be returned to Bay County Builders Services before a Certificate of Occupancy will be issued.
Applicant Signature Date
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Form B01: BAY COUNTY BUILDERS SERVICES DIVISION COMMERCIAL (Bay County Board of County Commissioners)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 17 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document